Go Back  Quiltingboard Forums > Main
New Quilter >

New Quilter

New Quilter

Old 11-23-2010, 10:41 AM
  #1  
Member
Thread Starter
 
Join Date: Nov 2010
Location: Rochester, New York
Posts: 93
Default

I am having difficulty with squared off finished block. Everything measures well until I attach the border to all 4 sides. Because I am a new quilter I expect that when I an stitching the pieces together they are not the same seam width. I have put a taped line to the seam width on my machine so I thought this would do the trick.
Quilt4Me is offline  
Old 11-23-2010, 10:52 AM
  #2  
Power Poster
 
erstan947's Avatar
 
Join Date: Feb 2010
Location: Louisiana
Posts: 12,166
Default

Don't give up. I had the same problem in the beginning. I now sew one or 2 threads less than a 1/4 inch. Practice helps hang in there!

Welcome from Louisiana!
erstan947 is offline  
Old 11-23-2010, 10:57 AM
  #3  
Senior Member
 
Join Date: Jun 2010
Location: Iowa
Posts: 666
Default

I've been making quilts for years and sometimes I still struggle with my seams! Did you square up each block before sewing together? If I do that it helps.
Janie Q is offline  
Old 11-23-2010, 10:58 AM
  #4  
Super Member
 
Join Date: Jun 2010
Location: Washington
Posts: 1,016
Default

This happens to me all the time. I just keep working on me seams. Glad you are here.
M.E.H. is offline  
Old 11-23-2010, 11:01 AM
  #5  
Power Poster
 
amma's Avatar
 
Join Date: Jul 2007
Location: Out searching for some sunshine :-)
Posts: 58,856
Default

Try sewing a bit slower, and concentrate more on how the fabric is feeding into the front of the presser foot, not up closer to the needle, until you get to the end of it :wink: :D:D:D
amma is offline  
Old 11-23-2010, 11:08 AM
  #6  
Super Member
 
Join Date: Oct 2010
Location: Iowa
Posts: 8,816
Default

Welcome from Iowa.
Murphy is offline  
Old 11-23-2010, 11:22 AM
  #7  
Super Member
 
deema's Avatar
 
Join Date: Aug 2010
Location: Ontario, Canada
Posts: 1,304
Default

Take it slow and easy, with your eye on the front of the foot where the fabric is feeding through, not where the needle is. I put a strip of bright blue painter's tape on mine, coming right down the front of my machine, I can focus on the fabric lining up more that way than close to the foot or needle. It has helped immensely.
deema is offline  
Old 11-23-2010, 11:24 AM
  #8  
Super Member
 
grammyp's Avatar
 
Join Date: Feb 2010
Location: Alabama
Posts: 2,474
Default

Hello and welcome from central Alabama. The tape should help. The secret is practice, practice, practice. There is also a 1/4 inch foot that may help you, but I found the tape on the machine bed was good.
grammyp is offline  
Old 11-23-2010, 11:34 AM
  #9  
Super Member
 
Magdalena's Avatar
 
Join Date: Aug 2010
Location: State of Grace
Posts: 1,833
Default

Hello and welcome from California! I noticed placing extra lighting by my foot helps a lot. Don't give up, even when I think I have it done right...I don't.
Magdalena is offline  
Old 11-23-2010, 11:42 AM
  #10  
Super Member
 
fleurdelisquilts.com's Avatar
 
Join Date: Jun 2010
Location: LA
Posts: 1,551
Default

The tape tip helped me quite a bit. Until I got it, though, I did things a little differently. I cut my border fabric just a bit larger (about 1/4 inch) than needed. After sewing the border on, I squared up the block using my rotary cutter and mat.

Let's say you need a finished 2 inch border. You'd cut it 2 1/2 inches. I cut it 2 3/4 inch before sewing. Make the seam and press.

Measure carefully from the seam to the edge of the border and cut so that you have a straight edge. Using the 2 inch example, you will cut so that the block will be 2 1/4 inch. (Remember you need that 1/4 for the next seam.) Anything over 2 1/4 gets cut off. Turn the block and place the new edge on a mat line close to your body (it's easier to see so you can line everything up). Again measure from the seam, making sure the ruler is straight with the mat and the seam. Anything over 2 1/4 inches gets trimmed. Turn the block again, measure, cut. One more time to get the final edge and you're done. Now the block should be perfectly square with neat straight edges, and your border is exactly what you need to continue on your way.
fleurdelisquilts.com is offline  
Related Topics

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter