How to sew after neck surgery
My good friend recently had neck surgery that will greatly reduce her ability to bend her head down. She is very concerned about how she will cut, sew and generally maintain her favorite hobby. Any suggestions?
|
boy, that is one to ask the Doctor or therapist for sure. lots of breaks and heat at times should help too. she may have to sit and cut, etc. getting the work more level with her than standing over it.
|
Originally Posted by EmmaJulie
(Post 5298952)
My good friend recently had neck surgery that will greatly reduce her ability to bend her head down. She is very concerned about how she will cut, sew and generally maintain her favorite hobby. Any suggestions?
With something so serious and with such high risks .... she'd better ask the trained medical personnel, rather than relying on a bunch of anxious quilters! By doing the wrong things, she may delay or recovery, or worse still cause irreversable damage. By sharing with the Drs, physio and occupational therapists her concerns, they may be able to help her figure it all out ... and maybe even make the gradual return to sewing, part of her therapy plans! |
Others with this ailment/difficulty can give hints as to what worked for them, but I agree that talking with an occupational therapist would be helpful and likely not harmful. Occupational therapists are usually with the "rehab" group, so that is a good place to look.
Changes in her set up may need to be made such as: more ergonomic placing of her sewing machine--higher and tilted, tables for cutting may need to be elevated, etc. This is what the occupational therapist can assist your friend in doing. My thoughts/prayers are with your friend for a full speedy recovery. Good Luck! |
I agree with earlier posters about asking the professionals. My only tip is maybe she should consider a cutting machine for her fabric, such as Accuquilt or Sizzix.
|
I remember seeing at one of the major quilt shows a setup for your machine on a slant. That may help, also getting the height right for the bed of the machine. Try doing a google search.
|
Originally Posted by EmmaJulie
(Post 5298952)
My good friend recently had neck surgery that will greatly reduce her ability to bend her head down. She is very concerned about how she will cut, sew and generally maintain her favorite hobby. Any suggestions?
How long ago did she have surgery? |
I agree with the others on your friend talking to her Dr.
about sewing. It is VERY important that she follow the professionals advice and not us NON professionals. Now some information about how I personally handled that same exact situation with neck surgery not once, but TWICE! I have 1 titanium plate, and 4 screws in the "front" side of my cervical (neck) the first surgery. For the second surgery done in Jan 2009 I have 2 titanium rods with screws on the "back". For both surgeries, but mainly with the first how I handled the sewing was to set my machine up on a surface that was higher then the most comfortable chair I could sit in to sew. As I had seen someone else mention that they set the machine up on a "slant" this was a BIG help for me. But the MOST important thing that I found worked for me was SLOWWWWW and easy! not spending more then 5-10 minutes (MAX) at a time. No matter if I was sewing or cutting. Yes it was a slow going process but it was the only way for me to help curb the desire to sew. But mostly what I did was go to fabric stores to look and touch fabrics and see all the notions on display. Even though it has been over 3 years since my last surgery I am still having more "issues" than I would like mostly with the nerve pain and muscle spasms. But that is neither here nor there, but it DOES limit me many days to doing NOTHING with my sewing, fabric or cutting. I wish your friend the best of luck in her recovery, tell her DO NOT over do things and DO NOT push herself to the limits of pain once in bad pain it is much harder to get out of it. |
When I had surgery on my upper back about the only restriction was NO lifting..that is within reason!
|
I suffer from a neck and shoulder injury from 18 years ago and sometimes find I have to quit for awhile, go do something else and then return to sewing/quilting. Found that if I have machines set up below shoulder level I do better. I just do what I can as long as I can and then change positions or do something else for a short period then go back to the sewing/quilting.
I would check with dr and therapist before I set up anything to cause you the least amount of pain. delma |
Thank you all for your feedback. She's only three weeks out from surgery but getting bored and so these questions are coming to mind. I'll will pass on the info to her along with your good thoughts and prayers.
EmmaJulie |
Absolutely ,,, check with docs. I agree with quilty louise. Slow and easy. lots of breaks and heat.Don't be afraid to just quit and start another day. c spine surgery is the pitts. Good luck to your friend.
|
Great question. I just came home after having a ruptured C -4, C -5 disk repaired. I'm fortunate that after almost 4 months I am home, having had to re-learn how to walk, stand, write, type etc. all over again. I still have a ways to go, but I'm thrilled to be home, and on my way to being better than I was before the fall. I guess I will adopt the "one day at a time" motto and soon I will be able to quilt and sew again, but will look forward to answers from those who have gone before. I'm just happy to have regained about 85% of my former self. I look forward to quilting again - I have missed it.
|
All times are GMT -8. The time now is 06:14 PM. |