beginner's quilting class
07-31-2009, 11:59 AM
#1
Power Poster
Thread Starter
Join Date: May 2008
Location: MN
Posts: 24,387
There was a long discussion recently about what an instructor should (and should not) do when teaching a class.
Looking back, what were the most useful things you learned when you took your first hand-piecing class?
Or, what do you wish you would have known "then," that you've since learned?
Useful things I learned:
How to make/tie a consistent knot.
If you were a beginner, would these things be useful/informative to you?
Fabric - fiber content, grain lines
Needles - differences - any brand preferences
Thread
How much "technical" information is enough and when does it get to be too much?
I have found I'm not a very good gauge of some things, because I've been told that my mind processes things "funny/different"
Looking back, what were the most useful things you learned when you took your first hand-piecing class?
Or, what do you wish you would have known "then," that you've since learned?
Useful things I learned:
How to make/tie a consistent knot.
If you were a beginner, would these things be useful/informative to you?
Fabric - fiber content, grain lines
Needles - differences - any brand preferences
Thread
How much "technical" information is enough and when does it get to be too much?
I have found I'm not a very good gauge of some things, because I've been told that my mind processes things "funny/different"
07-31-2009, 01:21 PM
#2
Power Poster
Join Date: Jan 2008
Location: Florida
Posts: 17,636
well, Big, I don't think I'm one to answer, the when is enough, enough, thing, lol...but the stuff you mentioned, in my opinion, just what a newbie needs, especially that knot tieing stuff.
Well, the other stuff is just as important, but seems more readily available info. Great for a class.
How to get things "squared", accurate 1/4" seams on machine,...all the info on how to get accuracy is what newbie's need.
How to keep rulers from slipping. It took me a while to get up the courage to cut my fabrics with rotary, bc I was afraid I would ruin it, with slippage. I put sandpaper on my rulers. I had bought this clear stuff, and it didn't do it, for me.
Well, the other stuff is just as important, but seems more readily available info. Great for a class.
How to get things "squared", accurate 1/4" seams on machine,...all the info on how to get accuracy is what newbie's need.
How to keep rulers from slipping. It took me a while to get up the courage to cut my fabrics with rotary, bc I was afraid I would ruin it, with slippage. I put sandpaper on my rulers. I had bought this clear stuff, and it didn't do it, for me.
07-31-2009, 05:02 PM
#3
Super Member
Join Date: Feb 2008
Location: North Carolina
Posts: 1,925
I think you can "recommend" certain needles, thread etc. but it will eventually be a personal choice based on many criteria.
I'd love to know about 1/4 foots on machines--used to draw the line in pencil. Grain of fabric--HUGE to know about, especially when it stretches.
I would have also liked to have had a bit of a discussion about lights, darks, and medium color fabrics. I'm a fan of darks and to actually buy light and medium colors KILLS me, but sometimes in order to get the look you need to understand color value. I still stuggle with this.
HTH,
I'd love to know about 1/4 foots on machines--used to draw the line in pencil. Grain of fabric--HUGE to know about, especially when it stretches.
I would have also liked to have had a bit of a discussion about lights, darks, and medium color fabrics. I'm a fan of darks and to actually buy light and medium colors KILLS me, but sometimes in order to get the look you need to understand color value. I still stuggle with this.
HTH,
07-31-2009, 05:21 PM
#5
Super Member
Join Date: Jun 2009
Location: East Coast
Posts: 2,221
As a beginner who finished a beginning quilting class only a few weeks ago, I don't know enough yet to say what the class missed.
You asked specifically about a beginning hand-piecing class, and I really wish mine had been a hand-piecing class, but it was all machine piecing and quilting, except that the binding was done by hand. I wish I'd been able to find a longer, more comprehensive class that covered the hand techniques and offered comparisons between hand and machine.
OTOH, for what it was, a 5-session machine-based class where we made a table runner, it was quite good. We learned about color combining, color value, etc. We learned about tying knots, rotary cutting, getting our piece corners to meet at the same place, differences in fabrics and battings, etc.
There were no triangles in our table runners. That's one thing I wish could have been added that isn't as extensive as adding hand techniques.
You asked specifically about a beginning hand-piecing class, and I really wish mine had been a hand-piecing class, but it was all machine piecing and quilting, except that the binding was done by hand. I wish I'd been able to find a longer, more comprehensive class that covered the hand techniques and offered comparisons between hand and machine.
OTOH, for what it was, a 5-session machine-based class where we made a table runner, it was quite good. We learned about color combining, color value, etc. We learned about tying knots, rotary cutting, getting our piece corners to meet at the same place, differences in fabrics and battings, etc.
There were no triangles in our table runners. That's one thing I wish could have been added that isn't as extensive as adding hand techniques.
07-31-2009, 06:43 PM
#7
Power Poster
Join Date: Jan 2009
Location: Reno, Nv
Posts: 16,515
I think if you are in doubt, read a book table of contents/format on the subject. That will give you a good order to base your lesson on. I have taught individuals to quilt (not a class). It helps you to remember the things that newbies need to learn. I am thinking that it is a beginning class, and the information sheet should include pictures of the hard to remember, small but important things. Hand piecing does use different thread and often templets are marked, which is what you use to make sure your stitches are lined up right.
I think if you make up your project first, that it will be a good help to you and your students. I like to see a large scale diagram on a storyboard. It helps me a lot.
I think if you make up your project first, that it will be a good help to you and your students. I like to see a large scale diagram on a storyboard. It helps me a lot.
08-01-2009, 04:28 AM
#8
Junior Member
Join Date: Jul 2009
Posts: 128
If I were taking a beginner hand piecing class I would like to learn the things that will make my first projects successful and fun. I think too much technical info at this point would be a turn off for me. The things I would find most useful are:
How to make/tie a knot.
Fabric - More about grain line than fiber content.
A short discussion about Color/Value (lights,mediums,darks)
How to cut accurately.
How to sew intersections so that I won't end up with gaping holes.
How to choose suitable beginner patterns.
I would find reference sheets and diagrams very helpful also.
Good luck with the class.
How to make/tie a knot.
Fabric - More about grain line than fiber content.
A short discussion about Color/Value (lights,mediums,darks)
How to cut accurately.
How to sew intersections so that I won't end up with gaping holes.
How to choose suitable beginner patterns.
I would find reference sheets and diagrams very helpful also.
Good luck with the class.
08-01-2009, 04:42 AM
#9
Senior Member
Join Date: Jul 2009
Location: Minnesota
Posts: 688
I wishmore beginner classes were longer and would actually cover quilting! Both beginner classes I attended only covered piecing and never got to actual quilting. It would have been nice to complete thewhole project.
Oh and I guess that by not getting to quilting, I've been winging it on the binding piece too! So far nothing has fallen apart! :-)
Oh and I guess that by not getting to quilting, I've been winging it on the binding piece too! So far nothing has fallen apart! :-)
08-01-2009, 05:29 AM
#10
Super Member
Join Date: Mar 2009
Location: Maryville, Tn
Posts: 1,786
I've taught a lot of beginners to hand piece.
Most of them have not been in a formal class, but 1 on 1 so, I find out if they have ever sewn at all before, if not I cover fabric basics, Equipment basics, etc. I never really did a lot with color, because I'm a bit of a "color rebel" and encouraged them to buy something they like for a first project. Tons of info on color and that can get pretty in depth for a beginner. I never teach knot tying, as I don't use knots in hand piecing. ever done any hand quilting and hit a knot? it's a booger.. I teach backstitching. I do teach beginning piecers to mark all of their seams and cut with scissors. To me those are the basics, and usually it's a smaller project in a basic class. And after marking seams and "seeing" a quarter of an inch enough, it helps train their eye. also makes the beginning project more accurate and satisfying.
Most of them have not been in a formal class, but 1 on 1 so, I find out if they have ever sewn at all before, if not I cover fabric basics, Equipment basics, etc. I never really did a lot with color, because I'm a bit of a "color rebel" and encouraged them to buy something they like for a first project. Tons of info on color and that can get pretty in depth for a beginner. I never teach knot tying, as I don't use knots in hand piecing. ever done any hand quilting and hit a knot? it's a booger.. I teach backstitching. I do teach beginning piecers to mark all of their seams and cut with scissors. To me those are the basics, and usually it's a smaller project in a basic class. And after marking seams and "seeing" a quarter of an inch enough, it helps train their eye. also makes the beginning project more accurate and satisfying.
Thread
Thread Starter
Forum
Replies
Last Post
