help with singer 503 topcams....
#1
Member
Thread Starter
Join Date: Jun 2012
Posts: 1
help with singer 503 topcams....
i have recently accired a 503 j and my mother a 503A singer sewing machine....our problem is with both machines we cant get the tophat cams to do what it says it does....her machine came with the cams i bought mine separate,both the cam sets are the same,supposed to be for the 503 series plus alot more.....used her instructions to insert and try cams on both machines but there must be something we arent doing because none of the cams do the designs correctly.....any help out there????thank youso much,dezigns by danielle
#3
Super Member
Join Date: Oct 2011
Location: dallas tx.
Posts: 5,172
The only thing I can tell you is if you have the cams in,[on my 603] I have to move the zig-zag lever over and move the stitch regulater up into the FINE area. Have you done that? Try and see if that works. You must have the ZZ foot on too. You have to try different settings in the[zig-zag and fine areas].
#4
Senior Member
Join Date: Nov 2011
Location: Cary, NC
Posts: 383
Along with barny's suggestions, let me add one more. Does your machine currently zigzag all the way across on its widest setting? If not, you may need to oil what's called (I think) the bellows. If you open the door on the left and look beside the needlebar, you'll see a round thing that goes in and out when the needlebar moves from side to side. It may need oiling. If it doesn't move freely, it will prevent the needlebar from stitching the pattern.
Tate
Tate
#5
Member
Join Date: Nov 2011
Posts: 73
Google instruction for that model. I was having problems with cam & didn't have it set right. Oiling the thing the previous post suggested also works. Be careful you could break needles if not set right. I have several machines with cams.
Thread
Thread Starter
Forum
Replies
Last Post
wishfulthinking
For Vintage & Antique Machine Enthusiasts
30
12-04-2014 03:23 PM
Brenda Sue
For Vintage & Antique Machine Enthusiasts
10
06-06-2010 09:23 AM