Go Back  Quiltingboard Forums > Main
Argument over sewing over pins! >

Argument over sewing over pins!

Argument over sewing over pins!

Old 09-23-2012, 05:16 AM
  #1  
Super Member
Thread Starter
 
QultingaddictUK's Avatar
 
Join Date: Jan 2011
Location: North Wales UK
Posts: 2,028
Default Argument over sewing over pins!

I NEVER EVER sew over pins, and impress upon my pupils to do the same then I had a visit yesterday from my gentleman volunteer for Project Linus quilts, and we started discussing needle breakages, I had just broken 5 in one evening, don't ask, and he said he rarely breaks needles just on the odd occasion when he sewed over a pin and hit it!

I was horrified, his wife agreed with me, but his reply was, what is the difference in hitting a pin and hitting a foot or the sewing plate, you know when you have the wrong one in!

I didn't have an answer, do you?
QultingaddictUK is offline  
Old 09-23-2012, 05:39 AM
  #2  
Super Member
 
Join Date: Oct 2010
Location: howell, Mi
Posts: 2,345
Default

All the needles I have are the right ones for all 3 of my machines. I used to sew over pins, but the damage to the machine isn't worth it. One problem with sewing over pins is sometimes the needle isn't broken just bent. That could upset the timing on your machine. I have had the needle and the pin break and go into the hole in the sole plate. Lucky not to have any damage but a terrible time getting the pieces out. Not worth it, IMHO.
Sue
susie-susie-susie is offline  
Old 09-23-2012, 06:04 AM
  #3  
Super Member
 
Join Date: Dec 2010
Location: Norfolk, VA
Posts: 5,397
Default

I used to sew over them all the time and rarely had a problem. Then I got my Kenmore and if I sewed over a pin it would break the thread at the very least. I got tired of rethreading the machine so I started taking them out. I had a teacher who said no, you are not supposed to sew over them but also said if you put them in at an angle they won't hit the needle. I try to put my pins in now at an angle just in case I forget to take one out. The only time I can't put them in at an angle is when I'm piecing and I need for two seams to match up. The biggest difference in hitting a pin, or foot or the sewing plate is that the last two cost more to fix or replace. Hitting a pin can cause your needle to bend and then ruin your plate; it's just not worth it.
romanojg is offline  
Old 09-23-2012, 06:14 AM
  #4  
Super Member
 
Join Date: Dec 2011
Location: Virginia
Posts: 1,257
Default

Well, when you hit the foot or plate you know something is not right. You've got the wrong part in, have it in wrong, something's not lined up properly. When you hit the pin you've deliberately left something in the way. I occassionally leave a pin in and usually don't have a problem. But, honestly, it's usually because I'm being lazy. If I really want to leave the pin in to make sure I get the stitch in the correct place I sew really slowly and take the pin out immediately before the needle goes in the fabric. Many years ago I sewed over a pin and it broke the needle and thread. I tiny part of the needle flew up and into my eye. It stayed down in the pink part of my eye-where you pull the skin down under the eye (if that make sense). I wore contact lenses and was used to putting my fingers in my eyes so I was fortunately able to get it out without too much trouble. I still prefer to wear my glasses when I sew, just in case!
CindyA is offline  
Old 09-23-2012, 06:18 AM
  #5  
Super Member
 
DogHouseMom's Avatar
 
Join Date: Jan 2011
Location: Knot Merrill, Southern Indiana
Posts: 5,781
Default

I use very long (and thin) pins so I can insert them so the tip of the pin falls short of where the needle will hit. That said, sometimes I insert one a bit too far and it's far enough that the needle may glance off of it. I've never broken a pin or needle from hitting a pin.

On the Sally Collins video she sews over pins all the time and said that machine speed is the difference between sewing "over" pins and breaking/bending them. I noticed she uses the same long thin pins I use.

So possibly just slowing the machine down is the answer, coupled with very thin pins.

I typically run my machine at a fairly slow speed unless I'm FMQ'ing. I think that is a product from my 7th grade Home Ed teacher yelling "quit racing those machines!!".
DogHouseMom is offline  
Old 09-23-2012, 06:20 AM
  #6  
Super Member
 
Deborahlees's Avatar
 
Join Date: Mar 2011
Location: Wine Country-Southern California
Posts: 1,449
Default

I sewed over a pin ONCE, needle broke in two and hit my glasses....it I had not been wearing glasses at the time, the broken needle would have gone into my eye. Since that day I have never sewn over a pin, it is not the damage to the needle, or sewing machine or whatever, what about your own personal safety !!!!!!!
Deborahlees is offline  
Old 09-23-2012, 06:26 AM
  #7  
Super Member
 
Join Date: Apr 2010
Location: Illinois
Posts: 9,312
Default

My Mom would shutter if she knew how many times I have sewn over pins. Its my single worst habit. But I do at least slow down when approaching a pin.
In my defense , there are times when matching up a really tough area.. its just seems like the best method to keep it all exactly in place till its stitched.
Lori S is offline  
Old 09-23-2012, 06:34 AM
  #8  
Power Poster
 
BellaBoo's Avatar
 
Join Date: Jan 2009
Location: Front row
Posts: 14,646
Default

My rule for sewing over pins is sometimes I sew over pins, sometimes I take them out. I never break my rule. LOL
BellaBoo is offline  
Old 09-23-2012, 06:43 AM
  #9  
Senior Member
 
Toni C's Avatar
 
Join Date: Mar 2009
Location: Crosby,Texas
Posts: 849
Default

I would think possible cost would be the difference. If you mess the timing up there you go. Now if you break a pin and it flies in your eye I would think that could cost you a fair amount too.I guess it's like this. Why do something that could cost you when it's easy,and no skin off your tail to avoid. You are going to have to take them out at some point anyway,why not then?
Toni C is offline  
Old 09-23-2012, 06:52 AM
  #10  
Super Member
 
Join Date: May 2010
Location: Orbiting
Posts: 1,448
Default

I only leave the pins in when I can't get it to stay in the right place any other way. In those instances, I slowly sew a stitch length away from the pin/pins, then hand crank the machine over it that way if it does hit a pin it's barely touching it and can be moved enough to sew past it.

A lot of times I will pin to the left of the needle so that I can pull the pins back some without totally removing them.

The only time I broke a needle was when I was free motion quilting and ran over a safety pin. I took the machine apart and did a good cleaning and oiling. Then started relying more on spray basting rather than pin basting.
AlienQuilter is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
glassnquilts
Main
48
02-19-2018 09:39 AM
retiredteacher09
Pictures
15
07-31-2016 06:34 AM
madamekelly
Recipes
91
12-12-2014 09:07 AM
Old hen
Main
64
12-28-2012 05:21 PM
Roben
Pictures
26
05-02-2008 01:20 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter