Go Back  Quiltingboard Forums > Main
help needed with quilt >

help needed with quilt

help needed with quilt

Old 04-07-2010, 06:34 PM
  #1  
Member
Thread Starter
 
Join Date: Apr 2010
Posts: 2
Default

I have pieced a quilt for the daughter of a friend who is getting married next month. I usually hand quilt, but with the shortage of time, decided to machine quilt this one. I have done a few baby quilts on the machine, but not a big one, and I am having problems. I am using an embroidery stitch on part and the top stitch is showing on the bobbin, my free motion quilting is very bad, my machine throat is small, and the whole things is just making me cry.

Do I take everything out and hand quilt and give it to her when that is finished a year or so from now? Do I tie the quilt? Would someone else be able to quilt it for me without costing me an arm and a leg?

Thanks for any advice.
danshelpmeet is offline  
Old 04-07-2010, 06:44 PM
  #2  
Senior Member
 
judee0624's Avatar
 
Join Date: Aug 2007
Location: So CA
Posts: 910
Default

Keep going. Work in sections and stop after each section to look at what you accomplished there. Adjust your tension (in the bobbin case even) if you have to. Roll up the part of the quilt that you are not working on so that it will go through the throat easier. Practice first on small sandwiches like potholder size until you get it where you want it. I don't understand what you mean by using an embroidery stitch and free motion. It is usually one or the other. Hope this helps.
judee0624 is offline  
Old 04-07-2010, 06:54 PM
  #3  
Power Poster
 
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Default

Do you have a walking foot? You can make wavy, curvy lines with a walking foot and not have to worry about accuracy or stitch length or how good your FMQ is.

Are you using the same thread in the top and bobbin? That helps a lot so that a tension problem in the stitch doesn't show so much. Also, some machines won't do a good job with an embroidery stitch used on a quilt sandwich.

If this is a very large quilt, you can peel back the top and backing from the side and cut the batting into thirds. (Use a curving cut and be sure not to catch the backing or top in the cut.) Use registration marks or pin a note to the top of the batting so later you can re-assemble the batting exactly as it was. Do this on each side, and you can quilt the middle to within 6 inches or so of each side. Then re-attach the batting on one side (with a tacking stitch by hand, or with a wide zigzag by machine), smooth the top and backing back in place, and machine quilt that side. Marti Mitchell has a book out on how to do this, but this is basically all there is to it. This greatly reduces the bulk under the arm of the machine while you are working on the middle of the quilt.

To sum up, you can make this task a lot easier by: (1) using the same thread in top and bobbin, (2) using a walking foot, (3) switching to a regular straight stitch, (3) making wavy, curving quilting lines rather than straight ones, and (4) working on only one-third of the quilt sandwich at a time.

HTH!
Prism99 is offline  
Old 04-07-2010, 06:56 PM
  #4  
Power Poster
 
amma's Avatar
 
Join Date: Jul 2007
Location: Out searching for some sunshine :-)
Posts: 58,856
Default

When I use decorative stitches for quilting, I widen them and lengthen them. Tighter stitches don't work very well for me. Even when I SID I lengthen the stitches some.
amma is offline  
Old 04-07-2010, 06:57 PM
  #5  
Google Goddess
 
Join Date: May 2009
Location: Central Indiana (USA)
Posts: 30,181
Default

nice information quilters, thanks
craftybear is offline  
Old 04-07-2010, 07:06 PM
  #6  
Pam
Super Member
 
Pam's Avatar
 
Join Date: Apr 2010
Location: Southern Illinois
Posts: 3,672
Default

HANG IN THERE, practice on smalll samples, and you will find your nitche!!
Pam is offline  
Old 04-07-2010, 07:06 PM
  #7  
Member
Thread Starter
 
Join Date: Apr 2010
Posts: 2
Default

Thanks for the advice. I am using the same thread, just different colors and am using a walking foot. I may just need to rethink this whole thing and simplify what I want to do so that my machine will work better.
danshelpmeet is offline  
Old 04-07-2010, 07:09 PM
  #8  
Pam
Super Member
 
Pam's Avatar
 
Join Date: Apr 2010
Location: Southern Illinois
Posts: 3,672
Default

Yes, simple is better! You are giving this away,it is not your life's work.
Pam is offline  
Old 04-07-2010, 08:14 PM
  #9  
Power Poster
 
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Default

Originally Posted by danshelpmeet
Thanks for the advice. I am using the same thread, just different colors and am using a walking foot. I may just need to rethink this whole thing and simplify what I want to do so that my machine will work better.
By "same thread", I meant the same color! Even on my wonderful Bernina, I will not attempt to use one color in the top and a different color in the bobbin when I am machine quilting. Some people have a machine that will do this, but most machines cannot maintain a perfectly balanced stitch through all the variations of a quilt sandwich.
Prism99 is offline  
Old 04-08-2010, 01:43 PM
  #10  
Member
 
chicagoshar's Avatar
 
Join Date: Mar 2010
Location: Chicago area
Posts: 35
Default

Great advice! One more tip - I always use a walking foot, and sometimes use invisible thread in my bobbin which lasts a long time and works well. Also, make sure you use a longer stitch than usual. I only machine quilt and have never had that problem.
chicagoshar is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ShiAnnF
Main
17
12-19-2012 10:02 PM
Little RoO
General Chit-Chat (non-quilting talk)
4
06-21-2011 11:41 PM
RocketQjQ
Main
47
03-23-2010 04:31 AM
NewsletterBot
Main
4
07-26-2007 12:16 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter