Go Back  Quiltingboard Forums > Main
I really am not dumb but........... >

I really am not dumb but...........

I really am not dumb but...........

Old 08-28-2012, 04:22 AM
  #1  
Member
Thread Starter
 
grammy1231's Avatar
 
Join Date: Aug 2011
Location: Florida/Mn...heart in Mn
Posts: 36
Lightbulb I really am not dumb but...........

What is the difference between a 1/4" inch and a scant 1/4" seam? And where would I get such a presser foot for my husqvarna?
grammy1231 is offline  
Old 08-28-2012, 04:25 AM
  #2  
Super Member
 
HillCountryGal's Avatar
 
Join Date: Jul 2012
Location: The beautiful Texas hill country.
Posts: 1,265
Default

No doubt several others will weigh in on this one.
For me, the difference is a "thread's width".
Don't understand why patterns aren't made using a true 1/4".
HillCountryGal is offline  
Old 08-28-2012, 04:25 AM
  #3  
Super Member
 
chips88's Avatar
 
Join Date: May 2012
Location: kershaw,south carolina
Posts: 1,154
Default

i would try sew classic maybe they can help...
chips88 is offline  
Old 08-28-2012, 04:37 AM
  #4  
Junior Member
 
Freddie's Avatar
 
Join Date: Sep 2010
Location: Maine
Posts: 290
Default

The 1/4 or scant 1/4 is not that important. Every machine and every person sews differently. When do sew the block, check the size of each component of that block after you stitch. Is it coming out the size they want it to be? example: If you stitch tree strips together and each one is cut 2 1/2 inches wide, check the center strip. Is it really 2 inches wide now? If it is larger, you need to increase the width of your seam allowance. If the center strip is smaller, you will have to narrow your seam allowance. The outside strips should measure 2 1/4 inch each. Then you could cut the three strip piece in 6 1/2 inch pieces, for a block to finish 6 inch. Hope you know what I am trying to say. It is easier to show someone. Good luck!
Freddie is offline  
Old 08-28-2012, 04:48 AM
  #5  
Power Poster
 
QuiltnNan's Avatar
 
Join Date: Mar 2011
Location: western NY formerly MN, FL, NC, SC
Posts: 51,433
Default

great explanation, Freddie
QuiltnNan is offline  
Old 08-28-2012, 04:52 AM
  #6  
Super Member
 
Wanabee Quiltin's Avatar
 
Join Date: Jul 2011
Location: St. Louis suburbs
Posts: 6,084
Default

My first teacher drilled into me the 'scant 1/4 inch'. I can get it perfect if I use the Featherweight, that machine does it without me. The regular 1/4 inch is just that, it can be measured 1/4 inch if you take the ruler to it. But the scant 1/4 is less, noticable to me and to you. It is not an 1/8 for sure, but definitely not a 1/4 inch. This is my best definition: do not sew 1/4 inch but more than 1/8th.
Wanabee Quiltin is offline  
Old 08-28-2012, 04:54 AM
  #7  
Super Member
 
LindaR's Avatar
 
Join Date: Dec 2008
Location: Michigan
Posts: 2,916
Default

for "scant" I run my foot just off the edge of the fabric...
LindaR is offline  
Old 08-28-2012, 07:25 AM
  #8  
Super Member
 
Deborahlees's Avatar
 
Join Date: Mar 2011
Location: Wine Country-Southern California
Posts: 1,449
Default

I just move my needle over one click or yes run the foot just over the edge......I know that I tend to over sew my seams, meaning my seams are over a 1/4", so my pieces and then my blocks are too small....so I really concentrate on sewing a scant 1/4" which is yes between 1/8 and a 1/4". I have found I would prefer my blocks a little big and have to trim down to having them too small and having to rip out seams......This is especially true with points, for them to Really look good, then need to be dead-on....
Deborahlees is offline  
Old 08-28-2012, 07:31 AM
  #9  
Power Poster
 
Join Date: May 2008
Location: MN
Posts: 24,370
Default

There are so many OTHER variables to consider besides the seam width.

When I cut my strips, for example, they are actually about 2 -17/32 wide instead of 1-16/32 inches wide. Ruler placement on the fabric can affect how wide the strips are.

I get 'a bit bigger' when I go around a template. If my template is 4 x 4, and I cut around four sides of it, my piece will probably be close to 4-1/16 x 4-1/16. So if I use a 'regular' quarter inch seam, I'm okay.

I haven't checked the actual width of the strips using the June Tailor shape cutter, so I don't know how they come out.

So a good place to start with 'where is the problem?' is with the actual width of the component (strip, square, whatever)

If you use pre-cuts, they are probably 2.5 inches instead of a 'bit' more.

Some fabrics are bulkier than others.

Some threads are bulkier than others.

So there is MORE than just the seam width to consider when trying for a certain sized finished block/unit.

The 'sewing test strips' is really worth the time and effort!

You know how some people think that if one glass of wine is good, two will be better?
I think some people think that if a 'true' 1/4 inch seam is good, a 5/16 inch seam will be better.

The difference - to me - is about 1/64th of an inch. (or as some said, one or two threads)

Last edited by bearisgray; 08-28-2012 at 07:38 AM.
bearisgray is offline  
Old 08-28-2012, 07:44 AM
  #10  
Super Member
 
Join Date: May 2011
Location: Southeast Wisconsin
Posts: 1,070
Default

Bah! Any pattern that mentions a scant 1/4 is banished from my life. Since that measurement can't be defined it is worthless.

I also don't fret if I can't exactly meet the given dimensions of a pattern. For the most part (I said MOST not all) it just doesn't matter.

I can't imagine my grandmother sitting at her treadle worrying if she is sewing a scant 1/4" - or a precise 1/4" either and she produced some amazing quilts!

This is a hobby to be enjoyed, not to get tangled up in stuff that gives people stress.
sewmary is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AlvaStitcher
Main
23
04-25-2015 02:25 AM
JudeWill
Main
42
11-05-2013 06:18 AM
linhawk
Main
10
09-20-2013 01:17 PM
Linda-in-iowa
General Chit-Chat (non-quilting talk)
28
09-01-2011 05:19 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter