Go Back  Quiltingboard Forums > Main
1/4 foot >

1/4 foot

1/4 foot

Old 02-25-2013, 09:28 AM
  #1  
Junior Member
Thread Starter
 
mimmy96's Avatar
 
Join Date: Jan 2013
Location: Illinois
Posts: 246
Default 1/4 foot

I am new to quilting... I have read that I need a 1/4 foot for my machine for piecing. I looked online.. Am I just needing the basic one, or the one with guide? My machine already came with a walking foot, so I am good there! Getting ready to start working on my very first quilt! Yay!
mimmy96 is offline  
Old 02-25-2013, 09:42 AM
  #2  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,444
Default

My Bernina comes with a good 1/4 foot but Bonnie Hunter uses a guide on her antique machines. Click on her Tips & Techniques on www.quiltville.blogspot.com and the title is Best Seam Guide Ever? She uses a piece of hotel key card and 3m command strip on the bed of the machine to run the fabric along at the right distance from the needle. Perhaps this method would work for you without having to buy a special foot?

Last edited by Tartan; 02-25-2013 at 09:48 AM.
Tartan is offline  
Old 02-25-2013, 09:51 AM
  #3  
Senior Member
 
Skyangel's Avatar
 
Join Date: Feb 2012
Location: Oregon
Posts: 809
Default

I have both, and I realy like the one with the guide. I get more consistant seam size. If you can move your needle position over 1 click to the right, you have a perfect scant 1/4". Have fun with your first quilt!
Skyangel is offline  
Old 02-25-2013, 10:00 AM
  #4  
Junior Member
 
totosmom's Avatar
 
Join Date: Aug 2011
Location: Bedford Co, PA
Posts: 256
Default

Hmm, well I was using my 1/4" foot with the guide recently and remembered why I don't like it. I can't seem to pull my pins out quickly enough for it and they pull the seam out of alignment. It also doesn't let me sew over seams very well.

My all time favorite 1/4" foot is the Little Foot. It's clear plastic with bright red markings all around. Best $22 I ever spent for these aging eyes.
totosmom is offline  
Old 02-25-2013, 10:30 AM
  #5  
Power Poster
 
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Default

I don't like using a 1/4 foot for machine piecing. I use an adhesive guide on the bed of my machine to create a physical barrier for my fabric to butt up against. I can sew even seams much, much faster this way. I have cut and used moleskin for the barrier (available in the foot section of any pharmacy), sometimes layering it two levels. Currently am using a Dritz adhesive guide, as they are precut and have a nice height:
http://www.amazon.com/Dritz-Quilting...dp/B0085L2Y2I/

I do not recommend the associated red ruler Dritz sells for establishing the 1/4". I measured it, and it creates an exact 1/4" seam rather than the scant 1/4" that we quilters prefer.

I use one of my shorter rulers to establish the seam allowance. I place the ruler on the bed of the machine, lower my needle so it is at a scant 1/4", lower the presser foot to keep the ruler in place, check that the ruler is running straight from front to back, then place the adhesive guide butted up next to the ruler. Instead of a ruler, a lined index card would work too, or graph paper marked in 1/4" squares.
Prism99 is offline  
Old 02-25-2013, 10:32 AM
  #6  
Junior Member
 
Join Date: Oct 2012
Location: Texas
Posts: 121
Default

I have sewn garments and interior decorating for years. I got use to making the wider seams and even using a regular foot with the 1/4 markings I found I was still making the seams too wide for quilting. I bought the 1/4" foot with the guide from Amazon and I LOVE it. I don't sew too much with pins but when I have to use a pin I try and put it in from the left, that way I can pull it out closer to the foot than when I put it in from the right.

The only thing I don't like about the foot is I have a top loading bobbin and I have to raise the pressure foot to take the plastic cover off the bobbin case. I have no problems going over seams because I turn one, one way and the other one the other way. That keeps the seams from being too thick and lets them match more.
mcfay is offline  
Old 02-25-2013, 10:37 AM
  #7  
Super Member
 
NikkiLu's Avatar
 
Join Date: May 2010
Location: So. Central MO
Posts: 2,759
Default

Well, you really don't have to have a special 1/4 foot - just measure from your needle to the edge of your fabric and adjust your needle position if you can. Follow those ideas above about measuring and marking your bed of your machine and you will do fine.
NikkiLu is offline  
Old 02-25-2013, 10:38 AM
  #8  
Super Member
 
Join Date: Apr 2011
Posts: 3,812
Default

If you are going to buy one I would go with the one with the guide. I have both and rarely use the one without the guide.

Kat
GreatStarter is offline  
Old 02-25-2013, 10:41 AM
  #9  
Power Poster
 
BellaBoo's Avatar
 
Join Date: Jan 2009
Location: Front row
Posts: 14,646
Default

I have both. I use the one with a guide on the machine that I can move the needle. I found the guide is a little bigger then 1/4" if my needle is in a fixed middle position. The Brother 1/4" snap on foot that Walmart sells will fit my Janome Jem and has outlasted the one I bought at the Janome dealer. The foot for my Bernina doesn't have the guide but I seldom piece with the Bernina.
BellaBoo is offline  
Old 02-25-2013, 10:48 AM
  #10  
Senior Member
 
Join Date: Feb 2013
Location: NE California - no where near the Bay Area!
Posts: 346
Default

It wasn't until I bought a 1/4 inch foot that I realized I was not sewing a 1/4 inch seam but more like a 3/8 inch seam. I'm excited to try a quilt square with triangles to see if that will help me match up the seams and points better. Before I bought the quilting foot, I tried marking my machine, but I learned that I guide the fabric through the machine by looking at the foot. So, marking the machine really didn't make a difference for me. I have a Brother machine and spent $9 on the quilting foot at WalMart.
Ranchwife is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trrmite
Main
21
10-20-2011 05:11 PM
quiltwhisperer
Main
15
11-22-2010 10:29 AM
StitchnFind
Main
11
07-12-2010 07:59 PM
Debbie B
Main
17
06-03-2010 06:31 AM
scrapcollector
Main
12
11-02-2009 07:33 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter