Can it be that difficult??
#21
this is how I also do mine.
I don't use any gadgets and my bindings come out great. What I do is I press one end of each strip at an angle. Then I glue baste the strips together and sew them. I fold the long strip in half and press. Sew to the top. When I get around to the end, I open out the end that I pressed, overlap the ends and mark where to cut using the measurement of the original strip as the overlap amount (i usually use 2.5"). Then I refold the end I pressed, tuck the other end into the fold, glue baste, sew the angle and sew the strip to the quilt. Comes out perfect everytime.
#22
Lisa, does it really matter if you have to read the tutorial. I still have to read the instructions too. Still worth it though. It's not like we bind a quilt every day so of course it's going to take longer for us to remember. Besides we girls have to remember so much a little help every now and then is not such a bad thing. Happy Binding.
#23
I have also tried the Binding Tool, and just don't get it.
I found this video several years ago, and it depicts how to sew your binding on, without seeing where it starts and stops.
http://www.youtube.com/watch?v=Ot7Trk6J2Vw
So, I continue to do it this way. Here are a few pics of how to do it.
[ATTACH=CONFIG]430685[/ATTACH]
[ATTACH=CONFIG]430686[/ATTACH]
[ATTACH=CONFIG]430687[/ATTACH]
[ATTACH=CONFIG]430688[/ATTACH]
[ATTACH=CONFIG]430689[/ATTACH]
[ATTACH=CONFIG]430690[/ATTACH]
I find this so much easier than trying to use the binding tool. Hope this helps.
I found this video several years ago, and it depicts how to sew your binding on, without seeing where it starts and stops.
http://www.youtube.com/watch?v=Ot7Trk6J2Vw
So, I continue to do it this way. Here are a few pics of how to do it.
[ATTACH=CONFIG]430685[/ATTACH]
[ATTACH=CONFIG]430686[/ATTACH]
[ATTACH=CONFIG]430687[/ATTACH]
[ATTACH=CONFIG]430688[/ATTACH]
[ATTACH=CONFIG]430689[/ATTACH]
[ATTACH=CONFIG]430690[/ATTACH]
I find this so much easier than trying to use the binding tool. Hope this helps.
#24
A forum member posted instructions several,years ago and I guess it is basically the same as the others. Both ends
must be trimmed and the last end is tucked into the first end and you end up with a very smooth finish. By cutting the angle on both, a lot of bulk is eliminated.
must be trimmed and the last end is tucked into the first end and you end up with a very smooth finish. By cutting the angle on both, a lot of bulk is eliminated.
#26
I feel the same way. I find using that tool makes something pretty easy into a confusing task. There is a tutorial I found by Konda Luckau that I find most helpful: www.moosequilts.com/BindingTutorialWeb.pdf. See if it helps you!
#28
Super Member
Join Date: May 2011
Location: Florida - formerly Montana
Posts: 3,504
http://www.mccallsquilting.com/mccal...ining_the_Ends
#29
Super Member
Join Date: Oct 2008
Location: The Finger Lakes of upstate NY
Posts: 3,572
This is how I do it also. Here is the link (just in case you don't have enough videos. LOL)
http://www.mccallsquilting.com/mccal...ining_the_Ends
http://www.mccallsquilting.com/mccal...ining_the_Ends
#30
Super Member
Join Date: Aug 2011
Location: kansas
Posts: 6,407
I had to laugh at this thread! I go the binding tool, watched both the original and the updated MQC tutorial several times, even took notes! Saw a vendor at a show and studied what she said to do, even took notes on that! And once I actually did it right--think that I just got lucky! Now I use the Fons & Porters method--almost. The key thing is to leave a 1/4" gap between the two ends and then pin/mark the angles. NOW, the binding tool does make a real handy ruler for making a braid quilt--there's a tut on MQC for that too!
Thread
Thread Starter
Forum
Replies
Last Post