scrappy

I have a Janome Memory Craft 7500 machine. The bobbin winder froze up.what cause this & how to fix it. I'm somewhat handicap & the machine to heavy for me to take to the dealer. Any suggestion?

Sadiemae

I am curious about this also. I have a machine that the bobbin winder won't work. I haven't done anything about it because I can wind these bobbins on another machine with the same bobbins. It is just kind of a pain in the you know what...

Lilrain

A friend just had this happen, and something was not set right. And for the life of me, I can't remember what it was. Go back and check everything, just like you were rethreading, but check every nob, lever, etc

scrappy

I got a side winder from fabric.com the cost was around
$29.00. But my machine did a neater wind.

clem55

Make sure you have pushed the bobbin far enough in to start the winding. Just the other day I thought mine was all the way in, and it wasn't. Also check that the thread can flow freely. Had that happen before too.

scrappy

On this machine there is only 2 position.As soon as move it to the right it lock in. Thx Carol for reponding

Lilrain

what is the machine doing? does it run like it was winding the bobbin? where does the problem seem to be?

scrappy

The machine running just fine. No strange noises. The spool on the bobbin winder froze. Very stiff to turn. This machine dosn't use oil.

featherweight

Mine did that once and it had thread wound tight around the spindle under the bobbin holder.

scrappy

You know u might have the answer to the problem. My dd will here in May & we will take it the dealer. I will use the side winder till then. Thx