Go Back  Quiltingboard Forums > Main
Old Singer... >

Old Singer...

Old Singer...

Old 11-12-2009, 10:49 PM
  #21  
Super Member
Thread Starter
 
Join Date: Aug 2007
Location: South Puget Sound, Wa. State
Posts: 2,462
Default

Billy,
Thanks so much for your reply...
I was looking on the web today and came across somethings about this machine...way too cool.
I am thinking that this has an Oscalating (sp?) hook vs. the rotary hook.
I do not know the difference, yet, and perhaps will pm you with some questions and photos...
I think this would be a wonderful thing for me to tinker and perhaps try and fix myself since it doesn't seem to be anything major...yet
Thanks again,
Kirsten
ScubaK is offline  
Old 11-13-2009, 06:34 AM
  #22  
Banned
 
Join Date: Oct 2009
Location: Bikini Bottom
Posts: 5,652
Default

Yes your machine has the Horizontal Osculating hook. The motion of the hook is forward 180 degrees (half a circle), then it goes back to the starting point in the other direction.

I do not know the difference, yet, and perhaps will pm you with some questions and photos..
Let me say this, I am far from an expert on vintage machines but what I have learned about them is from ongoing research, hours of studying manuals, and lots of hands on experience. I have never been the type that steers away from anything mechanical and I will gut a machine completely and put it back together without thinking twice!

Fortunately I have a friend Les who lives down under in Melbourne, that is a third generation sewing machine repairman. Sewing machine repair is second nature for him just like breathing. Needless to say he is my go to guy when I run into anything that stumps me. Especially when it comes to the machines in the late 60's and the 70's.

But feel free to ask any questions and hopefully I will have the answers for you.

Billy

Lostn51 is offline  
Old 11-13-2009, 03:18 PM
  #23  
Junior Member
 
gangles's Avatar
 
Join Date: Mar 2009
Location: White Oak Tx
Posts: 281
Default

I dont know how to PM either! but you got a beautiful machine. I recently purchased a 1938 model for $25.00 in the cabinet!! But I need a new foot control for it.
gangles is offline  
Old 11-13-2009, 03:29 PM
  #24  
Senior Member
 
kapatt's Avatar
 
Join Date: Aug 2008
Location: Washington state
Posts: 820
Default

You may already know what model you have but if you don't, here is a fun site where you can come close to figuring out the older models. I don't believe all of the models are there, but this site helps you to notice the difference between the models.
http://www.sandman-collectibles.com/...r-machines.htm
kapatt is offline  
Old 11-14-2009, 07:59 AM
  #25  
Member
 
Join Date: Nov 2008
Posts: 2
Default

Hi Kirsten,
I believe this is a Singer Class 66 sewing machine. It appears that everything is intact except for the throat plate which I think you can get on line. The bobbin can be purchased anywhere. It is a "singer class 66 bobbin and is relatively common. You just drop the bobbin in so that the thread when pulled causes the bobbin to rotate clockwise. You should be able to see a couple of little slots to pass the the thread though. It is a nice sewing machine. I have quite a collection of old Singers. I use my Singer 201 daily. It is a favorite and also uses the class 66 bobbin.

This is a drop in bobbin machine. It does not have the removable bobbin case that many machines have.

Agnes
ninjaquilter is offline  
Old 11-14-2009, 08:18 PM
  #26  
Member
 
kkgliss's Avatar
 
Join Date: Nov 2009
Location: Iowa
Posts: 20
Default

A person who you could contact is Deb Travis who deals in old machines. Contact her at: www.quiltersportable.com or [email protected]. I hope this is helpful. Good luck! :lol:
kkgliss is offline  
Old 11-16-2009, 05:33 PM
  #27  
Super Member
Thread Starter
 
Join Date: Aug 2007
Location: South Puget Sound, Wa. State
Posts: 2,462
Default

Well,
So I dinked around with that sewing machine last week. Couldn't get the hand wheel to turn.
It was like it was locked up or out of sync or who knows...
So I take it to my local sewing machine shop and tell 'em I need to have this looked at.
We put it up on the counter, plug it in, the person turns the handwheel after I HAD SAID it doesn't turn!!!!
Stepped on the foot petal and away it went.
Put some oil on some places, bought some bobbins and am now going to look for the threading instructions.
I did get it to sew...tension is bad due to my threading...
Kirsten
ScubaK is offline  
Old 11-16-2009, 05:41 PM
  #28  
Banned
 
Join Date: Oct 2009
Location: Bikini Bottom
Posts: 5,652
Default

http://www.singerco.com/accessories/manuals.html

Here is a link for a free manual it is the second one listed just click the download button and you have it. It will have the threading instructions in there.

See I told you it was something simple, it takes an act of God to knock one out of time so if it isnt working right it is almost always a quick fix. It is a shame they can not build machines as sturdy now.

Billy
Lostn51 is offline  
Old 11-17-2009, 07:42 AM
  #29  
Member
 
Gomeyer's Avatar
 
Join Date: Oct 2009
Location: Missoula Montana
Posts: 58
Default

Check for threads down in the bobbin case area..even one small piece can jam up the works. suz
Gomeyer is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
miriam
For Vintage & Antique Machine Enthusiasts
154
03-12-2014 07:43 AM
Buzzy Bee
For Vintage & Antique Machine Enthusiasts
2
07-21-2011 02:09 PM
DianaSwi
Main
4
02-15-2011 02:24 PM
acesgame
For Vintage & Antique Machine Enthusiasts
8
08-01-2010 06:14 PM
Boston1954
Main
7
08-28-2009 05:35 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter