Advice on free motion quilting...
#1
Member
Thread Starter
Join Date: Aug 2012
Posts: 10
Advice on free motion quilting...
Hi! I'm relatively new to quilting- I've FMQ a baby+ sized quilt and make another easy strip quilt. I just bought a Bernina 530 and am debating about the best way to quilt. I've been seriously considering getting a straight stitch machine like the Brother PQ1500S for my quilting- these machines look like powerhouses and I wouldn't worry as much about damaging the machine while doing FMQ as I would with my new Bernina. (I noticed when FMQ my last quilt that it seemed hard on my Pfaff 2046). Or should I just spend the money on a BSR? Or is it not worth it to shell out more money, and just go for it on my Bernina?
Thanks!
Robin
Thanks!
Robin
#2
Power Poster
Join Date: Mar 2009
Posts: 15,639
Wow, that's a tough one. Bernina is generally known as a tough machine, and I wouldn't worry about it not handling the quilting. What is the throat space on the Bernina? The bigger the throat space, the easier the quilting because you have to manhandle less bulk through a narrow space. I just bought a HQ Sweet 16 to do my FMQ because the Pfaff Grandquilter (the equivalent of the Brother 1500) did not provide me with adequate space.
The Brother is a straight-stitch machine and it sews very fast. If you wanted to set it up for just your quilting then you wouldn't have to change the settings on the Bernina from piecing.
Knowing now what I didn't know then, I would not buy the Pfaff. I would continue to use the DSM and save my money for a dedicated sit-down quilting machine. Good luck and have fun with your decision.
The Brother is a straight-stitch machine and it sews very fast. If you wanted to set it up for just your quilting then you wouldn't have to change the settings on the Bernina from piecing.
Knowing now what I didn't know then, I would not buy the Pfaff. I would continue to use the DSM and save my money for a dedicated sit-down quilting machine. Good luck and have fun with your decision.
#3
I have a Bernina 430, with the BSR. If I had to do it over again, I would not get the BSR. It didn't help that much, and I found the results with my open toe stippling foot to be virtually the same as the results with the BSR.
Your Bernina should do just fine with FMQ. I used my 430 for the first time in a long time recently, and I'd forgotten how quiet and well-behaved it is while quilting. My previous machine broke needles like they were going out of style, and it's a pleasure to be able to sit and sew without waiting for something bad to happen.
Janet
Your Bernina should do just fine with FMQ. I used my 430 for the first time in a long time recently, and I'd forgotten how quiet and well-behaved it is while quilting. My previous machine broke needles like they were going out of style, and it's a pleasure to be able to sit and sew without waiting for something bad to happen.
Janet
#4
Member
Join Date: Jun 2011
Location: Murrieta, CA
Posts: 64
I have a 10 year old (or older) Bernina Virtuosa 150 on which I've machine pieced/quilted quite a number of quilts, from wall hanging to king sized, with a lot of meanders. Never noticed any degradation in the machine.
#5
Super Member
Join Date: Jan 2012
Location: The Colony, TX
Posts: 3,364
Before you buy the BSR - go into your dealer with some samples and have them let you try it. Some people love it and others not so much. I am thinking you could get a Brother 1500 for about the same price as the BSR foot, so unless you LOVE the BSR that is the way I would go. That being said you can quilt on your Bernina (without the BSR) perfectly fine. The Brother does give you a little more throat space.
#6
Member
Thread Starter
Join Date: Aug 2012
Posts: 10
Thanks, all! I should add that I have not yet bought a walking foot for the Bernina ($170ish). I could also get the walking foot plus the bsr for $800 total but need to make a quick decision on that as it's supposed to be a day of purchase deal only (I bought 2 days ago). Of course I'd also want to get an extension table so thats another $100... The brother comes wih a walking foot and an extension table and is $700. My bernina has 7.5" space to the right of the needle and the brother has 8.9". I'm definitely limited by price. Any other input would be greatly appreciated!
Last edited by monkeymoto; 08-23-2012 at 01:15 PM. Reason: posted before finished
#7
Super Member
Join Date: Aug 2009
Location: The middle of an IL cornfield
Posts: 7,014
I know nothing about your Bernina, but I do hve the Brother machine you mentioned. The Brother is a good machine for me. I can quilt a king size quilt on it without going crazy. My Brother came with the extension table and the walking foot.
#9
I have the PQ1500, and yes, you can set it to the needle down position. I've only made one quilt with it so far. The needle always stopped in the down position. I loved it for FMQ, but I have nothing to compare it to. I'm new at this and hand-quilted the only other one I've made.
#10
Member
Join Date: May 2011
Posts: 31
I have a Bernina 430, with the BSR. If I had to do it over again, I would not get the BSR. It didn't help that much, and I found the results with my open toe stippling foot to be virtually the same as the results with the BSR.
Your Bernina should do just fine with FMQ. I used my 430 for the first time in a long time recently, and I'd forgotten how quiet and well-behaved it is while quilting. My previous machine broke needles like they were going out of style, and it's a pleasure to be able to sit and sew without waiting for something bad to happen.
Janet
Your Bernina should do just fine with FMQ. I used my 430 for the first time in a long time recently, and I'd forgotten how quiet and well-behaved it is while quilting. My previous machine broke needles like they were going out of style, and it's a pleasure to be able to sit and sew without waiting for something bad to happen.
Janet
God Bless
gml
Thread
Thread Starter
Forum
Replies
Last Post