Holice

It is the fleese that would give me problems. I have made many many curtains and drapes over the years and I would not try the fleese as the texture is not the same. Top is woven and fleese is knitted fabric so they are going to hang differently. The fleese is going to stretch and the top is not. Without seeing it it is my opinion that you are going to have real frustration and problems making them with the two different types of fabric. I made some large draps with a block out lining that had a rubberized surface. I will never do that again. Just too much problem.

QuiltnCowgirl

Your lining fabric will be cut smaller than the curtain fabric. The two fabrics are laid out together with the lining on top of the curtain fabric. Wrap the larger curtain fabric around the lining fabric and stitch.(kinda like using the backing fabric on a quilt to bind it) Do this on the 2 sides and the bottom edge. The top edge is folded down large enough to make the casing.

This gives more specific instructions
http://www.ehow.com/how_4422242_make...-curtains.html

The fleece & cotton fabric are not really compatible. The fleece is bulky & will never hang nicely. Best options would be blackout fabric, insulated fabric or at the very least use flannel rather than fleece.

C.Cal Quilt Girl

If using the fleece, make sure to pre wash all, don't want that to shrink once it's put together. Bought some the other day and after washed wondered where it went lost a couple of inches all around.

Pillow case turned should work, with a casing, like to leave enough on the top for a little ruffle over the rod, and a minimum of twice to three times as wide as the window.
Have Fun !!

quilt1950

I've made several curtains/drapes also, and I agree that using fleece could be a problem. If you do use fleece, I don't think I would make them 2-3 times wider than the window. Too bulky. I've used the warm window products with great success, but only for roman shades.

I wonder if you could make two separate curtains, and hang them together, sort of like a shower curtain and liner. Just trying to think outside the box.

spinnergs

I made lined curtain for my greatroom and used a cotton lining and a good flannel (prewashed!) for the insulating portion. Worked great!

miss_ticky2

Whenever I've made curtains and linings I've always made them separate. I've had my lining just slightly shorter than my curtain and I've attached them to the main curtain with little hooks available for just that.

However, I see you're going to do casings at the top so what I would probably do is lay the lining (in this case, fleece) on top of the curtain fabric (on the wrong side) so that when you fold over the top edge of the curtain fabric to make the casing, you make sure you catch the lining under the bottom edge of the casing. Or you could line both fabrics up at the top and fold them together. That will depend on the thickness it creates. Then I would let both the curtain and the lining hang separately. If one 'drops' a bit, you can easily adjust the bottom hem. When laying the lining on top of the curtain fabric I would make sure that the lining is in a little from the edge of the curtain fabric too so you can't see it at the sides when it's hanging. You would have to hem the sides separately too, first.

I don't think I would try and sandwich them together because of the different way the individual fabrics will 'drop' when they're hanging.

dflynn

I agree with suesew. I always worry about how the drapes look like from outside. I think the difference in the weights will hang uneven.