How to cut for backing fabric
#11
I have never used it, but have a look at this site.
http://www.multi-patch.com/html/fabric_calc.php
Seems to me that you do not conserve any fabric, but maybe you do.
amh
http://www.multi-patch.com/html/fabric_calc.php
Seems to me that you do not conserve any fabric, but maybe you do.
amh
I've been making charity quilts about 42 X 54. According to the standard method, they require 3 1/3 yds of backing. Using the Flynn method, I use only 2 yds. Significant savings.
For a visual explanation of the technique, try this link:
http://www.flynnquilt.com/workshop/FreeLessons/
Then scroll down to "Diagonal Pieced Back
Click here to print these instructions" and click on the link. There you will get a PDF with drawings that show just how it works. Then I would go back to
http://www.multi-patch.com/html/diag...calculator.php
to calculate the yardage of fabric needed.
I would just add one caution: because you have created a bias seam, work carefully and avoid tugging or pulling the fabric at any time. My first one wasn't perfect, but practice makes perfect, and my last one (made yesterday) is pretty darn good.
Hope this helps!
#13
I've seen it where the backing was sewn down BOTH LONG SIDES like a tube. Then one of the pieces was cut DOWN THE MIDDLE of one of the panels. This way you have one panel in the center and half a panel on each side. You also don't really lose any fabric because you can trim the excess in long strips which can also double as binding strips.
tube method and it turned out great.
Thread
Thread Starter
Forum
Replies
Last Post
chantillydreams
Main
53
02-24-2014 11:42 AM
craftybear
Links and Resources
0
05-14-2011 08:12 AM