Go Back  Quiltingboard Forums > Main
Ironing Stations - Anyone have Experience? >

Ironing Stations - Anyone have Experience?

Ironing Stations - Anyone have Experience?

Old 01-25-2011, 06:37 AM
  #1  
Senior Member
Thread Starter
 
miholmes's Avatar
 
Join Date: Feb 2010
Location: Cedar Rapids, Iowa
Posts: 316
Default

So this past weekend I attended a "Smart Piecing" class at my LQS. Before the class they have their iron setup so we can press our fabric. They had a new one there, it was an "Ironing Station".

Now I have an $8 iron from Walmart, and it spits and spills. I've always bought a cheap iron and then thrown it out and got a new one when it starts leaking, as they seem to always do.

Anyway this iron was kinda of a DREAM to work with. No spitting, it had some heft to it (which I prefer) and it did a GREAT job. Now what would you imagine the price would be for a great iron like this?...Are you ready for me to tell you?

Here's the Iron: http://www.amazon.com/Reliable-IronM...966055&sr=1-14

$350.00!!!!!!!! I was in shock and I'm sure my eyes flew right open when they told me.

So I went online and looked around for the brand and found it on Amazon for the bargain price of $250.

Now unless the Quilt Fairy comes and leaves it in my sewing room I fear I will be left to my cheap irons. Obviously I use it a lot, but I just can't seem to justify this cost.

Has anyone used or have any experience with these types of irons? I would start saving for one, but just wanted opinions. THANKS!
miholmes is offline  
Old 01-25-2011, 06:40 AM
  #2  
Super Member
 
Lindsey's Avatar
 
Join Date: Dec 2010
Location: Bucks co PA
Posts: 1,269
Default

Pat Sloan uses a reliable Iron. Hers is not this particular one but she sells them too I do believe. I would love one that got hot and didn't spit
Lindsey is offline  
Old 01-25-2011, 06:41 AM
  #3  
Super Member
 
ontheriver's Avatar
 
Join Date: Jan 2011
Location: Selma Alabama
Posts: 3,628
Default

I would rather use a cheaper iron and save the rest of the money for fabric. I find my irons don't last long, I think because when I am sewing they are on most of the day. Just bought a new, cheap one and it is driving me crazy with automatic shutoff. I iron, go to machine to piece, get up to iron and the darned thing is turned itself off and I have to waste time waiting for it to heat back up.
ontheriver is offline  
Old 01-25-2011, 06:43 AM
  #4  
Power Poster
 
Join Date: May 2009
Location: NY
Posts: 10,590
Default

Originally Posted by ontheriver
I would rather use a cheaper iron and save the rest of the money for fabric. I find my irons don't last long, I think because when I am sewing they are on most of the day. Just bought a new, cheap one and it is driving me crazy with automatic shutoff. I iron, go to machine to piece, get up to iron and the darned thing is turned itself off and I have to waste time waiting for it to heat back up.
Here is what I do to cope with auto shutoff. I chain stitch assembly line style. When I have a bunch of units all chain stitched and ready to press I take the whole chain to my ironing board. Then I tip the iron to get it to heat up again and while it is heating I snip the theards between my chain stitched units. By the time I am done snipping the iron is heated up and ready to use.
feline fanatic is offline  
Old 01-25-2011, 06:47 AM
  #5  
Senior Member
Thread Starter
 
miholmes's Avatar
 
Join Date: Feb 2010
Location: Cedar Rapids, Iowa
Posts: 316
Default

That was ANOTHER plus to this iron it sits on a silicon pad and it doesn't turn off. It was on all through class so if anyone needed to use it.

I figure in the past 2 years I've probably purchased 6 different irons....so am I REALLY saving that much. I wouldn't mind investing in a good solid iron if I knew it would work well.

Maybe I should look into their warranty policy. For that price I assume it should be good?
miholmes is offline  
Old 01-25-2011, 06:48 AM
  #6  
Super Member
 
feffertim's Avatar
 
Join Date: Jan 2011
Location: Desert Hot Springs Ca
Posts: 2,633
Default

I have the Delongi which is almost the same but quite a bit cheaper. I do love it, the water is in the chamber below the iron rather than in the iron itself and it really works well. I think it's important to have a good steam iron for piecing.
feffertim is offline  
Old 01-25-2011, 06:51 AM
  #7  
Super Member
 
bamamama's Avatar
 
Join Date: Jan 2011
Location: Madison, AL
Posts: 1,998
Default

I have had a Black and Decker ProFinish 705 for about 10 years. It has an automatic shut off which is nice except sometimes it shuts off before I'm ready for it to. Use only distilled water in it, the iron and mineral deposits I understand is what causes an iron to clog up and spit and sputter. This one irons like a dream after all these years. I can't remember what I paid for it, but I can assure you it was not $350. Probably more like $40
bamamama is offline  
Old 01-25-2011, 08:08 AM
  #8  
Super Member
 
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Default

Search on ebay for cheaper. I've wanted one myself and almost bought one at an estate sale. But, it was dirty and they couldn't tell me if it worked and they still wanted $50 for it. Also CL...
Candace is offline  
Old 01-25-2011, 08:44 AM
  #9  
Super Member
 
Join Date: Oct 2010
Location: Iowa
Posts: 8,816
Default

There are good, inexpensive irons out there; $350 appears to be a gimmick to remove people from their money. Perhaps I am too Iowa frugal (laughter).
Murphy is offline  
Old 01-25-2011, 08:49 AM
  #10  
Senior Member
Thread Starter
 
miholmes's Avatar
 
Join Date: Feb 2010
Location: Cedar Rapids, Iowa
Posts: 316
Default

Originally Posted by Murphy
There are good, inexpensive irons out there; $350 appears to be a gimmick to remove people from their money. Perhaps I am too Iowa frugal (laughter).
Hey now I'm an Iowan as well. :)

I guess I'm chasing after my dream iron, no spitting, will last, and won't break the bank. I have no problem in investing in a good quality built product. But in the case of Irons....they all seem to be hit or miss.

I hear so many people who love their old irons that they've had for 30 years....guess they just don't make'em like they used to.
miholmes is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
15
04-07-2013 02:59 AM
craftybear
Links and Resources
7
06-02-2011 04:39 PM
carolaug
Main
6
05-06-2011 05:36 PM
QuiltE
Main
57
05-01-2011 08:30 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter