audible alarm on Pfaff QE 4.0 update
#1
Junior Member
Thread Starter
Join Date: Jun 2010
Location: Arlington, TX
Posts: 231
audible alarm on Pfaff QE 4.0 update
I posted a few weeks back about the (in)audible low bobbin alarm on my new machine. It seems some other folks were having the same problem. I thought you might like an update. After e-mailing with a Pfaff representative and talking with my local dealer, the decision was that the volume control needs replacing which in turn requires replacing the entire board since it is hardwired in. They are in the process of getting the board now. I am disappointed to say the least that this happened; I had great confidence in Pfaff based on previous machines but now perhaps now so much, especially since other machines are having the same problem - not just bad luck with mine! Anyway, if your audible alarm is not so audible, I would push the dealer to fix it.
#3
Member
Join Date: Sep 2012
Location: Oregon Coast Range
Posts: 46
I posted a few weeks back about the (in)audible low bobbin alarm on my new machine. It seems some other folks were having the same problem. I thought you might like an update. After e-mailing with a Pfaff representative and talking with my local dealer, the decision was that the volume control needs replacing which in turn requires replacing the entire board since it is hardwired in. They are in the process of getting the board now. I am disappointed to say the least that this happened; I had great confidence in Pfaff based on previous machines but now perhaps now so much, especially since other machines are having the same problem - not just bad luck with mine! Anyway, if your audible alarm is not so audible, I would push the dealer to fix it.
#4
Nancy Zieman of Sewing with Nancy was a spokesperson for Pfaff for years. Some one who worked with Pfaff posted Nancy quit Pfaff when the quality of the machines went downhill after the company sold to another manufacturer.
#5
I don't believe I would blame the alarm problem entirely on Pfaff. The circuit boards are manufactured by an outside factory in China who has a contract with SVP to make the boards. If there is a problem with the board that, fortunately, has been identified, and Pfaff is stepping up to the plate to fix it go ahead and get your machine fixed. Sometimes companies, like automotive companies, only offer a full replacement of a part for a certain amount of time because of failures due to normal wear and tear on components. After the time limit they pro-rate the repair. I would definitely get my machine on the list to be repaired.
Where Pfaff can take blame is for dropping the ball in the Quality Control dept.
Where Pfaff can take blame is for dropping the ball in the Quality Control dept.
#6
Junior Member
Thread Starter
Join Date: Jun 2010
Location: Arlington, TX
Posts: 231
I agree, Mitch's Mom - quality control may be at the bottom of this. My dealer had an identical machine sitting in the shop and found it had the same problem. I purchased my machine around the middle of February.
Thread
Thread Starter
Forum
Replies
Last Post
mshollysd
Main
4
03-09-2013 05:54 AM
DogHouseMom
General Chit-Chat (non-quilting talk)
13
11-03-2011 03:50 AM