Go Back  Quiltingboard Forums > Main
How wide to cut binding >

How wide to cut binding

How wide to cut binding

Old 01-22-2011, 08:58 AM
  #1  
Super Member
Thread Starter
 
Join Date: Mar 2010
Location: Anchorage, AK
Posts: 1,392
Default

In several other threads there are responses about cutting binding strips and there are always several different ways/widths. How do you determine how wide to cut the strip? Do you always use the same width of finished binding? THESE questions relate to double binding.

While I generally use 3/8 inch seam, I do vary the width depending on the size of quilt and look I want. A trick I was taught was to determine the finished width of binding I wanted then multiply that by 7 to give me enough fabric to sew the second seam by hand. Since I do everything by machine, I usually multiply by 8 to give me enough to work with for the 3/8 seam.
ktbb is offline  
Old 01-22-2011, 09:00 AM
  #2  
Super Member
 
Join Date: Mar 2010
Location: North Carolina
Posts: 2,375
Default

I *was* doing 2.5" but always had to wrestle with it. The past couple times I've done 2.75 and it's worked out well!
Rebecca VLQ is offline  
Old 01-22-2011, 09:03 AM
  #3  
Super Member
Thread Starter
 
Join Date: Mar 2010
Location: Anchorage, AK
Posts: 1,392
Default

what size seam do you use with this width of strip?
Originally Posted by Rebecca VLQ
I *was* doing 2.5" but always had to wrestle with it. The past couple times I've done 2.75 and it's worked out well!
ktbb is offline  
Old 01-22-2011, 09:07 AM
  #4  
Super Member
 
RkayD's Avatar
 
Join Date: Sep 2010
Location: Oklahoma
Posts: 1,830
Default

Originally Posted by Rebecca VLQ
I *was* doing 2.5" but always had to wrestle with it. The past couple times I've done 2.75 and it's worked out well!
is this for double fold? I struggle with the width too. I get it right on one side but its either too much on one side or barely enough. I can't ever seem to get it right.
RkayD is offline  
Old 01-22-2011, 09:19 AM
  #5  
Super Member
Thread Starter
 
Join Date: Mar 2010
Location: Anchorage, AK
Posts: 1,392
Default

Originally Posted by RkayD
is this for double fold? I struggle with the width too. I get it right on one side but its either too much on one side or barely enough. I can't ever seem to get it right.
The intent of my question was for double fold and I've edited my original post to reflect that - thanks for asking.
ktbb is offline  
Old 01-22-2011, 09:20 AM
  #6  
Super Member
 
QultingaddictUK's Avatar
 
Join Date: Jan 2011
Location: North Wales UK
Posts: 2,028
Default

I always cut 2.5", 2.38" if using thin batting. I sew the binding on with a 3/8" seam and when I turn it over I can normally use my "Blanket" stitch on my machine and catch the front and back, makes it so much quicker, and easier to finish off a quilt.
QultingaddictUK is offline  
Old 01-22-2011, 09:22 AM
  #7  
Senior Member
 
lllog's Avatar
 
Join Date: Nov 2010
Location: Camdenton MO
Posts: 453
Default

We do the double fold and cut the fabric at 2.5".

Lanny
lllog is offline  
Old 01-22-2011, 10:09 AM
  #8  
Power Poster
 
amma's Avatar
 
Join Date: Jul 2007
Location: Out searching for some sunshine :-)
Posts: 58,856
Default

I cut the strips from 2" up to 3" depending on the look I want.

Each type of batting and the particular loft, fills the binding differently, so auditioning binding onto these scraps may be helpful.

Make mini quilt sandwiches. Cut two fabrics and batting 4" wide X 6" long.

Cut a few scrap bindings 2 1/4" - 2 1/2" X 6" and sew them onto the mini sandwiches. You can then play with the seam allowance as well as the width of your binding. Fold the binding over, and make changes according to how you want the finished binding to look.

Write in pen on these samples, the type/loft of batting, width of binding strip, seam allowance, etc... or staple them to a sheet of paper and write the info on that. Then you can refer back to them on future projects :D:D:D
amma is offline  
Old 01-22-2011, 10:14 AM
  #9  
Super Member
 
mollymct's Avatar
 
Join Date: Jun 2010
Location: MS
Posts: 2,342
Default

Right now I'm using the guidelines Eddie taught me. I cut my binding strips 2 7/8 in., sew the folded strip on the front--a 1/4 seam and bring around to the back. I finish with stitching in the ditch next to the top binding and this size strip gives me enough width to be sure the back is stitched down. Works great!! Especially in combination with glueing down the binding on the back.
mollymct is offline  
Old 01-22-2011, 10:38 AM
  #10  
Banned
 
Join Date: Mar 2010
Location: Sturbridge, Ma
Posts: 3,992
Default

a general guide is to cut your unfolded binding 6 times the width of your seam allowance and adjust from there. I had been cutting 2.5" for a 3/8" seam but found that a bit wide so now cut 2.1'4" and it is better fit.
When you get your binding sewed, then look at it and you should be able to divide it into thirds and take consideration in the space taken up in fold.
Holice is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tropit
Main
59
12-25-2015 01:37 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter