You can get the it Dye Fixative on Amazon -- it qualifies for Prime shipping if you have that.
|
Originally Posted by Peepers
(Post 5453793)
I've always used vinegar and it's worked every time. I even made a red and white quilt with JoAnn's Country Classic solids and I've machine washed it since I've finished it and there is not one single spot of red on the white. I just fill put the fabric in the washing machine, dump in half a gallon on white vinegar, fill the machine with cold water just to cover the fabric and let it sit for at least an hour. I then empty out the water, and wash with laundry soap on hot. I throw in a piece of white fabric just to be sure and I've never had a color transfer to the white. I'll probably get flak for this, but, just saying, it has worked for me for years.
It is a chemical impossibility for vinegar (or salt) to prevent todays dyes from bleeding. You have simply been lucky, not used any bleeders, and gone to a lot of extra trouble. ETA: And what is this Quilting Article that is spreading VERY outdated information to our novice quilters? |
I stand by my post about vinegar! I soak all dark fabrics in vinegar before I prewash. Why would I prewash the fabric, only to risk it possibly fading before I soak it in vinegar? The "whole process" takes about 5 minutes of my actual time as I don't stand there and watch it soak for an hour. Unless you have tried vinegar and had it fail, you are spreading false information about vinegar and advocating dumping more chemicals into our already polluted water supply. I knew I would get flak about this, but, as I said, vinegar has NEVER failed me and I buy a lot of fabric at JoAnn's, WalMart, and Hobby Lobby. Again, I suugest you not knock vinegar unless you've tried it and had it fail. Geez!
|
How do you keep your water temperature at 140°?
Thanks! (:
Originally Posted by Peckish
(Post 5453926)
I soak the fabric in 140° F water, with Synthrapol added, overnight. This is what a lot of fabric dyers do.
|
I'm still wondering why we even need to have this discussion about commercially dyed fabrics!
Other than getting the excess dye rinsed out, why should we have to spend more money to finish the manufacturer's job? |
Originally Posted by Peepers
(Post 5454732)
... you are spreading false information about vinegar and advocating dumping more chemicals into our already polluted water supply.
http://www.pburch.net/dyeing/FAQ/settingdye.shtml http://www.pburch.net/dyeing/FAQ/lightfastness.shtml |
And I just googled over 400,000 sites that says it works, and that's a fact, too. Whatever, again, I'll keep using my vinegar as it's worked for over 50 years for me and y'all do what you want, but, please, stop responding to my posts.
|
Originally Posted by AtHomeSewing
(Post 5454902)
How do you keep your water temperature at 140°?
Thanks! (: |
If I was doing my "OWN" dying, I think taking all these extra steps would be fine and dandy.
In my opinion, if a commercially dyed fabric doesn't stop releasing dye after two or three rinses or washes, it's defective and should be returned to the store. (Unless there is a disclaimer on the end of the bolt - Madras plaids used to notorious for bleeding - but there was a statement to that effect on the end of the bolt. I don't know if they still are or not - ) |
I use Retayne for all my reds, blacks and blues. Let soak in the sink with super hot water then wash in hot water with color catchers. No bleeding on the color catchers when it comes out of the dryer.
|
All times are GMT -8. The time now is 11:50 AM. |