Go Back  Quiltingboard Forums > Introduce Yourself
Hi From Massachusets witf a flying geese question >

Hi From Massachusets witf a flying geese question

Hi From Massachusets witf a flying geese question

Thread Tools
 
Old 09-26-2010, 01:00 PM
  #1  
Member
Thread Starter
 
Betsydrew's Avatar
 
Join Date: Sep 2010
Location: Mass
Posts: 16
Default

I've been piecing about 3 years and just in the last 9 months or so I've been doing some machine quilting. I have a pattern that calls for flying geese to be attached to a fussy cut 7.5 inch square. The directions are for traditional flying geese: 1 rectangle, 2 squares. But there is waste involved in this. I BUY plenty but this coming out of my stash and I'm afraid I may not have enough - sky or goose. So I'd like to try the 4 at a time Deb Tucker Wing Clipper method. My question is (before I buy the ruler and then find out I don't have enough fabric) What size strips do I cut for the geese and what size strips do I cut for the sky to end up with a 7.5 inch long geese block? After the block is in the quilt it will be 7.00 inches so, another question please, do I say a 7.5" finished geese block (for the block before it gets attached to a 7.5" square or do I say a 7 inch finished goose block for after it is in the sewn quilt?
Betsydrew is offline  
Old 09-26-2010, 01:04 PM
  #2  
Power Poster
 
Join Date: Oct 2009
Location: Idaho
Posts: 11,375
Default

Welcome from Idaho!
I am not familiar with this method, but there are many methods out there that do the same thing.
Sadiemae is offline  
Old 09-26-2010, 01:09 PM
  #3  
Power Poster
 
Join Date: Apr 2010
Location: Whitewater, WI
Posts: 24,528
Default

Welcome!
CarrieAnne is offline  
Old 09-26-2010, 01:43 PM
  #4  
Power Poster
 
ann clare's Avatar
 
Join Date: Apr 2010
Location: Navan. Co. Meath. Ireland
Posts: 15,110
Default

Welcome from Ireland
ann clare is offline  
Old 09-26-2010, 02:32 PM
  #5  
Super Member
 
GrammaNan's Avatar
 
Join Date: Nov 2009
Location: Colorado
Posts: 4,879
Default

Sew glad to meet you! Welcome from Colorado.
GrammaNan is offline  
Old 09-26-2010, 02:38 PM
  #6  
Super Member
 
Join Date: Mar 2010
Location: Elmira, NY
Posts: 6,113
Default

Welcome from New York state!
wolfkitty is offline  
Old 09-26-2010, 03:13 PM
  #7  
Super Member
 
raptureready's Avatar
 
Join Date: Feb 2010
Location: Illinois
Posts: 5,142
Default

First of all, welcome to the board. I'm not familiar with this method but I also don't waste the cut off fabric from flying geese. After you sew the goose seam move over 1/2 toward the corner and sew another seam. When you cut off the waste part you'll have a half square triangle block. Just put them in a baggie until you have enough to make a block then sew them together. Or just keep stashing them until you have enough for a scrappy couch throw or if you don't want a scrappy couch throw, make them into a lap quilt or two and donate them to a nursing home.
raptureready is offline  
Old 09-26-2010, 04:08 PM
  #8  
Super Member
 
Join Date: Jun 2010
Location: Hartford, Mo
Posts: 5,781
Default

Welcome!!! I have the templates from Quilt in a day for small and large flying geese, and others I have forgotten where I did get them.. now I just use the one seam method from Alex Anderson and Rick Tims U-Tube idea they say is from England. Love it. No waste. For 18 inch block, use two squares, each 3.5 inches, and sandwiched inside is a 6 inch rectangle. First square is face up, rectangle folded at top, right side up, match the bottom edge, add top square face down and sew on right side only 1/4 inch seam. Open "sandwich book" and press, pull the goose gently open. Proportion the ratio smaller or larger for various sizes. Picked it up on this board and love it.
QuiltingNinaSue is offline  
Old 09-26-2010, 04:22 PM
  #9  
Super Member
 
Join Date: Apr 2007
Location: Alturas, CA
Posts: 9,393
Default

Eleanor Burns has a method of doing 4 geese at one time and you don't need a special ruler.

1. Cut a square of geese fabric the finished width of the geese unit plus 1 1/4 inches. Cut the sky fabric the finished height of the geese unit plus 7/8". For example: the width is 4" you will cut a square 4 7/8". The height is 2" you will cut a square 2 7/8"

2. Cut one geese fabric and four sky fabrics.

3. With right sides together lay 2 of the small squares on opposite corners on the large square. Using a ruler draw a pencil line diagonally from top left corner to bottom right corner. (See example)
4. Stitch 1/4" from both sides of the drawn line. Cut apart on the center line. Press toward sky fabric.

5. Draw a diagonal line on the 3rd and 4th sky fabric squares. With right sides together place one sky square on the sewn unit. Place it on top of the geese fabric with one corner coming between the sky triangles.

6. Stitch 1/4" on both sides of drawn line. Cut on diagonal line. Repeat for other unit.
7. Press your four geese units. You are ready to use them in a quilt.
pocoellie is offline  
Old 09-26-2010, 05:17 PM
  #10  
Power Poster
 
Join Date: Oct 2009
Location: Idaho
Posts: 11,375
Default

I like the Ricky Tims method also. He learned it in Australia I think. I haven't made very mean but I like it.
Sadiemae is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cizzors
Main
3
03-14-2011 04:33 PM
mumtoliam
Main
9
11-09-2008 07:17 AM
bearpaw
Main
14
11-03-2008 05:06 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter