Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   Main (https://www.quiltingboard.com/main-f1/)
-   -   Need help deciding on a sewing table (https://www.quiltingboard.com/main-f1/need-help-deciding-sewing-table-t169074.html)

3NorwichTerr 11-19-2011 07:41 PM

Need help deciding on a sewing table
 
My birthday is in December so I usually pick a gift for my DH to buy me for both together. This year I told him I'd like a sewing table. My machine sits on a desk now and it is too high to be comfortable or to use the leg thingy to lift the sewing foot. I'd like something with some storage in it. Most of what I've seen so far doesn't have any drawers.

How important is the adjustable height? Seems like it would be pretty cool for free motion quilting. Any advice you can give, including specific recommendations would be appreciated. I would like to spend less than you would on a used car. :-)

Joy.lynn 11-19-2011 08:31 PM

I have a Sauder sewing table on order(internet) from Walmart($99 shipped to a store). I ordered it because of have 2 Sauder bookcases that are VERY nice.

feffertim 11-19-2011 09:21 PM

I recently came across this table and several people on my Janome blog told me they have this table and love it. I am seriously considering it after Christmas because I also need an adjustable table to save my neck. They make tables specifically for all makes of machines and they are quite inexpensive. No storage tho. http://sewperfecttables.com/sewing-tables.shtml

JulieR 11-19-2011 09:27 PM

I bought a beautiful, large walnut table from an antique store for my sewing (and cutting) table. I bought an office-type chair so that depending on what I need to do I can simply raise or lower the chair.

Denise S 11-19-2011 09:36 PM

The sew perfect table, http://sewperfecttable.com/sewing-tables.shtml, is what I think I am going to get for my ne Juki 2010. I have done a lot of research on this board. There are a variety of good tables to consider....the sewezi table,,http://www.seweziusa.com/ epic furniture, http://epicofficefurniture.com/produ...ducts_id=37901, the gidget 2 http://www.connectingthreads.com/cfT...cfm?id=Gidget2

The sewezi and the gidget are both portable. The sewperfecttable and the one from Epic furniture are not portable.

The sewperfecttable is height adjustable, which for me is very important, because I am short and have always sewed at too high a level. Since I have a new machine, I want to get a table so I am comfortable. There are size options with this table as far as surface area, and there is also a front extension and rear extension you could purchase to add to your sewing area. Think about what you want in a table and what is most important to you. Search "sewing table" or even the specific names I listed, on this board and you will read a lot about these various tables, and you can check the prices also. I think the gidget is the least expensive, the other 3 are in a similar price range, 250-300.

You can also adjust or tweek or height with an adjustable office chair. I know some people whose sewing surface is at a very high level and they use a high adjustable drafting type chair. I, being short, prefer to be ground level, I want my feet flat on the floor, so it is easier for pedal reach, knee lever reach, etc. I don't want to be coming down off a chair.

miss_ticky2 11-19-2011 10:08 PM

Hi

This doesn't have a lot of storage that you mentioned you wanted but, I use a normal timber dining table that my hubby modified for me so that my machine sits in a well and is flush with the table. It was too high just sitting on top of the table but I find this to be ideal for me. I have an adjustable office chair that I can raise or lower as well if I need any small adjustment.

The machine does have a knee lever to raise the presser foot and these photos don't show the knee lever in place because he hadn't drilled the hole at that stage. But he has drilled a hole in the front edge of the table since and it works just fine.

http://www.quiltingboard.com/picture...on-t76568.html

sewbeadit 11-19-2011 11:30 PM

Janice, your husband did a great job on the table, it looks really nice and sturdy too.

QuiltnNan 11-20-2011 12:40 AM


Originally Posted by JulieR (Post 4700417)
I bought a beautiful, large walnut table from an antique store for my sewing (and cutting) table. I bought an office-type chair so that depending on what I need to do I can simply raise or lower the chair.

yes, as far as height goes, i'm more about the chair than the table. i have one home-made table that is much too low when using a standard chair, but the office chair lowers to make the table just fine.

familyfun 11-20-2011 03:51 AM


Originally Posted by Joy.lynn (Post 4700271)
I have a Sauder sewing table on order(internet) from Walmart($99 shipped to a store). I ordered it because of have 2 Sauder bookcases that are VERY nice.

I have this same table and I love all the storage in it.. The only thing I think it is lacking is width.. I would love to have a wider table. I have had it for about 6 years and have never had a bit of trouble It is very sturdy

jitkaau 11-20-2011 04:14 AM

Try one of the computer tables that wind up and down.


All times are GMT -8. The time now is 01:03 AM.