Go Back  Quiltingboard Forums > Main
Just a Question on Puckers >

Just a Question on Puckers

Just a Question on Puckers

Old 09-24-2012, 08:05 AM
  #1  
Junior Member
Thread Starter
 
RitaFaye's Avatar
 
Join Date: Feb 2011
Posts: 202
Default Just a Question on Puckers

Ok I am sewing blocks down after batting and backing
so I start getting puckers after a few rows like the material is too big.
All blocks are the same size and I am using a pretty zig zag stitch instead of
stitch in the ditch........did I not pin it tight enough? or is there a certain rule in
sewing the rows in a certain order I pinned every 5 inchs or so......thanks Rita
RitaFaye is offline  
Old 09-24-2012, 08:09 AM
  #2  
Super Member
 
Scissor Queen's Avatar
 
Join Date: Jul 2009
Location: Southwest Kansas
Posts: 4,820
Default

Originally Posted by RitaFaye View Post
Ok I am sewing blocks down after batting and backing
so I start getting puckers after a few rows like the material is too big.
All blocks are the same size and I am using a pretty zig zag stitch instead of
stitch in the ditch........did I not pin it tight enough? or is there a certain rule in
sewing the rows in a certain order I pinned every 5 inchs or so......thanks Rita
Are you using a walking foot?
Scissor Queen is offline  
Old 09-24-2012, 08:16 AM
  #3  
Power Poster
 
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Default

Puckering usually occurs because the fabric gets stretched. A walking foot helps because it feeds the top and bottom layers more evenly. However, for me, it's not enough to prevent puckers. Here's what I do.

Before layering, I *heavily* starch the backing fabric. I use a 1:1 solution of Sta-Flo liquid laundry starch, "paint" this on with a large wall painting brush until the fabric is saturated, toss in the dryer, then iron with steam. This stabilizes the backing so it doesn't stretch and get puckers sewn in when I quilt. I spray starch the top before layering.

For layering, I spray baste. Spray basting holds the layers together everywhere (instead of a joining point every 5" with pins), which helps prevent fabric from stretching.

Be careful how you handle the quilt, especially when crossing quilting lines. The tendency is to push and pull the quilt, especially to prevent a pucker when crossing a quilting line, but this only makes everything worse. You want to be sure that there is no drag around the area being quilted. This includes making sure the rest of the quilt isn't hung up on an edge and also making sure that you are not stretching the fabric with your hands as you quilt. *Smoothing* the quilt around the needle is okay; *stretching the fabric around the needle ultimately creates puckers.

Edit: Even now you may be able to reduce puckers by spray starching the top and backing. Lay out the quilt on the floor, spray with starch, allow the layer to dry (a fan on the quilt helps), mist again with spray starch. Do both sides maybe 3 times. This will help stabilize the fabric so it has less of a tendency to stretch while machine quilting.
Prism99 is offline  
Old 09-24-2012, 08:32 AM
  #4  
Super Member
 
Join Date: Mar 2012
Location: Texas, USA
Posts: 5,896
Default

If you're using a regular presser foot, you might also need to check your presser foot pressure; it may need reducing, to help move the sandwich more evenly. A walking or dual-feed foot makes a world of difference!
Neesie is offline  
Old 09-24-2012, 08:56 AM
  #5  
Junior Member
Thread Starter
 
RitaFaye's Avatar
 
Join Date: Feb 2011
Posts: 202
Default

Wow great tips everyone, thanks so very much........
RitaFaye is offline  
Old 09-24-2012, 09:02 AM
  #6  
Super Member
 
DogHouseMom's Avatar
 
Join Date: Jan 2011
Location: Knot Merrill, Southern Indiana
Posts: 5,781
Default

Prism's suggestions right on the mark. Would add that the hand position is different when quilting than when sewing - even if just sewing straight lines with a walking foot.

When quilting, position each hand on either side of the needle. Palms down, with fingers splayed to get maximum "coverage". Keep slight pressure (not pulling exactly, just keeping taut) on the quilt top. At first you may need to stop frequently to reposition your hands, but with time you'll be able to "walk" your hands down as the quilt moves through the machine.

The purpose is to keep the quilt top taut (but not stretched) in a large area - ie the width and breadth of your splayed palms, as opposed to keeping it taut by placing your hands in the usual "sewing" position (one at the bottom feeding the fabric, and the other at the back - usually working with fingers alone).

If I see a small pucker start to develop near a quilted line - I'll lift my presser foot (with needle down) and "relax" the fabric away from the pucker with both of my splayed palms, then continue sewing.
DogHouseMom is offline  
Old 09-24-2012, 09:18 AM
  #7  
Power Poster
 
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Default

In case you decide to do the spray starching now, I forgot to mention that you lay the quilt out on a *large* flat sheet first to catch overspray! Toss the sheet in the laundry when done.
Prism99 is offline  
Old 09-24-2012, 11:02 AM
  #8  
Super Member
 
Join Date: Aug 2010
Location: Piedmont Virginia in the Foothills of the Blue Ridge Mtns.
Posts: 8,562
Default

As soon as I read "tight enough" I thought that was your problem. Glad others addressed it, too.

Jan in VA
Jan in VA is offline  
Old 09-24-2012, 11:18 AM
  #9  
Junior Member
Thread Starter
 
RitaFaye's Avatar
 
Join Date: Feb 2011
Posts: 202
Default

I think I've got it now, thanks all --your such a wonderful bunch of ladies and guys.........and I appreciate you.
RitaFaye is offline  
Old 09-24-2012, 11:43 AM
  #10  
Junior Member
 
coffeebreak's Avatar
 
Join Date: Apr 2012
Posts: 142
Default

Originally Posted by Neesie View Post
If you're using a regular presser foot, you might also need to check your presser foot pressure; it may need reducing, to help move the sandwich more evenly. A walking or dual-feed foot makes a world of difference!
I tried the walking foot this week and it didn't seem to do any different..but was more cumbersome. How do you reduce the pressure on the regular foot? Have not tried that!
coffeebreak is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
quiltykim
Main
13
11-25-2016 12:28 PM
cmilton
Main
9
01-11-2011 12:40 PM
liviamarie3
Main
12
07-24-2010 06:59 PM
CajunQuilter2
Main
43
06-04-2010 07:31 AM
Debbie B
Main
17
03-29-2010 12:40 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter