Bobbin not stitching

Old 10-20-2011, 05:04 PM
  #1  
Super Member
Thread Starter
 
Join Date: Sep 2011
Location: East Tennessee
Posts: 1,102
Default

I got my "new" old machine the other day and just fired it up last night. I was amazed with it for about 30 minutes, then it started skipping stitches. It was like the bobbin stopped working for a few stitches and the will stitch a few and then stop. I've rethreaded, changed needles, dusted it.... and it worked fine. Well, it started doing it again tonight! What am I doing wrong???
AshleyR is offline  
Old 10-20-2011, 05:58 PM
  #2  
Super Member
 
Join Date: May 2009
Location: Merced, CA
Posts: 4,188
Default

Going to the old book on sewing I got in a yard sale, it says about Skipping Stitches

Needle in backwards
Machine needs timing
Use correct needle
False timing, or poor needle insertion
Needle bent or burred or dull
Lint in upper or lower thread handling mechanism
Damaged Hook
Incorrect needle plate
Check spring
Poor Thread
Material not prewashed
Tension too tight
Handling material wrong==it suggests firm holding of fabrics
Burrs
I can go into further checking on these if none catches your eye and helps right away.
Ramona Byrd is offline  
Old 10-20-2011, 06:01 PM
  #3  
Super Member
 
Join Date: Nov 2010
Location: Cadillac, MI
Posts: 6,487
Default

That's the Elna, right? What kind of needle are you using and what kind of thread. Miss Elna is a bit fussy about such things. She likes Schmertz needles and the old C & C thread or Guterman - no inexpensive polyester. Take a small brush and clean out the bobbin area well - you can use a screwdriver and take it apart, too. A thread caught under that black hook deal will cause havoc. Because the Elna, like the Necchi, is engineered to high specs there is little tolerance for 'foreign' objects.
edit: In reference to the previous post, the needle threads from front to back on mine which is only a little newer than yours.
irishrose is offline  
Old 10-20-2011, 06:02 PM
  #4  
Power Poster
 
Jingle's Avatar
 
Join Date: Dec 2009
Location: Outside St. Louis
Posts: 38,181
Default

So sorry, no ideas here. I sure hope you can figure it out.
Jingle is offline  
Old 10-20-2011, 07:32 PM
  #5  
Super Member
 
Join Date: Dec 2010
Location: porter ok
Posts: 1,310
Default

Elna's are very picky about thread & lint & needles follow this advice should take care of skipped stitches.

Originally Posted by irishrose
That's the Elna, right? What kind of needle are you using and what kind of thread. Miss Elna is a bit fussy about such things. She likes Schmertz needles and the old C & C thread or Guterman - no inexpensive polyester. Take a small brush and clean out the bobbin area well - you can use a screwdriver and take it apart, too. A thread caught under that black hook deal will cause havoc. Because the Elna, like the Necchi, is engineered to high specs there is little tolerance for 'foreign' objects.
edit: In reference to the previous post, the needle threads from front to back on mine which is only a little newer than yours.
Enchanted Quilter is offline  
Old 10-20-2011, 09:34 PM
  #6  
Power Poster
 
Join Date: Jun 2009
Location: Perth, Western Australia
Posts: 10,357
Default

My old '50's Pinnock was skipping stitches...a good clean and oiling did the trick.
earthwalker is offline  
Old 10-21-2011, 01:38 AM
  #7  
Super Member
 
tellabella's Avatar
 
Join Date: Oct 2010
Location: Toronto Canada
Posts: 1,130
Default

whenever this has happened to me I put the needle in the wrong way..I have a lot of machines and the needle is all different...so I get mixed up...
tellabella is offline  
Old 10-21-2011, 02:30 AM
  #8  
Super Member
 
Join Date: Sep 2010
Location: Upper Michigan
Posts: 8,248
Default

Good luck!!
Painiacs is offline  
Old 10-21-2011, 04:24 AM
  #9  
Super Member
Thread Starter
 
Join Date: Sep 2011
Location: East Tennessee
Posts: 1,102
Default

Yes, this is the "early 70's Elna". I used the needle that came with it. No, wait! It broke! Maybe that's when I started having problems! I took the needle out of my Singer (and I did double-check and make sure I was putting it in right). Then I rethreaded the machine. And I rethreaded it again when I started having trouble.

I bet it didn't like the needle. I'll buy a new pack today and start all over again. I was also using some thread that came with my house so I'll try some new thread too.

I did try to adjust the tension and I tried different scraps (I was "quilting" when it happened, so I pulled out my cotton scraps when I started trying to fix it). I took the bobbin out and cleaned out in there (was actually quite clean) and I had oiled it before I started.

Realizing now that it happened *after* the needle broke is my V8 moment. It's weird though, because it worked good for a while and then started acting up.

I also emailed the lady I bought it from, and she said she never had that problem with that machine, but suggested adjusting the tension.

I know what I'm doing this weekend! :)

Thanks all!
AshleyR is offline  
Old 10-21-2011, 10:20 AM
  #10  
Super Member
Thread Starter
 
Join Date: Sep 2011
Location: East Tennessee
Posts: 1,102
Default

I found myself at Joanne's, so I got myself four new bobbins (because I only have one for my new machine!) and five new (Schmetz) needles. I didn't see Schmetz needles, but they had them in the display set up when you're waiting to check out!! Yay!
I also got 8 spools of quilting thread for $.49 each (150 yards). I was able to use my 50% off coupon on the needles and 20% coupon off everything else!!
AshleyR is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
miriam
For Vintage & Antique Machine Enthusiasts
8
02-24-2013 02:44 PM
miriam
For Vintage & Antique Machine Enthusiasts
12
08-14-2012 06:09 PM
miriam
For Vintage & Antique Machine Enthusiasts
28
02-10-2012 10:00 AM
MissJMac
Main
7
06-15-2011 08:58 AM
New Kris
Offline Events, Announcements, Discussions
3
06-06-2011 06:30 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter