Go Back  Quiltingboard Forums > Main
dumb question! >

dumb question!

dumb question!

Old 05-18-2010, 05:39 AM
  #41  
Super Member
 
mountain deb's Avatar
 
Join Date: Jun 2008
Location: Petersburg, WV
Posts: 1,512
Default

I read on here somewhere, where someone used these damaged mats for templets. Just cut the shape you need.
mountain deb is offline  
Old 05-18-2010, 03:33 PM
  #42  
Senior Member
 
Overlander's Avatar
 
Join Date: Sep 2008
Location: Williams Lake, British Columbia
Posts: 485
Default

I did the same thing last summer. It wasn't a big warp but enough that one side was really out of whack. My DH helped me iron it with a HOT dry iron through a towel then set a very heavy board on top. We did this about 4 times and each time it was better and better. It still has a tiny warp, but is now useable again. Good luck, Barb
Overlander is offline  
Old 05-18-2010, 06:04 PM
  #43  
Super Member
 
GailG's Avatar
 
Join Date: May 2008
Location: Louisiana
Posts: 6,764
Default

Originally Posted by quiltinghere
I glued mine down to a piece of wood. Secure with clamps and weights (all over) until it dries.

Good luck
Now, there's a genius!

:wink: Great idea!!
GailG is offline  
Old 05-18-2010, 07:31 PM
  #44  
Super Member
 
GailG's Avatar
 
Join Date: May 2008
Location: Louisiana
Posts: 6,764
Default

Originally Posted by short-bread
I have two of my mats glued to a very thin piece of plywood and have been using them for two years and they work fine. In fact you have no problem with storage because you can stand them up or lay them down if you leave a little edge of the wood outside of the mat.
Welcome to the board Short-bread. I love your name.
GailG is offline  
Old 05-18-2010, 09:28 PM
  #45  
Banned
 
Join Date: Jan 2010
Location: Forest Grove,OR
Posts: 6,400
Default

I am so sorry, I wish I could help. God bless. Penny
zz-pd is offline  
Old 05-19-2010, 09:01 AM
  #46  
Senior Member
 
Join Date: Jul 2009
Location: Bangor North Wales
Posts: 353
Default

Originally Posted by tlp
ok here goes. i did a really dumb thing a while back and left a rotary cutting mat in my car and it is warped. i cannot bring myself to throw it away! is it possible to salvage it in any way or can it be put to another use?
I've done the same thing and everybody I asked said I'd ruined it. But I had to try, so I placed it on the floor in the spare room with the warped edges facing downwards - (so that a part of the mat was lifted up off the floor) then I literally emptied my book shelves and put as much weight as I could on it - we have alot of books! I left it for a month. This is not an exact science so whether I needed to leave it that long I don't know - I just didn't want to take off all the books only to have to put them back. I'm delighted to say its been fine since then.
quiltyjax is offline  
Old 05-19-2010, 10:29 AM
  #47  
Member
 
Join Date: Dec 2009
Location: Texas
Posts: 60
Default

I have left my iron on one and I never got it flat again. Is it totally gone? I cut mine down just to a smaller size and I use it.
glenda in texas
Glenda C. is offline  
Old 06-08-2010, 06:31 PM
  #48  
Member
 
Join Date: Apr 2010
Posts: 28
Default

I too, left mine in the car to long and it warped. I tried everything except putting it back in the car again and nothing worked for me. I called the company and was instructed to do something I have not seen on here so far. That was to take a flat cookie sheet and put it in the freezer and lay that on top of the mat with weights on it several times. Did you ever try to put something that large in a full freezer? That was a lot of work taking everything out, sliding the cookie sheet in, then replacing the food. After doing this several times it still didn't not go flat. I was so disgusted! I make blue jean quilts and cutting a long narrow piece to slip into a pant leg makes it very easy to cut using a rotary cutter. That goes so fast that it ALMOST made me happy that it warped. Then I bought a QuiltCut 2 and my problems were solved.
patches is offline  
Old 06-08-2010, 09:32 PM
  #49  
Super Member
 
GailG's Avatar
 
Join Date: May 2008
Location: Louisiana
Posts: 6,764
Default

What's a QuiltCut 2?
GailG is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AlvaStitcher
Main
23
04-25-2015 02:25 AM
JudeWill
Main
42
11-05-2013 06:18 AM
linhawk
Main
10
09-20-2013 01:17 PM
DogHouseMom
Main
10
12-27-2011 07:58 AM
quilter on the eastern edge
Main
111
01-30-2011 06:42 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter