Brother pe770-more than one design per hooping
#1
Member
Thread Starter
Join Date: Aug 2011
Location: Way out in Left Field
Posts: 9
Hi y'all,
Just beginning machine embroidery with a Brother pe770. My question is about moving the position of the hoop or needle to make more than one design in the hoop, is it possible? The reason I'm asking is for practice sake, I've been just making one letter or design per hooping, is there a way to adjust the carriage or needle to make a test design somewhere else in the 5x7 hoop?
Thanks very much
cj
Just beginning machine embroidery with a Brother pe770. My question is about moving the position of the hoop or needle to make more than one design in the hoop, is it possible? The reason I'm asking is for practice sake, I've been just making one letter or design per hooping, is there a way to adjust the carriage or needle to make a test design somewhere else in the 5x7 hoop?
Thanks very much
cj
#2
Super Member
Join Date: Oct 2010
Location: Prescott Valley, AZ
Posts: 1,329
Yes, you can do this - up to a point.
Use the layout arrows to move your design. Instructions are in the manual. Doing practice pieces is a good way to learn the limits. The machine will beep at you if you try to move a design too far.
I'm still learning to use mine also. If you have a dealer nearby who gives classes, by all means take them. I don't have a local dealer, so I'm learning the hard way.
Use the layout arrows to move your design. Instructions are in the manual. Doing practice pieces is a good way to learn the limits. The machine will beep at you if you try to move a design too far.
I'm still learning to use mine also. If you have a dealer nearby who gives classes, by all means take them. I don't have a local dealer, so I'm learning the hard way.
#10
Member
Thread Starter
Join Date: Aug 2011
Location: Way out in Left Field
Posts: 9
I haven't ventured into the USB port yet, still getting the tensions and what-not correct. Broke a needle last night and almost had a heart attack! I just knew it was the end of my machine, poor hubby just shakes his head and says "It's fine...don't freak out". Needle changed, letter b completed :)
Thread
Thread Starter
Forum
Replies
Last Post
Okay, it's between the Brother PE770 and the Janome 350. Which one can I get the bigger designs on??
sueisallaboutquilts
Main
27
03-02-2011 05:13 PM