Go Back  Quiltingboard Forums > Main
Best Press, Starch, Etc., please share your knowledge one more time >

Best Press, Starch, Etc., please share your knowledge one more time

Best Press, Starch, Etc., please share your knowledge one more time

Old 04-19-2012, 01:59 PM
  #1  
Super Member
Thread Starter
 
Join Date: Sep 2011
Location: So Plymouth, NY
Posts: 2,502
Default Best Press, Starch, Etc., please share your knowledge one more time

Hi All: I've been reading some of the entries about starching and the likes. Have quilted for 30+ years and until I joined the QB, never knew that it was used as far as quilting goes. For that matter, I'm still not sure if I 'm understanding the concept for sure. I bought a bottle of the Bounce Ironing Spray this afternoon. Do you:

1) Spray down and iron the fabric to stabilize before you rotary cut it for better precision in cutting?
2) Use it on completed blocks if they are wonky, trying to force them to behave?
3) Use it just to add in pressing for a flatter quilt top?

Thanks for your patience and input.
SouthPStitches is offline  
Old 04-19-2012, 02:32 PM
  #2  
Power Poster
 
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
Default

I pre-wash. If i'm going to use the fabric right away, I take it out of the washer and dunk it into a50-50 mixture of StaFlo and water, then dry and iron. If the fabric is going into my stash, I just dry it and fold it. When I'm ready to use it, I really spray it (not running, slightly damp) with Niagra non-aerosol (sp?), then iron it dry.
So I do #1, starch before you cut
I have also used it to coax blocks into square, but usually if I've starched first, I have pretty good luck with them being square when I'm done.
I made 1 really complex block with small pieces. For this block I saturated the fabric before I cut with spray starch. It was almost cardboard-like I think it helped.
PaperPrincess is offline  
Old 04-19-2012, 02:40 PM
  #3  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,444
Default

I like to rough cut my yardage and starch and iron my sections. I then rotary cut my quilt pieces and I double starch if my pieces will have bias edges. I also starch and press my top and back before machine quilting. I wash completed quilts to remove the starch when finished. I make my own starch mixture from cornstarch but I also have picked up the Bounce ironing spray and I will try that next.
Tartan is offline  
Old 04-19-2012, 02:41 PM
  #4  
Power Poster
 
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
Default

starch often will help (stiffen) pre-washed fabrics so they are easier to cut precisely- if the fabric has not been pre=washed a spritz of water usually does the trick-since the sizing has not been washed out.
i've been using plain ole Niagra spray starch for 47 years---my mom & grandmother both used it-
i starch fabrics when they need a little more than what water can do- or if i want the fabric to be stiff for some reason- also it really helps when cutting flannels for good cuts. i do not use it to try to (force) blocks- seems like when the quilt was washed the blocks would be back to being (wonky/wrong)
i do not use the 'best-press' or other (designer) starches/sprays---i don't like the smell of them- i pre-wash to get rid of any stink in my fabrics- i don't want to then add a new stink - with plain old niagra there is no lingering odor on my fabric.
ckcowl is offline  
Old 04-19-2012, 03:45 PM
  #5  
Power Poster
 
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,680
Default

Originally Posted by ckcowl View Post
stai do not use the 'best-press' or other (designer) starches/sprays---i don't like the smell of them- i pre-wash to get rid of any stink in my fabrics- i don't want to then add a new stink - with plain old niagra there is no lingering odor on my fabric.

As an FYI, for those interested, Best Press does come in an unscented.
QuiltE is offline  
Old 04-19-2012, 03:49 PM
  #6  
Super Member
 
Join Date: Jan 2012
Location: Holmen, WI
Posts: 6,459
Default

If I've pre-washed my fabric, I use sizing (I prefer it to actual starch) as I press the big pieces (if I have pre-cuts, I don't pre-wash them so they don't need starched). I also starch a little on the finished block. I usually always wash my quilts before I give them away or use them for the 1st time so the sizing washes out then & the quilt isn't stiff.
burchquilts is offline  
Old 04-19-2012, 04:05 PM
  #7  
Super Member
 
Join Date: Apr 2007
Location: Alturas, CA
Posts: 9,393
Default

I'm not familiar with Bounce Ironing Spray, so I can't comment on it, but I will tell you what I do. I don't pre-wash, ANY fabric I'm going to be cutting, I spray a minimum of at least 2 hours before I'm going to be working with the fabric, I use Sta-Flo starch, diluted 50/50, after the minimum time I allow for the starch to soak into the fibers of the fabrics, then I'll either air dry or put in the drier for a few minutes, when dry then I'll iron. If you spray the fabric, then iron, you're really only ironing the STARCH and not the fabric, which is why your iron will usually get all yucky brown with starch, you will not usually have that problem if the starch has soaked into the fabric, then when you iron, you are truly ironing the FABRIC and not the starch. This is my personal opinion and I'm sure that others will have their own opinion, so what I suggest is to try different tips/hints, and see what works best for YOU.
pocoellie is offline  
Old 04-19-2012, 04:57 PM
  #8  
Super Member
 
Join Date: Apr 2010
Location: Illinois
Posts: 9,312
Default

I too am a Stay Flo addict. I love that I can custom mix the strenght, depending the project. Love the crispness and the accuracy it brings to the cutting. Before I discovered Stay Flo I use spray... it got to be more money than I needed to spend on starch.
I let it soak in completely and if I have time let it dry completly for the best results.
When working with scraps I will mix a batch put them (scraps) into a big tupperware bowl , hang on a drying rack iron then cut.
It also makes paper piecing go easier , as the fabrics don't flip back.
Lori S is offline  
Old 04-19-2012, 04:58 PM
  #9  
Super Member
 
Join Date: Feb 2010
Location: Maryland
Posts: 3,586
Default

I only starch before I cut my fabric and will heavily starch that. I don't spray individual blocks anymore because once my fabric is wet again it tends to come out wonky when I press--probably operator error but still something to watch out for.
virtualbernie is offline  
Old 04-19-2012, 05:37 PM
  #10  
Super Member
 
hopetoquilt's Avatar
 
Join Date: Aug 2010
Location: New Jersey
Posts: 2,860
Default

Originally Posted by Lori S View Post
I too am a Stay Flo addict. I love that I can custom mix the strenght, depending the project. Love the crispness and the accuracy it brings to the cutting. Before I discovered Stay Flo I use spray... it got to be more money than I needed to spend on starch.
I let it soak in completely and if I have time let it dry completly for the best results.
When working with scraps I will mix a batch put them (scraps) into a big tupperware bowl , hang on a drying rack iron then cut.
It also makes paper piecing go easier , as the fabrics don't flip back.
Ahh-ha... so that's how you handle PPing fabrics with ease. I am doing the 50 stars Block of the week and I believe next week will go quite a bit more smoothly.
hopetoquilt is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Denise S
Main
15
08-04-2012 02:22 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter