Go Back  Quiltingboard Forums > Main
Martinelli Slotted Rulers >

Martinelli Slotted Rulers

Martinelli Slotted Rulers

Old 02-26-2011, 08:43 PM
  #1  
Super Member
Thread Starter
 
Join Date: Jan 2008
Location: currently central new jersey
Posts: 8,623
Default

at the hampton roads quilt show i saw the new martinelli slotted ruler. it has many slots, a lot like the june taylor one, it's measured off in 1/2's and it's made the same way as the one that only has one slot. it doesn't slide around and - are you sitting down? - it costs $89.99 at the show and will cost $119.99 online plus s/h when they get it there. it is brand new. at the shows they sell the small mat, the rotary cutter and the old slotted ruler for the package price of $199.99. i don't know if they will offer it online.

$119.99? really?


btw, the old one that only cuts only one strip at a time is selling for a mere $49.99 at the shows instead of $69.99, which is the new full price. it almost makes you want to run out and buy the new one at $89.99, doesn't it?
butterflywing is offline  
Old 02-26-2011, 08:50 PM
  #2  
Super Member
 
Join Date: Feb 2010
Location: Maryland
Posts: 3,586
Default

does it work better than the june taylor ruler?
virtualbernie is offline  
Old 02-26-2011, 09:19 PM
  #3  
Super Member
Thread Starter
 
Join Date: Jan 2008
Location: currently central new jersey
Posts: 8,623
Default

a lot of people think they're lot better and in some ways they are. they don't slip at all. they have some kind of rubber on the bottom that grabs the fabric and holds on so that when you cut you get a straight cut every time. if you move the ruler, the fabric moves with the ruler exactly and stays in place. they're also very resistant to cuts and scratches, the guy really slams the ruler with the rotary blade and the edge stays unmarred. on the negative side, they weigh a lot. and of course they're a lot more money.

the june taylor, or tailor, ones are thinner and do get cut up. they have a tendency to bend sideways unless you hold the rotary cutter absolutely straight up and down and the blade doesn't always fit properly in the slot. but they're cheaper and they weight less.

up until recently, the martinelli ruler had only one slot, so you had to cut, then move, then cut, then move, etc. with the jt one, you could cut many at a time before you moved it. now it's not true. you can cut several with the martinelli, but imo the price is prohibitive for a ruler.
butterflywing is offline  
Old 02-27-2011, 08:42 AM
  #4  
Power Poster
 
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Default

Wow, thanks for the description! I was wondering if they were actually better. I agree that the price is prohibitive unless maybe you are new to quilting and don't have a June Tailor mat and an Accuquilt Go! (unlike me).
Prism99 is offline  
Old 02-27-2011, 08:55 AM
  #5  
Super Member
Thread Starter
 
Join Date: Jan 2008
Location: currently central new jersey
Posts: 8,623
Default

Originally Posted by butterflywing
at the hampton roads quilt show i saw the new martinelli slotted ruler. it has many slots, a lot like the june taylor one, it's measured off in 1/2's and it's made the same way as the one that only has one slot. it doesn't slide around and - are you sitting down? - it costs $89.99 at the show and will cost $119.99 online plus s/h when they get it there. it is brand new. at the shows they sell the small mat, the rotary cutter and the old slotted ruler for the package price of $199.99. i don't know if they will offer it online.

$119.99? really?




btw, the old one that only cuts only one strip at a time is selling for a mere $49.99 at the shows instead of $69.99, which is the new full price. it almost makes you want to run out and buy the new one at $89.99, doesn't it?
for those who don't know me too well, i'm being sarcastic. in my opinion that kind of money is way too much for a ruler. i think we should learn to use what we have. there are products on the market such as invis-a-grip that will make the ruler grab the fabric.

i don't want to add anything more to my already cluttered space.
there are so many good products on the market that is i bought them all, i'd need to move out.
butterflywing is offline  
Old 02-27-2011, 09:00 AM
  #6  
Super Member
 
Join Date: Aug 2010
Location: CA & NM
Posts: 1,120
Default

I "have" a June Tailor ruler with 1/2 in slots. Used it in October and some gremlin has eaten it! I don't know what safe place I put it in. Certainly wanted to keep it from bending and breaking. But it is so safe I can't use it!!!! Guess I will have to run right out and buy one of these NEW ones. NOT!
sherriequilts is offline  
Old 02-27-2011, 09:11 AM
  #7  
Member
 
Join Date: Jun 2009
Location: Va Beach VA USA
Posts: 6
Default

I have the Martinelli slotted ruler, for $79.99, do not like it,, called Martinelli, lady said that I can ship it back at my cost and she would send me the five 45mm blades, which only cost about $40.00. Am I getting jipped or what?

Good thing I have a local rep, she told me to wait till after the Mid-Atlantic quilt show in Hampton and she would help me.

I went to the Quilt show Thursday, first day,,lol right by the door with all these women behind me,, it was like the running of the bulls,too funny. I was very proud of myself in my spending, buffet was good and lots of variety this year. I live in Virginia Beach so not too far to go to get to the show.
Take care and have a wonderful day!
LindaJoy is offline  
Old 02-27-2011, 09:13 AM
  #8  
Super Member
 
DogHouseMom's Avatar
 
Join Date: Jan 2011
Location: Knot Merrill, Southern Indiana
Posts: 5,781
Default

For $90 I expect to lay the darn thing down on my fabric and it will do all the cutting for me.
DogHouseMom is offline  
Old 02-27-2011, 09:23 AM
  #9  
Super Member
 
Join Date: Feb 2010
Location: Maryland
Posts: 3,586
Default

Originally Posted by butterflywing
Originally Posted by butterflywing
at the hampton roads quilt show i saw the new martinelli slotted ruler. it has many slots, a lot like the june taylor one, it's measured off in 1/2's and it's made the same way as the one that only has one slot. it doesn't slide around and - are you sitting down? - it costs $89.99 at the show and will cost $119.99 online plus s/h when they get it there. it is brand new. at the shows they sell the small mat, the rotary cutter and the old slotted ruler for the package price of $199.99. i don't know if they will offer it online.

$119.99? really?




btw, the old one that only cuts only one strip at a time is selling for a mere $49.99 at the shows instead of $69.99, which is the new full price. it almost makes you want to run out and buy the new one at $89.99, doesn't it?
for those who don't know me too well, i'm being sarcastic. in my opinion that kind of money is way too much for a ruler. i think we should learn to use what we have. there are products on the market such as invis-a-grip that will make the ruler grab the fabric.

i don't want to add anything more to my already cluttered space.
there are so many good products on the market that is i bought them all, i'd need to move out.
I use the True Grip dots--they seem to work better than the other ones and are a little flatter. The sand paper ones work well also. Certainly cheaper than spending $90!
virtualbernie is offline  
Old 02-27-2011, 11:09 AM
  #10  
Super Member
Thread Starter
 
Join Date: Jan 2008
Location: currently central new jersey
Posts: 8,623
Default

LindaJoy, what did they do for you at the show? i'd love to know.

i was there the first day and you're right about the mob - they run right over you, right after the count-down part is done. btw, it doesn't get better the second day, just more mob.

there's no way i'll spend that much money on a ruler, slots or no slots. i quilted before they made those rulers and i'll manage without them now. i treated myself to a june taylor one a long time ago (whole 'nother story), i use it when i remember to, and that's enough for me.
butterflywing is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nativetexan
Main
19
08-24-2019 02:45 PM
Geri B
Links and Resources
43
02-02-2017 02:39 PM
Auntevie
Main
21
03-22-2016 06:43 PM
shesews
Main
9
11-25-2014 11:21 AM
bubblegum1286
Main
149
02-27-2011 09:32 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter