Go Back  Quiltingboard Forums >
  • Main
  • Question about machine quilting >
  • Question about machine quilting

  • Question about machine quilting

    Thread Tools
     
    Old 10-03-2008, 05:48 AM
      #1  
    Senior Member
    Thread Starter
     
    PrettyKitty's Avatar
     
    Join Date: Jul 2008
    Location: Dudley, UK
    Posts: 909
    Default

    Ok, so when my Mom taught me to use a sewing machine She taught me to 'anchor' the stitches at the start and end by doing a few backward stitches when you start and finish any line (back -tacking?)

    When I did a baby quilt and echo quilted inside each of the patchwork squares, I did this, because I knew there wouldn't be any overlapping seams to anchor the start and end of the stitching. Is this the correct way to secure the start and end of your stitching when you are starting to sew in the middle of a quilt? Is it really necessary as I didn't like the way the overlapped stitching showed as a bit thicker than the rest of the line?

    I hope I have explained my query ok, as always your help would be appreciated
    PrettyKitty is offline  
    Old 10-03-2008, 05:51 AM
      #2  
    Banned
     
    Join Date: Apr 2008
    Location: SW AL
    Posts: 334
    Default

    well, it takes a lot longer but if you start in the middle somewhere it's a good idea to bring the bobbin thread up and then tie the two threads... or bring it up, hold both and take a few stitches IN PLACE - don't move back and forth

    if you really (yea right) want to get gung ho you could use a needle to bury those two threads...
    Janeen is offline  
    Old 10-03-2008, 05:53 AM
      #3  
    Senior Member
     
    QuiltingTurtle's Avatar
     
    Join Date: Mar 2008
    Location: Rhode Island
    Posts: 684
    Default

    I do not back stitch while doing the actual quilting. I am not sure about others though.

    QuiltingTurtle is offline  
    Old 10-03-2008, 06:19 AM
      #4  
    Super Member
     
    mary quite contrary's Avatar
     
    Join Date: Aug 2008
    Location: Georgia
    Posts: 2,524
    Default

    You need to anchor the stitches somehow. I didn't do this on my first quilt and the stitches are pulling out and it hasn't been a well used quilt either. A couple stitches right in place is usually the best/easiest.
    mary quite contrary is offline  
    Old 10-03-2008, 06:47 AM
      #5  
    Junior Member
     
    Join Date: Aug 2008
    Posts: 175
    Default

    :(
    sspingler is offline  
    Old 10-03-2008, 11:55 AM
      #6  
    Junior Member
     
    nancee's Avatar
     
    Join Date: Sep 2008
    Location: CA
    Posts: 107
    Default

    As a new quilter all of your answers were very helpful to me too....Thanks. I am in the midst of taking out (with a seam ripper) quilting, because I did just that...stitched back and forth to secure....didn't like the look at all....On top of that I used a darker thread...So, I have got to fix it...
    nancee is offline  
    Old 10-03-2008, 12:01 PM
      #7  
    Izy
    Super Member
     
    Izy's Avatar
     
    Join Date: Nov 2007
    Location: Halifax, W. Yorks, U.K.
    Posts: 5,996
    Default

    I have the locking stitch built in but I don't like it as it produces a knot on the back...what I discovered is if you use it at the end of a line of stitching BUT only let it do three locking stitches - when you start your next line of stitching it will do the remaining three at the beginning, so apart from your initial starting point your quilting is secure and as a extra precaution I DO thread all the ends into a needle and bury them for as long as I can reach with a needle, a pain but you get a much neater finish. I do bring up the bobbin thread to start as otherwise you can get a 'birds nest' underneath, messy and hard work to correct afterwards :D
    Izy is offline  
    Old 10-03-2008, 12:42 PM
      #8  
    Junior Member
     
    nancee's Avatar
     
    Join Date: Sep 2008
    Location: CA
    Posts: 107
    Default

    Originally Posted by Izy
    I have the locking stitch built in but I don't like it as it produces a knot on the back...what I discovered is if you use it at the end of a line of stitching BUT only let it do three locking stitches - when you start your next line of stitching it will do the remaining three at the beginning, so apart from your initial starting point your quilting is secure and as a extra precaution I DO thread all the ends into a needle and bury them for as long as I can reach with a needle, a pain but you get a much neater finish. I do bring up the bobbin thread to start as otherwise you can get a 'birds nest' underneath, messy and hard work to correct afterwards :D
    This is very helpful to me...Thanks
    nancee is offline  
    Old 10-03-2008, 01:38 PM
      #9  
    Izy
    Super Member
     
    Izy's Avatar
     
    Join Date: Nov 2007
    Location: Halifax, W. Yorks, U.K.
    Posts: 5,996
    Default

    I hope I explained it well enough Nancee...if not just shout and I will go through it again more clearly :wink: :lol:
    Izy is offline  
    Old 10-03-2008, 05:13 PM
      #10  
    Junior Member
     
    nancee's Avatar
     
    Join Date: Sep 2008
    Location: CA
    Posts: 107
    Default

    It makes perfect since...Thanks. See, I am already learning stuff here.
    nancee is offline  


    FREE Quilting Newsletter