Go Back  Quiltingboard Forums > Main
I'm getting a new LA-but don't know which one to get! >

I'm getting a new LA-but don't know which one to get!

I'm getting a new LA-but don't know which one to get!

Old 08-16-2010, 01:39 PM
  #1  
Senior Member
Thread Starter
 
Diannia's Avatar
 
Join Date: Mar 2010
Location: Fresno, CA
Posts: 917
Default

HELP! My WONDERFUL hubby is getting a large bonus check and it's going to be almost $10,000 more than we expected. He just emailed me and said that he's decided to use the extra for a new LA and table for me!!! Yippy! Now all I have to do is figure out what machine to get! I've looked at the HQ AVANTE and really like it except that I was outrunning the stitch regulator. I've heard this is common but wonder if as I get better at using it then I won't have that problem. The dealer is local which is a plus. There is a Gammil dealer nearby...PLEASE tell me what you like and don't like about your LA if you have one.
Diannia is offline  
Old 08-16-2010, 02:26 PM
  #2  
Banned
 
Join Date: Jan 2007
Location: Russellville AR
Posts: 1,942
Default

Having upgraded from an HQ16 to an APQS Millennium, I can tell you that you will LOVE the stitch regulators on the commercial machines over the HQ's. The HQ is wonderful, but the big ones are so much nicer.

I personally believe you can learn to use any machine like an expert, and don't necessarily believe you have to try them all out to find the right fit.

I chose APQS for its 8 year warranty, absolutely fantastic tech support, online forum full of wonderful folks always happy to help, and the fact so many of the "super stars" use Millenniums didn't hurt matters either.

I will say that there was a bit more of a learning curve over the HQ, but I couldn't be more happy with my machine. It runs like a dream, is easy to maintain, does not vibrate at all (bad with the HQ I felt) and the stitch regulator just rocks!

It handles any thread I throw at it!
cjtinkle is offline  
Old 08-16-2010, 02:28 PM
  #3  
Power Poster
 
Join Date: Jul 2010
Location: Eastern Washington
Posts: 29,519
Default

I have a HQ16, and I love it!!! Great machine for a decent price. I got a free table for the machine when I bought too. Check for specials.
You get better with more practice, so you won't outrun the stitch regulator.
I have not had any problems with my machine either. I've had fun learning and playing on it.
Happy stitching! :)
Mariposa is offline  
Old 08-16-2010, 05:06 PM
  #4  
Power Poster
 
Join Date: Nov 2007
Location: SW Iowa
Posts: 32,855
Default

I am no help at all. All I can say is I'm green with envy. Have fun with whatever one you decide on. Keep us posted. I'm really happy for you.
littlehud is offline  
Old 08-16-2010, 08:08 PM
  #5  
Super Member
 
0tis's Avatar
 
Join Date: Mar 2010
Location: Northern California
Posts: 2,644
Default

I have the HQ Avante - (new this year) and I am still in the learning phase - but so far so good. I really like the dealer and I was very satisfied with the purchase. If I have any questions - the dealer is so easy to work with - so that may be a consideration too.
0tis is offline  
Old 08-16-2010, 08:34 PM
  #6  
Banned
 
Join Date: Oct 2009
Location: Ephrata, WA
Posts: 8,802
Default

Well I have only used a gammil and an Innova. I have an innova ( well it is coming on friday...but I work at my LQS and have been using an INnova for a year now) and I think you should read up on them...YOu can use any thread with them ..it embroiders.....they have a patent on an oil-less head....the tensioner and it is an industrial machine....and it is within your budget. The Website is www.ABMinternational.com
it shoudl tell you what you would liek to know and if you have any questions you can always PM me.
charismah is offline  
Old 08-16-2010, 09:10 PM
  #7  
Senior Member
 
Shelley's Avatar
 
Join Date: Aug 2008
Location: Wilbur, WA
Posts: 757
Default

I have an A1. Drive all the machines - this is like buying a car. You don't want to end up with a Yugo when you may have a budget for a Lincoln or a Ferrari! YOU are the one who gets to determine which machine is which car, and where your budget lies.

One feature that I would not do without is the ergo lift. LA quilting is very physical. Sometimes, just an inch up or down can make a world of difference on your back. I use different heights for the front of the machine (standing), front of the machine (sitting) and the back of the machine (doing pantos). Also make sure your handles can be adjusted. Again, sometimes just a little tweak can be all the difference you need for ok control and ultimate control.
Shelley is offline  
Old 08-16-2010, 09:19 PM
  #8  
Super Member
 
Gramof6's Avatar
 
Join Date: Jan 2010
Location: Oklahoma
Posts: 3,357
Default

Originally Posted by Shelley
I have an A1. Drive all the machines - this is like buying a car. You don't want to end up with a Yugo when you may have a budget for a Lincoln or a Ferrari! YOU are the one who gets to determine which machine is which car, and where your budget lies.

One feature that I would not do without is the ergo lift. LA quilting is very physical. Sometimes, just an inch up or down can make a world of difference on your back. I use different heights for the front of the machine (standing), front of the machine (sitting) and the back of the machine (doing pantos). Also make sure your handles can be adjusted. Again, sometimes just a little tweak can be all the difference you need for ok control and ultimate control.
Shelley is offering you some very wise advice. :wink: We also have an A1. DH runs it. We looked, researched and tried every machine out there at the Houston Inter. Show. The A1 was smoother and lighter and vibrated less than any of the others. We've had it for 3 yrs now & not 1 bit of trouble or disappointment.
Gramof6 is offline  
Old 08-16-2010, 09:19 PM
  #9  
Super Member
 
C.Cal Quilt Girl's Avatar
 
Join Date: Jun 2010
Location: Central Ca
Posts: 2,598
Default

Congrats !! Good Luck and Enjoy your new Toy :)
C.Cal Quilt Girl is offline  
Old 08-16-2010, 10:45 PM
  #10  
Super Member
 
OneMoreQuilt's Avatar
 
Join Date: Aug 2010
Location: Grant Park, IL
Posts: 1,151
Default

Congratulations! What fun. Take your time and research. I have a Gammill (12 years) and have never regretted my purchase. They provide excellent support, even now. There are many sizes to choose from to fit your needs.
OneMoreQuilt is offline  
Related Topics

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter