Go Back  Quiltingboard Forums > Main
Fabric not feeding >

Fabric not feeding

Fabric not feeding

Old 12-09-2010, 07:08 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Dec 2010
Location: near San Antonio
Posts: 138
Default

Okay, so I'm trying to sew along, minding my own business, and all that, but sometimes the feed dogs just stop moving the fabric. They go up and down and forward and back, but the fabric doesn't move. This usually happens when working over a seam allowance, but sometimes it also happens at the beginning of a block with only two layers of fabric! It makes an ugly knot and pulls at the fabric, and sometimes it even pulls the fabric down into the needle plate so bad I have to cut it out!

Does anyone know anything I can do to make it work? I figure a walking foot would probably help, but I just can't afford it right now .

Thanks in advance,
Sloan
Sloan Quinn is offline  
Old 12-09-2010, 07:12 AM
  #2  
Super Member
 
amandasgramma's Avatar
 
Join Date: May 2009
Location: La Pine Oregon, USA
Posts: 5,907
Default

At beginning of a block......fold a small piece of fabric (2" square??) and start your sewing in the middle of that, then chain stitch into your block.

Have you cleaned out the bobbin area and the feed dog area lately??? I'm not sure, but the feed dogs stopping working in the middle of your seam........hmmmmmm seems like that's something for the repairman if you've cleaned out the lint, etc.....never heard of it happening. Maybe someone else knows.
amandasgramma is offline  
Old 12-09-2010, 07:15 AM
  #3  
Senior Member
 
Obsessed's Avatar
 
Join Date: Nov 2010
Location: Probably not where I should be...
Posts: 691
Default

I have that same beginning of the block problem - Amandasgramma - your advice is brilliant! I will try that!
Obsessed is offline  
Old 12-09-2010, 07:17 AM
  #4  
Super Member
 
Grama Lehr's Avatar
 
Join Date: Jun 2009
Location: Rancho Cucamonga, CA
Posts: 4,783
Default

Try re-treading your machine!
Grama Lehr is offline  
Old 12-09-2010, 07:18 AM
  #5  
Power Poster
 
Join Date: Oct 2009
Location: Idaho
Posts: 11,375
Default

Are you holding your threads at the beginning of a seam. That might help. I don't really know any of the reasons it would do it during the seam. If you are doing a lot of piecing, you might want to use leaders or enders to keep the thread from going down into the feed dogs. You might check for lint under the feed dogs and around the bobbin.
Sadiemae is offline  
Old 12-09-2010, 07:32 AM
  #6  
Super Member
 
Join Date: Aug 2009
Location: The middle of an IL cornfield
Posts: 7,014
Default

I have a cheap little Brother machine and it will occaisionally do that going over a heavy seam. I just assumed it was because the thickness was too much for the machine. I just give a gentle tug to help it along and then it gets happy again.
Lisa_wanna_b_quilter is offline  
Old 12-09-2010, 08:05 AM
  #7  
Senior Member
 
ncsewer's Avatar
 
Join Date: Apr 2010
Location: North Carolina
Posts: 745
Default

I would think that when you go over a seam it changes the angle that the foot has on the fabric changes, and in your case there isn't enough pressure down to the feed dogs to keep things moving. I agree that a little tug from your end to help it move and the next time you get it cleaned, see if they can adjust the feed dogs up just a little, maybe they are wearing a bit and don't get quite the bite they used to.
ncsewer is offline  
Old 12-09-2010, 08:22 AM
  #8  
Super Member
 
scowlkat's Avatar
 
Join Date: Jul 2010
Posts: 2,500
Default

Also check to see if your machine has a manual adjustment for the foot pressure. If so, make sure it is set for the proper setting. When you clean your machine, as suggested, be sure to clean the feed dogs using a small brush to clean between the teeth - gee I sound like a dentist!
scowlkat is offline  
Old 12-09-2010, 10:17 AM
  #9  
Junior Member
Thread Starter
 
Join Date: Dec 2010
Location: near San Antonio
Posts: 138
Default

Thank you all for your advice! I know that there is no manual adjustment for the foot pressure, and I check for lint every time I change the bobbin, so that's out. I'll have to see if the Singer store nearby can adjust the height on the dogs, I suppose.

Thank you all very much.
Sloan
Sloan Quinn is offline  
Old 12-09-2010, 11:14 AM
  #10  
Power Poster
 
amma's Avatar
 
Join Date: Jul 2007
Location: Out searching for some sunshine :-)
Posts: 58,856
Default

Some machines do "balk" at the seam lines... slow down there and help the fabric along :wink: :D:D:D
amma is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kristin476
Main
22
07-10-2016 06:11 PM
Deb watkins
Main
10
10-23-2015 03:37 PM
Genierose
Main
6
04-17-2015 06:32 PM
quid_pro_quo
Main
18
10-15-2009 02:33 PM
tlrnhi
Pictures
45
04-30-2009 02:54 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter