Go Back  Quiltingboard Forums >
  • Main
  • Problem with hand quilting in hoop - tiddlywinking needle. >
  • Problem with hand quilting in hoop - tiddlywinking needle.

  • Problem with hand quilting in hoop - tiddlywinking needle.

    Thread Tools
     
    Old 01-02-2012, 09:14 AM
      #1  
    Junior Member
    Thread Starter
     
    Join Date: Oct 2008
    Location: Cooperstown, NY
    Posts: 220
    Default Problem with hand quilting in hoop - tiddlywinking needle.

    So...I finally finished the wall hanging for my quilt club exchange (only 2 months late but it's for my friend and she understands). I started hand quilting in my usual way (on my lap, squashing up the fabric in one hand and running stitch with the other), but I was reading that it will come out better if I use a hoop. So my local quilt store lady very kindly loaned me her own q-snap frame and last night I tried for hours to quilt it.

    I had the book "That Perfect Stitch" open beside me and was following the directions in it. On each first stitch, when I tried to bring the point of the needle up to the top, it would jump off the quilt (I was holding the end with my thimble finger as instructed) just like a tiddlywink. The only way that it wouldn't was if I took a really big stitch. I don't think the quilt was too tight in the frame - there is a lot of hand applique and embroidery in it and I couldn't make it tight. After 2 hours, I had only done about 2 inches of quilting.

    I ended up taking it out of the frame and going back to my old method.

    What was I doing wrong? And how important is it to use a frame. Is my squished up fabric, no hoop method, so bad? It is not a huge quilt, only a wall hanging. Has anyone else ever had this problem?

    I would REALLY appreciate any help or opinions! Thanks, everyone, in advance.

    Lorli
    lorli is offline  
    Old 01-02-2012, 09:28 AM
      #2  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    It sounds to me as if the quilt was too tight in the frame. The purpose of the frame is simply to prevent fabric from puckering. In terms of looseness for a hand quilting frame, you want at least a fistful of "give" in the center. That is, the center should be able to move about 5 inches below to 5 inches above the frame. It shouldn't look like a drum; it should sag at least a little in the middle.
    Prism99 is offline  
    Old 01-02-2012, 09:31 AM
      #3  
    Junior Member
    Thread Starter
     
    Join Date: Oct 2008
    Location: Cooperstown, NY
    Posts: 220
    Default

    Thank you, I guess it was too tight after all (the LQS lady showed me how to put it in, but maybe she didn't account for the heavy applique). I will try it again.

    I do wonder if there is much difference between quilts made with a hoop/frame and those made on the lap.
    lorli is offline  
    Old 01-02-2012, 09:33 AM
      #4  
    Junior Member
    Thread Starter
     
    Join Date: Oct 2008
    Location: Cooperstown, NY
    Posts: 220
    Default

    P.S. It could move only about 2 inches in the center. I forgot to say.
    lorli is offline  
    Old 01-02-2012, 09:37 AM
      #5  
    Super Member
     
    Join Date: Mar 2011
    Location: Central NJ
    Posts: 5,571
    Default

    Well, you've gotten good advice here and your LQS as to how tight to have your quilt in the hoop. There's nothing wrong with not using a hoop. I do it both ways depending on how large/heavy the quilt is. I like using a hoop if for no other reason than an easy way to find where I left off stitching. And you can still do your 'running' stitch using the hoop. Find the rhythm that works for you. As long as your stitches are consistent size doesn't matter. They will get smaller over time.
    NJ Quilter is offline  
    Old 01-02-2012, 09:39 AM
      #6  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    If you can do nice hand quilting without a hoop, there's really no big advantage to using a frame or hoop. I have tried quilting without a hoop, but I found the bunching to be hard on my hands, and my stitches were not even (especially underneath). I like using a lap hoop (mine swivels on a ball and is very easy to adjust to any angle and direction. By hooping very loosely as I described, it's a little similar to quilting without a hoop in that it's still easy to manipulate the fabric layers onto the needle.
    Prism99 is offline  
    Old 01-02-2012, 02:58 PM
      #7  
    Senior Member
     
    Join Date: Apr 2010
    Location: Lived in San Diego now retired in Eagar, AZ.
    Posts: 887
    Default

    Don't be afraid to quilt without a hoop, lots of people do it (I'm one..) it only requires close basting 4" squares, and working from the middle outward... and if you have started quilting this do NOT change methods in the middle.... seriously... this is quite common...
    deemail is offline  
    Old 01-02-2012, 03:18 PM
      #8  
    Super Member
     
    Join Date: Oct 2011
    Location: dallas tx.
    Posts: 5,172
    Default

    If you are using the plastic pipe frame you must have give in thecenter. You will never get that needle back up if it is too tight. Use that finger underneath to push it back up. You can do it.
    barny is offline  
    Old 01-02-2012, 03:48 PM
      #9  
    Super Member
     
    Join Date: Mar 2011
    Location: Topeka, KS
    Posts: 3,813
    Default

    I have only hand quilted two quilts so I certainly do not have the expertise that others have. I used the PVC type of rectangular hoop and started in the middle of the quilt. It was comfortable for me to quilt that way and I was sure I wouldn't shift the batting and backing while I was quilting. I had basted and pinned the quilt but I didn't think what I did stabilized the sandwich enough. I tried machine quilting one of the quilts but ended up taking all that out because the backing bunched up a lot.
    If you get a satisfactory product not using a hoop, I say do what you like. I am sure your quilts are really beautiful and the sandwich is fine. If I get more experience, maybe I could do it that way, also.
    serenitybygrace is offline  
    Old 01-02-2012, 04:32 PM
      #10  
    Senior Member
     
    Join Date: Dec 2010
    Posts: 605
    Default

    I have been handquilting for many years and prefer to use a hoop on a stand, however, if I am working on a very small project I squish it up and quilt without a hoop. My advice to you: use whatever method you are comfortable with. Handquilting is handquilting no matter how it is accomplished. Nice to meet another handquilter. Good luck with your project.
    scraphq is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    vlposey
    Main
    5
    10-23-2010 06:44 AM
    Sandra-P
    Main
    7
    07-22-2010 08:19 AM
    Simple Pleasure
    Main
    37
    05-09-2010 06:41 AM
    dcurvey
    Main
    8
    08-13-2007 09:07 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter