sewNso

has any one ever seen the plastic looking counters or tables that people make/pour with coins under it? it looks to be like a real hard durable finish. does anyone know what it is called?
my daughter teaches 5th grade, and their science tables tops have all been really gouged up. and i was wondering what i/she could refinish the tops with.

what with school budget cuts etc. a refinish donation by mom or someone, would fit their budget.
any other recommendations for putting anything on top of the tables? what about a new formica roll. is that possible?
thanks ahead of time for any suggestions given.

sewwhat85

here a a couple of sites i just googled pourable acrilic table top finish http://www.finishing.com/123/62.shtml http://www.uscomposites.com/kk121.html i have not used these dont know how they work

CloverPatch

http://www.tapplastics.com/info/vide...mat=quicktime&

Is this what your refering to?
And wanting to apply it to an entire table top? It is doable, but probably expensive.

It is durable, however it will cloud and is easily scruff and scratched over constant use.

bamamama

An epoxy resin finish is what I believe you are looking for.

jaciqltznok

generally it is a Poly Resin that comes in two parts that you have to mix and pour on.
It is highly toxic and the fumes will gag you so make sure you do it outdoors and there is NO wind/dust in the air...or indoors with an extremely well ventilated area!

something like this, but I know that stores like Hobby Lobby and Michaels also sell a more user friendly one!
http://liquidglasscoating.com/

Greenheron

I believe the poured tops are made with epoxy resin. It's a two-part product and must be mixed before using. Google for more information. It's fairly expensive.

One can get very thin sheets of laminate (the Formica material you asked about) at builder's stores that must be glued on. Using this product you might also need to do something to the edges--depends on the table you're covering.

If you can find it, aluminum flashing might come wide enough for the tables and there are sheets of other metal in the big box building stores.

One more option would be to glue linoleum to the tops but I doubt it would be gouge resistant.

If the tables are wooden, sanding and refinishing would be the nicest way.

Good luck and blessings for helping your school.

sewNso

i just called her back. there are 10 tables which are about l.5 ft X 3 ft. they seat 2 pupils per table. and she said under the current finish, which looks painted she thinks, the wood appears to be compressed wood?.

so a roll of formica, might fix it easier. right?

as they are now, they have really been cut, carved, gouged, and when ever the kids write on them, the papers get holes in them. and the wood expands when it gets wet.

any ideas?

New Quilter

poly urethane???

genafan201

Yep, two part epoxy resin...I made a tray with little tiles on it that I covered with it. Jacquie is right...smells bad, no wind, no dust, but beautiful when done :)

QuiltMania

No suggestions except to have her make sure to check with administration before she does anything permanent to the furniture. Sometimes administration can be very particular about "alterations". I can't even put tacks into my walls.