Go Back  Quiltingboard Forums > Main
Bobbins, bobbins, bobbins >

Bobbins, bobbins, bobbins

Bobbins, bobbins, bobbins

Old 08-18-2012, 03:35 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Sep 2011
Location: Western NY
Posts: 841
Default Bobbins, bobbins, bobbins

Over the course of 60 years I have had a few different sewing machines. Only my singer had the metal bobbin, the rest have been plastic-and I have kept them all. Is there a way to tell the difference in bobbins,of course, besides the width? My Brothers seems to want only Brothers bobbins. So far I have been successful in keeping them apart from the rest but besides marking them, is there a way to tell which ones they are?
MarLeClair is offline  
Old 08-18-2012, 03:47 PM
  #2  
Senior Member
 
Patti25314's Avatar
 
Join Date: Jul 2012
Location: threading a needle or pulling a weed
Posts: 483
Default

If you post photos, I'll help you figure them out. Do you have some small baggies or some way to keep them sorted?
Patti25314 is offline  
Old 08-18-2012, 04:13 PM
  #3  
Super Member
 
Join Date: Feb 2010
Location: Maryland
Posts: 3,586
Default

I keep mine in small baggies too. I further sort them into which thread is wound on them. It also helps to put a small dot of fingernail polish on the top of the bobbin and the thread spool just in case I forget to put them back in the baggies.
virtualbernie is offline  
Old 08-18-2012, 04:21 PM
  #4  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,444
Default

I used the tip for buying the clear plastic 1/2 inch diameter hose for my bobbins. You cut a 1/4 section off the hose and cut a slit down one side to open it. You then push the little ring onto the bobbin to keep the thread contained. It also works great for identifying the thread that's on the bobbin. I write with a sharpie on the tube piece what the name of the thread is but you could write which machine the bobbin belongs to also.
Tartan is offline  
Old 08-18-2012, 05:14 PM
  #5  
Super Member
 
Join Date: Feb 2010
Location: Maryland
Posts: 3,586
Default

Originally Posted by Tartan View Post
I used the tip for buying the clear plastic 1/2 inch diameter hose for my bobbins. You cut a 1/4 section off the hose and cut a slit down one side to open it. You then push the little ring onto the bobbin to keep the thread contained. It also works great for identifying the thread that's on the bobbin. I write with a sharpie on the tube piece what the name of the thread is but you could write which machine the bobbin belongs to also.
I love that idea! Thanks for the tip!
virtualbernie is offline  
Old 08-18-2012, 05:17 PM
  #6  
Super Member
 
Join Date: Jan 2012
Posts: 4,783
Default

I have used an ultra thin permanent Sharpie marker right on the flat side of some bobbins to identify what machine they go to. I agree, this is a problem with the plastic bobbins, which are sometimes so close in size, yet not interchangable. Wouldn't it be nice if manufacturers just all used a standardized size, like most were years ago? Either that, or have the machine name right on the bobbin? We just have all the answers, but nobody asks us...
JustAbitCrazy is offline  
Old 08-18-2012, 05:21 PM
  #7  
Senior Member
 
Join Date: Aug 2010
Location: Massachusetts
Posts: 500
Default

I use the plastic bobbin cases. I have one for each machine and mark on the case the model of the machine.
quilter711 is offline  
Old 08-18-2012, 06:35 PM
  #8  
Super Member
 
Join Date: Sep 2009
Location: Massachusetts, USA
Posts: 1,775
Default

This has been something that I've been thinking about, lately, too. I have a "collection" of vintage machines and they all seem to have their own type of bobbin and it's been getting confusing. I've seen some good suggestions so far!
cabbagepatchkid is offline  
Old 08-18-2012, 07:28 PM
  #9  
Power Poster
 
Jingle's Avatar
 
Join Date: Dec 2009
Location: Outside St. Louis
Posts: 38,181
Default

I have plastic bobbin boxes, 1 has bobbins for my Singer 328K, the other has ones for my White Jeans Machine and they also work in my 1950s Vandervoort. they have a bunch of holes made into them, a badged 15 Clone. The bobbins for my straight stitch only Juki TL 98QE and Babylock Jane are interchangeable and Kept on the shelf above my machine, in a bobbin box if they have thread and extras in plastic they came in. All of these are metal. My White Quilters Star has plastic bobbins, and only the three that came with it is all that works in it. I need to mark them as to what machine they go to.
Jingle is offline  
Old 08-19-2012, 05:30 AM
  #10  
Junior Member
 
QuiltingMia's Avatar
 
Join Date: Oct 2010
Location: New Orleans, Louisiana
Posts: 128
Default

I have a brother machine and an elna. The bobbins seem to be the same. Could they be a tad different and I can't see it? Will it give me problems in the future because they seem to work ok in both?
QuiltingMia is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
diogirl
Main
57
09-12-2009 09:29 AM
quiltingbee12
Main
12
06-21-2009 07:50 PM
Ducky
Main
24
05-20-2009 10:25 AM
sondray
Links and Resources
0
03-28-2009 11:20 AM
Mary Stire
Main
5
08-30-2007 10:20 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter