I am a hand quilter and was just wondering if there are other hand quilters out there and if so do you have a problem with needles. I use between quilting size 10, and go through at least two an hour. I don't know if it is the needles or that I am just to hard on the needle. Am I using the wrong needle or what?

Sue, how do you mean "go through"? Do they break or seem to get dull? I use mine for a very long time, more than one quilt, with no problems. In fact, I was just working on a quilt, and thinking I need to yank out a new needle....What kind of fabric are you using? I know some fabric is too tightly woven to make it quiltable especially by hand.
Ellen

How many stitches are you putting on the needle each time ? Too many will make your needle bend.

Hi Sue,

There are many of us hand quilters here. I am also unsure what you mean by go through needles. If you are bending and breaking needles that quickly that makes me think one of two things... you have the quilt in the hoop way too tauntly, this is of course assuming you use a hoop, or you aren't buying a very good quality needle.

I use a lap hoop and I load fairly loosely. When I lay my quilt over the inner hoop I make sure my fabric is fairly loose. Then I put on my outer hoop and before tightening it I run my fist around the entire perimeter of the hoop to give me a bit more slack. Then I tighten. If I lay my hoop down on the table I can easily touch the tables hard surface when laying my flat hand down in the middle.
For needles, I use a Roxanne number 11. It is as short as a #12 between but as thick as a #10 between needle. I usually load up about 7 to 8 stitches per needle full.
One brand of needles that bends and breaks on me easily is Richard Hemming & son. I won't buy those. And I definitely will not use clover brand, ugh. They bend easily and don't needle well at all, like they are dull not at all sharp. Usually I hand quilt with Hobbs 80/20 bat or quilters dream polyester. I have no trouble with batiks, even though they are tightly woven.

Should have made myself clearer! The needles bend pretty bad and to me rather easy. I use a Q snap quilt frame (floor model)and Dritz betweens.

Iam a hand quilter and have never had a problem with needles. The lady who taught our class 11 years ago used Roxanne 10 or 11. That is what I have always used. Have never broken one!

You can also have a bad batch of needles, where they all bend or break easily.

It sounds like you might be keeping the quilt too tight in your frame.

I am a hand quilter also and I have tried several brands of quilting needles/betweens. Some become dull very quickly, others you can use for weeks or even months! Unfortunately I don't know the Dritz needles, obviously they are not available here in Germany.
What you describe sounds to me like a problem of the way you have the quilt in your frame and how taught it is. Feline already mentioned that. Try to put your quilt in the frame more loosely, that might help. I quilt in a hoop on a stand and I put the quilt in exactly like feline described it.
Another reason could be the quilting method you use, how you guide your needle and how much pressure you put on it. Roxanne needles and also the John James brand are quite strong and they don't bend so quickly like others.
What kind of batting do you use? Some battings needles very easily, for others you need much more strength to needle them.

It could be your batting that is at fault. What brand of batting are you using?

Thank you all for your information. I usually pull the fabric really taut to quilt so that may very well be the problem. I always thought that was how you did it. I usually use Mountain Mist batting. I am going to invest in some better needles and see if that works better for me