Hand Embroidery, Puckers
#3
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,538
It is best to prevent puckers from forming in the first place. I find the new no-slip embroidery hoops are the best to keep tension on the background fabric. You might be able to mist your embroidery piece and block it to dry (with it stretched and pinned to a board). You need to make sure that your embroidery thread doesn't bleed before misting with water.
#6
I was always taught and continue to teach "DRUM TAUT"! In other words, keep that fabric so tight on your hoop that you could probably play the 1812 Overture on it!!!! (Only kidding!) But, I am known world wide for my saying "Drum Taut" (Only kidding)! Maybe the block I live in!!!! You have to have the hoop that screws, not the kid that has that bent wire that just plops into a groove. I honestly prefer a wooden hoop. I tie down my quilts (Drum Taut also) with an 18x24 oval. Good luck. Edie
#8
Super Member
Join Date: May 2009
Location: No. California
Posts: 2,130
All the "pre" advice here is very valid, but since you have already done the deed, I'd try the damp pressing on the folded towel and then mount it over a piece of batting. Pull taunt and try to work out the wrinkles.....I suppose it depends on how bad the piece is. Your call then....
#9
Super Member
Join Date: Mar 2011
Posts: 1,593
Put a bath towel on your ironing board , put your hand embroidery work face down on the towel, now put a peace of cotton fabric on top of that. steam iron it, spray it if you have to with water. good luck it works for me , I do a lot of machine embroidery.
Thread
Thread Starter
Forum
Replies
Last Post