Please Help Me Choose a New Ironing Board
#1
Hi all, I read through many of the old posts on ironing boards but have a question that I didn't see addressed.
A few months ago, I bought a Rowenta iron. It's working great so far and produces lots of steam. However, they recommend a mesh ironing board - the top over which the cover is places is wire mesh. My current ironing board is solid metal with holes punched through it every so often. I find that my ironing board cover retains lots of moisture and takes forever to dry.
So...I am planning to replace my 30-year old ironing board.
Now...my question: I only have room for one ironing board and am tempted to get a 15" wide one. However, I read on a blog/post somewhere that it now limits your ability to iron clothes. In particular, the poster mentioned pulling the hip area of pants over the board (like a free-arm). The ironing board was too large to allow this.
Thoughts? Thanks in advance.
Cathy
A few months ago, I bought a Rowenta iron. It's working great so far and produces lots of steam. However, they recommend a mesh ironing board - the top over which the cover is places is wire mesh. My current ironing board is solid metal with holes punched through it every so often. I find that my ironing board cover retains lots of moisture and takes forever to dry.
So...I am planning to replace my 30-year old ironing board.
Now...my question: I only have room for one ironing board and am tempted to get a 15" wide one. However, I read on a blog/post somewhere that it now limits your ability to iron clothes. In particular, the poster mentioned pulling the hip area of pants over the board (like a free-arm). The ironing board was too large to allow this.
Thoughts? Thanks in advance.
Cathy
#3
I haven't ever tried to iron pants (at least the leg parts) with the board inside the legs. I always press them flat from hemline up to the hip line so that there are creases front and back.
The last time I bought an ironing board, I bought the best one I could find. It adjusts from very low (iron sitting down) to way higher than I need it! How wonderful to get an ironing board up high enough for a change. It's 17" x 49". It's not mesh - it's got the diamond shaped holes punched in the top.
But, I replaced the cover with two layers of low-loft cotton batting and made a tight cover of two layers of cotton muslin. I never have any trouble with moisture in it - at least I don't think I do.
The huge OSB pressing board that I lay on top of the ironing board holds moisture in the batt and canvas cover, but not the ironing board, itself.
Get the sturdiest ironing board that you can - you spend a lot of time pressing and it's so much more pleasant when you aren't fighting one of those tippy little too-small boards. :)
And a sturdy ironing board will support a big plywood pressing surface so that you can press whole widths of fabric at once. :D
The last time I bought an ironing board, I bought the best one I could find. It adjusts from very low (iron sitting down) to way higher than I need it! How wonderful to get an ironing board up high enough for a change. It's 17" x 49". It's not mesh - it's got the diamond shaped holes punched in the top.
But, I replaced the cover with two layers of low-loft cotton batting and made a tight cover of two layers of cotton muslin. I never have any trouble with moisture in it - at least I don't think I do.
The huge OSB pressing board that I lay on top of the ironing board holds moisture in the batt and canvas cover, but not the ironing board, itself.
Get the sturdiest ironing board that you can - you spend a lot of time pressing and it's so much more pleasant when you aren't fighting one of those tippy little too-small boards. :)
And a sturdy ironing board will support a big plywood pressing surface so that you can press whole widths of fabric at once. :D
#4
Originally Posted by cmw0829
Hi all, I read through many of the old posts on ironing boards but have a question that I didn't see addressed.
A few months ago, I bought a Rowenta iron. It's working great so far and produces lots of steam. However, they recommend a mesh ironing board - the top over which the cover is places is wire mesh. My current ironing board is solid metal with holes punched through it every so often. I find that my ironing board cover retains lots of moisture and takes forever to dry.
So...I am planning to replace my 30-year old ironing board.
Now...my question: I only have room for one ironing board and am tempted to get a 15" wide one. However, I read on a blog/post somewhere that it now limits your ability to iron clothes. In particular, the poster mentioned pulling pants over the board (like a free-arm). It just wasn't large enough.
Thoughts? Thanks in advance.
Cathy
A few months ago, I bought a Rowenta iron. It's working great so far and produces lots of steam. However, they recommend a mesh ironing board - the top over which the cover is places is wire mesh. My current ironing board is solid metal with holes punched through it every so often. I find that my ironing board cover retains lots of moisture and takes forever to dry.
So...I am planning to replace my 30-year old ironing board.
Now...my question: I only have room for one ironing board and am tempted to get a 15" wide one. However, I read on a blog/post somewhere that it now limits your ability to iron clothes. In particular, the poster mentioned pulling pants over the board (like a free-arm). It just wasn't large enough.
Thoughts? Thanks in advance.
Cathy
#5
Oops, edited my post. The issue that the poster had with the 15" wide ironing board is that the pants wouldn't fit over the narrow end of the ironing board.
Thanks for the replies. I do iron my pants after washing, so maybe iron 3 to 4 pairs a week. Not sure if that is a lot. :) 17" wide? Wow! I would love that if I had the space.
Thanks for the replies. I do iron my pants after washing, so maybe iron 3 to 4 pairs a week. Not sure if that is a lot. :) 17" wide? Wow! I would love that if I had the space.
#7
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,659
One could get one of those little portable ironing boards to set on top of the "real" one.
I love my Big Board - but occasionally I'll get out the sleeve board for a tiny area. I've even went to using a dowel when I was pressing the seams of Barbie Doll clothes.
I love my Big Board - but occasionally I'll get out the sleeve board for a tiny area. I've even went to using a dowel when I was pressing the seams of Barbie Doll clothes.
#8
I use my Rowenta on a regular ironing board that I made a topper for out of plywood (24x 48) covered with batting and mylar that sits on top. It doesn't shift around because my husband used 1x2 strips to make a track for it to fit.
I haven't had any problems in using it these last 2 -3 yrs.
I love the larger space for pressing fabric after it's washed.
I haven't had any problems in using it these last 2 -3 yrs.
I love the larger space for pressing fabric after it's washed.
#10
Super Member
Join Date: Apr 2010
Location: Southern , Virginia
Posts: 1,518
My daughter got me the big board for Christmas and I love it !! Unfortunately it takes up just enough more room that I can't leave it up as it's too heavy to move around whens its open and i need a bigger sewing room !!!!!
Thread
Thread Starter
Forum
Replies
Last Post
Wildernessties
General Chit-Chat (non-quilting talk)
6
10-07-2013 06:37 PM
craftybear
Links and Resources
15
04-07-2013 02:59 AM
craftybear
Links and Resources
1
08-12-2011 06:51 PM
craftybear
Links and Resources
7
06-02-2011 04:39 PM
craftybear
Links and Resources
14
11-28-2010 09:07 AM