I have officially done it!! I have put the first machiine stitches into my first fully machine quilted quilt. Not as scary as I thought, but still, terrifying. Now, after working for one hour, I have a series of questions!

First: Is the free-motion/darning foot supposed to sit all the way down to the quilttop the way your regular presser foot does? Cuz mine doesn't, and it's making it difficult to move my hands when I need to shift the quilt.

Second: Why is my machine skipping stitches? See photo.

Third: I started tonight on the foundation(?) quilting, the in-the-ditch quilting that is supposed to be invisible and anchor everything down before I begin working in the blocks. Since my stitches are clearly NOT invisible since I still haven't managed to make a consistently straight stitch(again, see photo, #2)), when I begin the background free-motion quilting, can I or should I not quilt over the ditch stitches. I know you're not supposed to cross over your free-motion stitches,but does that apply to the foundation stitches?

Fourth: Any other hints? This quilt is for my bf's first baby, and of course I want it to be special, and perfect. I know, perfection doesn't exist beyond the first inch or two, but I still want it to be perfect.

I am looking forward to the tips for stitch in the ditch. I find that really hard. I think you are supposed to stay a little to the side not in the middle...but not sure.

I'm learning from your questions - can't wait for answers!

There are many experts here, I am not one, but I find using the walking foot for the straight stitching and the darning foot (which does not sit like your regular foot) for FMQ designs, ie. curves, loops, etc. Learning to use your hands and foot take lots of practice to get the stitches even, and well worth the effort. Try working on a practice piece of fabric layered with batting and backing fabric. Good Luck! Your quilt is lovely.

Your foot should not be resting on the fabric like the reg feet. It is not suppose to hold down your fabric.

Make sure your feed dog is down when you're using the darning foot and when you need to readjust your hands, make sure your needle is down. The stitches will get better the more you practice -- it's a matter of getting your foot pressure and hand movements coordinated and it takes practice. I also use a walking foot with the feed dogs up when I'm straight stitching.

For the skipped stitches, make sure everything is threaded correctly. Then make sure your tension is correct, lastly, make sure you are using the correct needle size. Remember that the quilt sandwich is much thicker than when piecing and that necessitates a different needle. There are needles specifically for quilting, but some folks use a topstitch needle. I am sure some of the folks on here can help more, but that is what came to mind.
As for stitching in the ditch, try a matching thread, and as Margie said, line up your presser foot so you are stitching just a little to the side of the seam. Go to You Tube search stitch in the ditch, and they are tons of videos to see how to do it. Good luck.

I don't consider myself to be an "expert", but I'm a couple of jumps ahead of you on the learning curve. I'm working on "real" FMQ quilt #5 now and in the past year I've worked through all of the troubles that you are experiencing!

Let's see if I can help you out with some of my experiences.... (In addition to all the good tips above.)

No, the free-motion/darning foot is not supposed to sit all the way down like a normal foot does. It only really presses on the quilt as the actually stitch is being made; as your needle goes down, the presser foot also goes down a bit, and when the needle comes up, so does the presser foot. Be sure to put your needle in the "down" position every time you stop. That will allow you to rearrange the quilt without loosing your place so to speak.
Probably because the rate at which you are moving the quilt is not consistent. When you speed up the motion of the quilt suddenly, stitches will skip. (I've also had this happen when I am using some "bad" i.e. cheap and nasty thread.)

Here's my "secret" for stitch in the ditch: I use my walking foot if at all possible, instead of FMQ! I try to plan m SID so that I can do straight, uninterupted lines all the way across the quilt and not have to make turns.

I always try out my quilting on a practice piece right before I start on the real thing to make sure everything is in order.
Because you are putting your heart into this quilt~It WILL be special and perfect!

Hon, I would not use your darning foot for SID. That foot is for FMQ and until you get used to FMQ you will get skips like that, and loose control over the stitching.

FMQ is where you drop your feed dogs and move your fabric all around underneath your needle. We do this when we want to make circles, feathers and other shapes.

SID is following your seamlines

Cross hatching is usually stitching diagonal lines across your quilt.

You can cross your stitching lines when you SID :D:D:D

It is NOT a hard and fast rule that you can't cross your stitching lines when you FMQ either :wink:

If you don't have a walking foot, use your basic sewing foot for doing SID :wink: I think you will be much happier with your stitching. You will have MUCH more control over where your stitching ends up :D:D:D

If you don't have a walking foot, it is a great investment :D:D:D

I find stitch-in-the-ditch really hard to do. On the few occasions when I attempt it, I use a walking foot. I would find it impossible to do stitch-in-the-ditch with a darning foot.

The darning foot does ride higher than other feet, to allow movement of the quilt. It would be used for free motion quilting.

It sounds as if you may be using a darning foot to do stitch-in-the ditch. If so, that could be your biggest problem. There are accomplished quilters who can do SID that way, but it's not for a beginner.