Go Back  Quiltingboard Forums > Main
Complaint About Me >

Complaint About Me

Complaint About Me

Thread Tools
 
Old 10-19-2010, 06:14 AM
  #1  
Senior Member
Thread Starter
 
Join Date: Apr 2009
Location: Bushkill, Pa
Posts: 534
Default

Why is it when I have everything lined up, a foot that has markings on it that I follow rather than the needle I still can't sew in a straight line? What is wrong with me? It's extremely annoying.
winia is offline  
Old 10-19-2010, 06:15 AM
  #2  
Power Poster
 
Join Date: Sep 2007
Posts: 18,726
Default

Have you tried uncrossing your eyes???? (just kidding...)

I have the same trouble, so don't feel like you are alone. It does seem to help when I slow down though.
sandpat is offline  
Old 10-19-2010, 06:16 AM
  #3  
Super Member
 
Join Date: Mar 2010
Location: North Texas
Posts: 8,710
Default

JOin the party. Maybe better glasses? If you find the mark you want to sew on, I will put some blue painters tape down so it is straight, then another on top of it and maybe a third. It makes it thicker so you can pratically line the fabric up with the tape and feel the border. Might help you too.
debbieumphress is offline  
Old 10-19-2010, 06:16 AM
  #4  
Banned
 
Join Date: Mar 2010
Location: Sturbridge, Ma
Posts: 3,992
Default

put some painters tape down the front of the foot onto the arm of the machine and table (if necessry) to help you guide. This helps keep it straight going under the foot.
Holice is offline  
Old 10-19-2010, 06:40 AM
  #5  
Super Member
 
Join Date: Mar 2010
Location: Anchorage, AK
Posts: 1,392
Default

staring at the needle or even at a foot close to the needle tends to result in crooked lines.....try marking the base of the machine a couple of inches ahead of your needle and use that as your guide for the edge of your fabric and see if it helps...If us use that as your primary check, you can spot check periodically to see that the edge of the fabric hear the needle is where you want it to be.

Think of driving down the road and focusing on a spot just ahead of your hood...you end up (usually) over compensating and the car moves back and forth a lot, even tho it may be small moves. If you focus on the road several yards ahead of the car, your turns are less jerky, the ride is smoother, and the path of the car is a straighter line.
ktbb is offline  
Old 10-19-2010, 07:09 AM
  #6  
Super Member
 
sewTinker's Avatar
 
Join Date: Sep 2010
Location: currently living outside of nashville, tn
Posts: 1,134
Default

Originally Posted by ktbb
staring at the needle or even at a foot close to the needle tends to result in crooked lines.....try marking the base of the machine a couple of inches ahead of your needle and use that as your guide for the edge of your fabric and see if it helps...If us use that as your primary check, you can spot check periodically to see that the edge of the fabric hear the needle is where you want it to be.

Think of driving down the road and focusing on a spot just ahead of your hood...you end up (usually) over compensating and the car moves back and forth a lot, even tho it may be small moves. If you focus on the road several yards ahead of the car, your turns are less jerky, the ride is smoother, and the path of the car is a straighter line.
I love this advice! From now on, I'll be driving my Machine down painter's tape alley. Thank you for the vivid imagery.
sewTinker is offline  
Old 10-19-2010, 07:15 AM
  #7  
Power Poster
 
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
Default

one way that helped me start sewing straighter was to take a moment and draw the seam lines on my fabric with a pencil, it only takes a moment and makes a huge difference. i don't have to anymore, somehow just doing it for a couple projects helped me get the hang of keeping everything straight. i still always draw the lines for hand piecing but sew nice and straight with the machine now.
ckcowl is offline  
Old 10-19-2010, 08:35 AM
  #8  
Super Member
 
Ripped on Scotch's Avatar
 
Join Date: Apr 2010
Location: Ontario Canada
Posts: 1,328
Default

I have found that if I line myself up with the center of the needle and not the center of the machine I sew a much straighter line.
Ripped on Scotch is offline  
Old 10-19-2010, 09:03 AM
  #9  
Super Member
 
Join Date: Aug 2010
Location: Piedmont Virginia in the Foothills of the Blue Ridge Mtns.
Posts: 8,562
Default

Originally Posted by ktbb
staring at the needle or even at a foot close to the needle tends to result in crooked lines.....try marking the base of the machine a couple of inches ahead of your needle and use that as your guide for the edge of your fabric and see if it helps...If us use that as your primary check, you can spot check periodically to see that the edge of the fabric hear the needle is where you want it to be.

Think of driving down the road and focusing on a spot just ahead of your hood...you end up (usually) over compensating and the car moves back and forth a lot, even tho it may be small moves. If you focus on the road several yards ahead of the car, your turns are less jerky, the ride is smoother, and the path of the car is a straighter line.
I'd like to expand on this and suggest placing a FULL small Post-it note (glued edge of notes) smack up against the right side of your presser foot with the majority of it extending in front of the foot. Then the front edge of the Post-it note becomes your eyeball site, and the raised edge of the note becomes your guide to keep the fabric aligned.

Two issues, the sticky back on the Post-it Note does NOT adhere to most throat plates more than a minute -- I use a fat, thick rubber band around the free-arm portion of MY Bernina 1031 to hold it in place. Or a long piece of scotch tape. Both are easily repositioned for changing bobbins or sewing other seams.

Also, if your feed dogs extend outside the width of your presser foot, this technique becomes more difficult. Try learning to sew with a changed needle position to create your 1/4" seam allowance.

This little tip has saved me literally countless hours of pokey driving like a little old lady eyeballing right off the hood of her car! I now sew a perfectly straight seam with the pedal to the metal!

Jan in VA
Jan in VA is offline  
Old 10-19-2010, 09:13 AM
  #10  
Super Member
 
franie's Avatar
 
Join Date: Mar 2010
Location: SW Iowa
Posts: 6,550
Default

I "wave" sometimes too! I usually fix it. Watch out for leaning left or right at the end of a seam.
franie is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
schnurke
For Vintage & Antique Machine Enthusiasts
13
12-18-2012 08:26 AM
3Gquilter
Main
0
04-06-2010 12:54 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter