Help with Monofilament thread
01-21-2012, 08:23 AM
#1
Super Member
Thread Starter
Join Date: Aug 2010
Location: Delmarva Peninsula
Posts: 1,151
Help with Monofilament thread
I have 10 year old monofilment thread that came with my Janome. I just read posts about doing "hand stitching" effect using your machine and want to try it and it calls for using monofilament thread on top, and color contrasting thread in the bobbin. Problem is, can I still use the 10 year old monofilament thread? I don't want to cause my Janome any "hiccups" with bits of the thread that may get stuff in places I cannot see. Any advise???
01-21-2012, 08:31 AM
#2
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
first off- threads have changed alot in 10 years- is it like fishing line? going to be poky-if a thread breaks? stretches, melts when touched with an iron?
if any of these things are true i would not use it-
if it is soft (like thread) does not melt when touched with the iron, does not poke like a piece of fishing line/wire you could try it. some of the invisible threads from back then were pretty horrible- and they stretch & break if you sew too fast- cause puckering-
you might want to do some research on the differences in invisible threads and make sure you have one that is right for your project- some are much better suited for wallhangings/ some are ok for used items (like bed quilts)
if any of these things are true i would not use it-
if it is soft (like thread) does not melt when touched with the iron, does not poke like a piece of fishing line/wire you could try it. some of the invisible threads from back then were pretty horrible- and they stretch & break if you sew too fast- cause puckering-
you might want to do some research on the differences in invisible threads and make sure you have one that is right for your project- some are much better suited for wallhangings/ some are ok for used items (like bed quilts)
01-21-2012, 10:37 AM
#4
Senior Member
Join Date: Nov 2011
Location: Las Vegas, NV
Posts: 926
Please let us know if you master this stitch! I've been trying it with a clear poly thread, but so far no luck. I have seen others with the Janome 6600P that have had success, but I'm not one of them, wish I were!
01-21-2012, 06:47 PM
#5
Senior Member
Join Date: Apr 2010
Location: Lived in San Diego now retired in Eagar, AZ.
Posts: 887
i never use it... i don't care how soft it is now, it's still fishing line, by definition, 'monofilament' and it can cut thru metal over time... there are thousands of wonderful threads out there ... try Superior Threads
Thread
Thread Starter
Forum
Replies
Last Post
