Go Back  Quiltingboard Forums > Main
Machine Quilting Newbie, Part 2: HELP!!!!!!!!! >

Machine Quilting Newbie, Part 2: HELP!!!!!!!!!

Machine Quilting Newbie, Part 2: HELP!!!!!!!!!

Old 11-04-2010, 05:13 PM
  #1  
Member
Thread Starter
 
lizcake's Avatar
 
Join Date: Mar 2010
Location: Knoxville
Posts: 41
Default

I have officially done it!! I have put the first machiine stitches into my first fully machine quilted quilt. Not as scary as I thought, but still, terrifying. Now, after working for one hour, I have a series of questions!

First: Is the free-motion/darning foot supposed to sit all the way down to the quilttop the way your regular presser foot does? Cuz mine doesn't, and it's making it difficult to move my hands when I need to shift the quilt.

Second: Why is my machine skipping stitches? See photo.

Third: I started tonight on the foundation(?) quilting, the in-the-ditch quilting that is supposed to be invisible and anchor everything down before I begin working in the blocks. Since my stitches are clearly NOT invisible since I still haven't managed to make a consistently straight stitch(again, see photo, #2)), when I begin the background free-motion quilting, can I or should I not quilt over the ditch stitches. I know you're not supposed to cross over your free-motion stitches,but does that apply to the foundation stitches?

Fourth: Any other hints? This quilt is for my bf's first baby, and of course I want it to be special, and perfect. I know, perfection doesn't exist beyond the first inch or two, but I still want it to be perfect.

Photo #1: look about 1 inch to the right of the pin, there are two largish skips.
[ATTACH=CONFIG]119280[/ATTACH]

Photo #2: Middle of photo, you can see where I went wonky and then had to try to get back in line.
[ATTACH=CONFIG]119281[/ATTACH]
Attached Thumbnails attachment-119275.jpe   attachment-119276.jpe  
lizcake is offline  
Old 11-04-2010, 05:29 PM
  #2  
Super Member
 
Margie's Avatar
 
Join Date: Mar 2007
Location: Murrysville, PA
Posts: 3,007
Default

I am looking forward to the tips for stitch in the ditch. I find that really hard. I think you are supposed to stay a little to the side not in the middle...but not sure.
Margie is offline  
Old 11-04-2010, 05:34 PM
  #3  
Super Member
 
mommamac's Avatar
 
Join Date: Oct 2010
Location: Coast of Maine
Posts: 2,926
Default

I'm learning from your questions - can't wait for answers!
mommamac is offline  
Old 11-04-2010, 05:36 PM
  #4  
Power Poster
 
Tweety2911's Avatar
 
Join Date: Jun 2010
Location: New York
Posts: 17,564
Default

There are many experts here, I am not one, but I find using the walking foot for the straight stitching and the darning foot (which does not sit like your regular foot) for FMQ designs, ie. curves, loops, etc. Learning to use your hands and foot take lots of practice to get the stitches even, and well worth the effort. Try working on a practice piece of fabric layered with batting and backing fabric. Good Luck! Your quilt is lovely.
Tweety2911 is offline  
Old 11-04-2010, 05:38 PM
  #5  
Super Member
 
SuziC's Avatar
 
Join Date: Nov 2006
Location: Upstate NY
Posts: 3,683
Default

Your foot should not be resting on the fabric like the reg feet. It is not suppose to hold down your fabric.
SuziC is offline  
Old 11-04-2010, 05:48 PM
  #6  
Senior Member
 
katybob's Avatar
 
Join Date: Sep 2010
Location: Tampa, Florida
Posts: 823
Default

Make sure your feed dog is down when you're using the darning foot and when you need to readjust your hands, make sure your needle is down. The stitches will get better the more you practice -- it's a matter of getting your foot pressure and hand movements coordinated and it takes practice. I also use a walking foot with the feed dogs up when I'm straight stitching.
katybob is offline  
Old 11-04-2010, 05:50 PM
  #7  
Super Member
 
Join Date: May 2009
Location: Central PA
Posts: 5,573
Default

For the skipped stitches, make sure everything is threaded correctly. Then make sure your tension is correct, lastly, make sure you are using the correct needle size. Remember that the quilt sandwich is much thicker than when piecing and that necessitates a different needle. There are needles specifically for quilting, but some folks use a topstitch needle. I am sure some of the folks on here can help more, but that is what came to mind.
As for stitching in the ditch, try a matching thread, and as Margie said, line up your presser foot so you are stitching just a little to the side of the seam. Go to You Tube search stitch in the ditch, and they are tons of videos to see how to do it. Good luck.
nursie76 is offline  
Old 11-04-2010, 05:53 PM
  #8  
Super Member
 
azwendyg's Avatar
 
Join Date: Jun 2010
Location: Flagstaff, AZ
Posts: 2,078
Default

I don't consider myself to be an "expert", but I'm a couple of jumps ahead of you on the learning curve. I'm working on "real" FMQ quilt #5 now and in the past year I've worked through all of the troubles that you are experiencing!

Let's see if I can help you out with some of my experiences.... (In addition to all the good tips above.)

Originally Posted by lizcake
I have officially done it!! I have put the first machiine stitches into my first fully machine quilted quilt. Not as scary as I thought, but still, terrifying. Now, after working for one hour, I have a series of questions!

First: Is the free-motion/darning foot supposed to sit all the way down to the quilttop the way your regular presser foot does? Cuz mine doesn't, and it's making it difficult to move my hands when I need to shift the quilt.
No, the free-motion/darning foot is not supposed to sit all the way down like a normal foot does. It only really presses on the quilt as the actually stitch is being made; as your needle goes down, the presser foot also goes down a bit, and when the needle comes up, so does the presser foot. Be sure to put your needle in the "down" position every time you stop. That will allow you to rearrange the quilt without loosing your place so to speak.
Originally Posted by lizcake
Second: Why is my machine skipping stitches? See photo.
Probably because the rate at which you are moving the quilt is not consistent. When you speed up the motion of the quilt suddenly, stitches will skip. (I've also had this happen when I am using some "bad" i.e. cheap and nasty thread.)

Originally Posted by lizcake
Third: I started tonight on the foundation(?) quilting, the in-the-ditch quilting that is supposed to be invisible and anchor everything down before I begin working in the blocks. Since my stitches are clearly NOT invisible since I still haven't managed to make a consistently straight stitch(again, see photo, #2)), when I begin the background free-motion quilting, can I or should I not quilt over the ditch stitches. I know you're not supposed to cross over your free-motion stitches,but does that apply to the foundation stitches?
Here's my "secret" for stitch in the ditch: I use my walking foot if at all possible, instead of FMQ! I try to plan m SID so that I can do straight, uninterupted lines all the way across the quilt and not have to make turns.

Originally Posted by lizcake
Fourth: Any other hints? This quilt is for my bf's first baby, and of course I want it to be special, and perfect. I know, perfection doesn't exist beyond the first inch or two, but I still want it to be perfect.
I always try out my quilting on a practice piece right before I start on the real thing to make sure everything is in order.
Because you are putting your heart into this quilt~It WILL be special and perfect!
azwendyg is offline  
Old 11-04-2010, 06:02 PM
  #9  
Power Poster
 
amma's Avatar
 
Join Date: Jul 2007
Location: Out searching for some sunshine :-)
Posts: 58,856
Default

Hon, I would not use your darning foot for SID. That foot is for FMQ and until you get used to FMQ you will get skips like that, and loose control over the stitching.

FMQ is where you drop your feed dogs and move your fabric all around underneath your needle. We do this when we want to make circles, feathers and other shapes.

SID is following your seamlines

Cross hatching is usually stitching diagonal lines across your quilt.

You can cross your stitching lines when you SID :D:D:D

It is NOT a hard and fast rule that you can't cross your stitching lines when you FMQ either :wink:

If you don't have a walking foot, use your basic sewing foot for doing SID :wink: I think you will be much happier with your stitching. You will have MUCH more control over where your stitching ends up :D:D:D

If you don't have a walking foot, it is a great investment :D:D:D
amma is offline  
Old 11-04-2010, 06:03 PM
  #10  
Power Poster
 
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Default

I find stitch-in-the-ditch really hard to do. On the few occasions when I attempt it, I use a walking foot. I would find it impossible to do stitch-in-the-ditch with a darning foot.

The darning foot does ride higher than other feet, to allow movement of the quilt. It would be used for free motion quilting.

It sounds as if you may be using a darning foot to do stitch-in-the ditch. If so, that could be your biggest problem. There are accomplished quilters who can do SID that way, but it's not for a beginner.
Prism99 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
5
09-25-2011 04:02 PM
craftybear
Links and Resources
7
05-05-2011 08:52 AM
craftybear
Links and Resources
4
04-24-2011 08:25 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter