FMQ

Old 04-14-2011, 07:39 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Mar 2011
Location: Kinder, La
Posts: 116
Default

First time FMQ and top thread kept breaking. Don't know what I was doing wrong? Do yall have any idea?
rburnitt is offline  
Old 04-14-2011, 07:45 AM
  #2  
Senior Member
 
lllog's Avatar
 
Join Date: Nov 2010
Location: Camdenton MO
Posts: 453
Default

Maybe, if I kne4w what FMO meant. As far as top tention breaking, generally thats because of the runs that the thread goes through.

This may help:

Thread Breakage
There are three common reasons for your thread to break on you;

A. Stress Break
B. Clean Break
C. Hook Break

Stress Break

Stress breakage occurs when your thread is snagged and can not be pulled as you quilt. There can be several reasons for this;

a. Thread unwinding unevenly from the spool causing it to wrap around something on the machine.

b. Thread snagging on one of the thread guide.

c. Top tension set to high.

d. Thread is old


Whichever the reason, you can generally tell a how a thread has been broken by looking at it. The figure to the right illustrates a stress breakage.

Clean Break

Clean cuts generally occur most often when cut by a burr. A burr is a sharp edge that has been caused by the needle striking another metal object. The thread looks as if it has been cut by scissors. The figure to the right illustrates this type of breakage.


Hook Break

A hook breakage is fairly easy to determine. Generally a few fibers will be hanging to the side while another group of fibers are bunched up a little higher on the thread. The figure to the right illustrates this type of breakage. This occurs most often when your timing is off. The hook may be too far from the thread when it tries to grab it, and only catches the outside fibers. A burr on your hook point can also causes this to occur.

Some fixes for the breakages above include placing small scraps of batting in the thread guides to maintain thread travel. Always use all of your thread guides when quilting, but don’t add new ones.

Remember that the proper tension is set by the machine being threaded correctly. Some people have purchased added gadgets to set their tension, that’s usually not needed if you follow the manufacturer’s guidelines.

Hope that this helps,

Lanny
lllog is offline  
Old 04-14-2011, 07:49 AM
  #3  
Power Poster
 
nativetexan's Avatar
 
Join Date: Feb 2009
Location: home again, after 27 yrs!
Posts: 19,388
Default

also use cotton thread and perhaps a larger eye needle.
nativetexan is offline  
Old 04-14-2011, 08:01 AM
  #4  
Member
 
Michelle's Avatar
 
Join Date: Jul 2009
Location: Ohio
Posts: 34
Default

I had that problem when I first started free motion quilting & it was often because I was moving the fabric faster than the needle & the thread was stretched too tight. I tried to slow down the fabric movement, but I found it was better to increase the needle speed. I sew much better fast than slow.

Don't be afraid to put your foot down! It takes time to get an even stitch length (unless you have a stitch regulator) but the more you practice, the better you'll get.

Also, I avoid free motion quilting on batiks. Their heavier thread count often causes breakage.
Michelle is offline  
Old 04-14-2011, 09:02 AM
  #5  
Junior Member
Thread Starter
 
Join Date: Mar 2011
Location: Kinder, La
Posts: 116
Default

It sounds like a hook break. No pictures showing. I rethreaded each time it broke and used cotton thread. I don't understand what you mean by adding batting.
Regina
rburnitt is offline  
Old 04-14-2011, 09:05 AM
  #6  
Junior Member
Thread Starter
 
Join Date: Mar 2011
Location: Kinder, La
Posts: 116
Default

Originally Posted by Michelle
I had that problem when I first started free motion quilting & it was often because I was moving the fabric faster than the needle & the thread was stretched too tight. I tried to slow down the fabric movement, but I found it was better to increase the needle speed. I sew much better fast than slow.

Don't be afraid to put your foot down! It takes time to get an even stitch length (unless you have a stitch regulator) but the more you practice, the better you'll get.

Also, I avoid free motion quilting on batiks. Their heavier thread count often causes breakage.
It could be that I was moving quilt too fast. I was scared to sew too fast. Thanks
rburnitt is offline  
Old 04-14-2011, 10:26 AM
  #7  
Super Member
 
BKrenning's Avatar
 
Join Date: Mar 2010
Location: Lake Wales, FL, USA
Posts: 1,554
Default

Loosen the top tension, put some sewer's aid on the spool and use a new, bigger needle. Some people swear by the larger eye needles or topstitch needles.
BKrenning is offline  
Old 04-14-2011, 11:41 AM
  #8  
Super Member
 
Doreen's Avatar
 
Join Date: Jul 2007
Location: El Paso Tx
Posts: 1,428
Default

Check the needle. Use a top stitch. What weigth thread are you using? Adjust your tension. Is your thread on a thread stand? How old is the thread?
Doreen is offline  
Old 04-14-2011, 01:25 PM
  #9  
Super Member
 
Join Date: Jan 2009
Location: NE Wisconsin
Posts: 1,351
Default

I had that problem when I was using Coats and Clark thread on the spools with the notch cut to hold the end of the thread when it wasn't being used. Due to the way the spool needs to unwind on my machine, the thread would get caught in the slot whenever it got near that end of the spool. I finally put a tiny piece of painter's tape over the slot. End of problem! I've recently switched to thread from Connecting Threads that comes with no plastic ends to the spools. Love it!

Sue
Pinkiris is offline  
Old 04-14-2011, 02:13 PM
  #10  
Junior Member
Thread Starter
 
Join Date: Mar 2011
Location: Kinder, La
Posts: 116
Default

Originally Posted by Doreen
Check the needle. Use a top stitch. What weigth thread are you using? Adjust your tension. Is your thread on a thread stand? How old is the thread?
.
new thread and 50wt. needle was for quilting
rburnitt is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mjpEncinitas
For Vintage & Antique Machine Enthusiasts
6
12-12-2019 05:19 PM
PghPat
Main
5
12-30-2015 06:37 AM
cricket_iscute
Main
12
12-31-2014 07:29 PM
oksewglad
Main
17
01-23-2012 09:15 PM
beetle
Main
12
12-13-2008 11:08 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter