Go Back  Quiltingboard Forums > Main
Binding Woes >

Binding Woes

Binding Woes

Old 02-04-2013, 01:52 PM
  #1  
Junior Member
Thread Starter
 
yweinst's Avatar
 
Join Date: Oct 2012
Location: Colorado
Posts: 246
Default Binding Woes

So I have been sewing now since August and during that time I have made 5 quilts. Each one I feel that I am getting better and better but I am finding binding really difficult. I don't know what I'm doing wrong.

I have watched the Sharon Schamber method of using glue this time and it seems to have helped but I'm still having issues.

I found making my strips 2 and 1/4 inch doing a single fold and than using a 3/8 seam allowance is making the turning under of the binding very difficult. It seems it takes everything I have to turn it under and than the whole thing didn't seem the same width around the entire border.


On top of all of that I have found that the stitch in the ditch technique (yes I know by hand would be better but I have a bad wrist so it isn't an option) is not coming out even all around.

I'm sure this is one of those practice makes perfect situations but is there anything I can do to help my binding along.

I just feel I might be missing something.

Thanks,
Yael
yweinst is offline  
Old 02-04-2013, 02:06 PM
  #2  
Power Poster
 
dunster's Avatar
 
Join Date: Mar 2009
Location: Lake Elsinore, CA
Posts: 15,133
Default

If you cut your strip at 2 1/4 ", fold and place it even with the edge of the fabric, and sew a 3/8" seam allowance, the fold will just meet the seam after you fold it over the edge of the quilt sandwich. You aren't allowing anything for the thickness of the quilt (batting and two layers of fabric) or for the fold to cover the seam. You could make the seam allowance a little smaller, or cut the strip a little wider, and it will be easier to turn.
dunster is offline  
Old 02-04-2013, 02:08 PM
  #3  
Senior Member
 
Join Date: Jan 2010
Location: Delaware County, SW of Phila.
Posts: 610
Default

Sorry to hear you are having so much trouble with the binding. I use a 2 and 1/2 inch piece when I am binding. It gives a little more fabric to work with and that helps me out especially if the quilt/batting is thick. Also, when doing the binding by machine, I use a zig zag stitch to finish. It hides a lot of mistakes and if it is a little uneven it does not show as much. Don't agonize over it too much. My philosophy is: If a man on a galloping horse can't see it, it is good enough. Enjoy what you are doing. Have fun. It does not have to be perfect. But, definitely try a wider strip for the binding. Good luck.
dcamarote is offline  
Old 02-04-2013, 02:09 PM
  #4  
MTS
Banned
 
Join Date: Nov 2010
Posts: 4,134
Default

First thoughts - is your quilted top trimmed straight, and are the corners trimmed to perfect 90 angles?
Not being the quilt police, but it's hard to get nice straight bindings if this isn't the case.

Try cutting your binding strips 2.5" - if you need an extra little amount of fabric, then give it to yourself.
Or 2-3/8".

Practice on a small quilt sandwich so you can find the correct combination of strip width and seam allowance that works for YOU, and will allow you to comfortably machine sew down the second side as well.

I cut 2" and sew with a 1/4" seam, and that works for me.
My QBFF cuts 2-1/4 because she's happier with the way that looks.
Some people adore Sharon's method and get great results (I'm one of them), and others have found better results with NOT pressing the binding strips in half before sewing to the sandwich.

To each his/her own. ;-)

Last edited by MTS; 02-04-2013 at 02:13 PM.
MTS is offline  
Old 02-04-2013, 02:18 PM
  #5  
Super Member
 
Join Date: Aug 2011
Location: Texas
Posts: 3,667
Default

Great advice from the others...I especially love dcamarote and her "man on a galloping horse" analogy.....Though I must be honest and say I have been known to take things out that no one would consider re-doing..my dh has joked with me that he thinks I like taking things out more than making them!
I always cut my binding strip a tad larger, I can always cut more off, can't add it back. I also leave my backing fabric a little larger when I use it as the binding...
Kif
kiffie2413 is offline  
Old 02-04-2013, 02:31 PM
  #6  
Super Member
 
CarolinePaj's Avatar
 
Join Date: Mar 2010
Location: Suffolk, UK
Posts: 3,517
Default

Go to Sharon Schambers site and view her video binding the angel.... she is an amazing teacher.

Hugs

Caroline
CarolinePaj is offline  
Old 02-04-2013, 02:32 PM
  #7  
Senior Member
 
Join Date: Dec 2012
Location: Arkansas
Posts: 559
Default

Sometimes, I press the edge of the quilt sandwich just before I sew the binding on. Also, if I'm having a problem I zigzag the very outside edge before attaching the binding. I don't have any luck turning and then machine stitching. I don't really mind the hand stitching. Just don't like to sew the binding onto the sandwuch. It sure would be faster to machine stittch it. Hope your hand gets better.
adamae is offline  
Old 02-04-2013, 02:39 PM
  #8  
Super Member
 
Join Date: May 2011
Location: Southeast Wisconsin
Posts: 1,070
Default

Don't feel bad - I have made tons of quilts and finally on the last one I did I feel happy with my binding (I do hand sew to the back - just wait for days my hands will cooperate!). I followed Sharon's method religiously and it worked!

I echo everyone else - give yourself more fabric - either sew a 1/4" seam or cut bindings wider. I still have a project that I cannot turn the bindings on - one day will take it out and do it right.
sewmary is offline  
Old 02-04-2013, 02:46 PM
  #9  
Super Member
 
Belfrybat's Avatar
 
Join Date: Oct 2012
Location: West Central Texas
Posts: 2,586
Default

Are you bringing the binding over to the front or back? The quilt shop here sews theirs on the back and brings it to the front to sew on. Comes out perfect every time. Mine doesn't yet, but I'm improving. I can't imagine sewing the traditional method where the binding goes to the back (unless hand sewing). I think my stitches would be all over the place. I truly hate binding, and when possible, just make the back larger and fold it to the front. But understand that isn't considered acceptable by the quilting police.
Belfrybat is offline  
Old 02-04-2013, 02:51 PM
  #10  
Junior Member
Thread Starter
 
yweinst's Avatar
 
Join Date: Oct 2012
Location: Colorado
Posts: 246
Default

So I watched the Susan Schamber's method three times before binding this one which is why I used the 2 1/4" strip. I square the quilt and it looked great and then came the binding debacle.

I'm going to used more fabric and practice on a small quilt sandwich to perfect the binding.

Thank you for all the fantastic advice!!!

Yael
yweinst is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
0
11-03-2011 01:23 PM
hlponyfarm
Main
65
06-24-2011 11:10 AM
patricej
Main
42
09-17-2007 07:14 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter