Go Back  Quiltingboard Forums > Main
quilt clamps >

quilt clamps

quilt clamps

Old 10-01-2013, 02:36 PM
  #1  
Senior Member
Thread Starter
 
evelyn5269's Avatar
 
Join Date: Aug 2011
Location: Spokane Washington
Posts: 309
Default quilt clamps

I am making a queen size quilt and when I get ready to machine quilt it I will really need to roll it tight to get in the throat of my machine. I bought the red clamps from a fabric store. Not even close to tight. Do any of you have any solutions. Home "remedies" Most of my quilts have been twin to double and this one will be much bigger. I have hear bicycle ankle clamps are pretty good but have never seen them on a quilt before.

Thanks for the help.
Evelyn in Sequim
evelyn5269 is offline  
Old 10-01-2013, 02:44 PM
  #2  
Power Poster
 
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,680
Default

Many of us just let it puddle and forget about the roll!
QuiltE is offline  
Old 10-01-2013, 02:54 PM
  #3  
Senior Member
Thread Starter
 
evelyn5269's Avatar
 
Join Date: Aug 2011
Location: Spokane Washington
Posts: 309
Default

how do you get all the fabric into your machine to free motion quilt it with all that fabric. I could not do it on the last double I did. It was a nightmare and shows it.
evelyn5269 is offline  
Old 10-01-2013, 03:01 PM
  #4  
Super Member
 
Join Date: Oct 2010
Location: Nebraska
Posts: 3,252
Default

This is what I do, too. Puddle, no rolling. A roll is just to heavy and hard to handle. I have done queen size on my DSM, Pfaff. Look on you-tube for instructions for puddleing, Leah Day, in particular.
Originally Posted by QuiltE View Post
Many of us just let it puddle and forget about the roll!
suern3 is offline  
Old 10-01-2013, 03:06 PM
  #5  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,445
Default

When I do a good sized quilt, I don't worry about getting the whole thing through the harp. I picture the quilt in quarters. The top right corner is quilted first, quilting from the center out. The rest of the quilt is puddled on the table around my machine on the left side and in my lap. Once the top quarter is done, I turn the quilt one quarter (counter clockwise) and work on the next quarter. Don't worry about the rest of the quilt and just work on what is in the harp.
Rolling or packaging the quilt sounds good in theory but it just makes it heavier and unwieldy to more.
Tartan is offline  
Old 10-01-2013, 03:30 PM
  #6  
Senior Member
Thread Starter
 
evelyn5269's Avatar
 
Join Date: Aug 2011
Location: Spokane Washington
Posts: 309
Default

Thank you and that all makes good sense. I have a very small area since I just have the machine cabinet and no way for a table but I really would like to find a link to the Leah Day or anybody. When I google puddling nothing comes up for me. I would like to watch to see how I can adapt in my small space. I have machine pulled away from the wall so it can go down behind. I may go to goodwill and try to find a table that would be flush with the machine on left side but can't be very wide or I could not sit at it lol
evelyn5269 is offline  
Old 10-01-2013, 03:39 PM
  #7  
Power Poster
 
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,680
Default

Yes, chances are that google does not give you info about quilt puddles! All we mean is that we do not roll it up, and just bring the quilt in under our needle/foot and go at it! And then let the rest fall where it does, on the table or into our laps. Thus puddling!

Your quilt draping off your table will be heavy ... and cause you problems when FMQ. You would be better to let it bunch up on top of the table you are working on than for it to fall off. Likewise it draping off the table into your lap can cause some resistance and prevent it moving easy for you as you work.

Leah Day has videos for you to watch ... and of course, many more other sites have videos.

What is helpful to one person, makes little sense to the other!!
(ask me how I know that one!)
... so Let Google be your friend to find what gives you the ideas and info you want and need.
QuiltE is offline  
Old 10-01-2013, 04:04 PM
  #8  
Power Poster
 
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Default

If you had that much difficulty with a double, I would definitely split the batting for the queen size quilt. This will make it much easier to fit under the throat of the machine.

Basically what you do is layer the backing and batting as usual, but then cut the batting into a middle piece and two side pieces. Layer the top on this. Quilt the middle section first, leaving about 6" on each side so you can re-attach the batting later. Reattach batting using iron-on batting tape or zigzagging the edges together (by machine or by hand) and finish quilting the sides. This results in much less bulk needing to be crammed under the machine throat while you are quilting the middle. Be aware that there are some tips that make this easier. Search here, or check out Marti Michell's book on the topic. For example, you want to make sure you create registration marks on the batting when you cut it, so that you can re-attach the batting exactly as it was. You also want to be sure and label the top of each piece. The end result is that no one can tell you quilted in sections!

Oh, and I tried the bicycle clips years ago. Useless. If there is too much quilt to "puddle" or accordion pleat under the arm of the machine, it's much better to split the batting so you can quilt in sections.

Here's a link to Marti Michel's book:
http://www.amazon.com/Marti-Michell-...dp/B0002J5GX0/
I don't have it. I learned the sectioning method above from one of Debra Wagner's books.
Prism99 is offline  
Old 10-01-2013, 04:09 PM
  #9  
Super Member
 
Join Date: Jun 2009
Location: Bluebell
Posts: 4,291
Default

Yep, puddle! Only way I do it. Works great! I got bicycle ankle clamps I can send you. Not worth it in my opinion.

I have puddled queen size quilts. I put a table behind my machine and one to the side to support it. works great. I am doing a King size this winter.

Last edited by deedum; 10-01-2013 at 04:16 PM.
deedum is offline  
Old 10-01-2013, 04:16 PM
  #10  
Super Member
 
Join Date: Oct 2011
Location: dallas tx.
Posts: 5,172
Default

Do you have an ironing board to use to hold part of the quilt.
barny is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
evelyn5269
Main
13
11-22-2017 10:49 AM
lvaughan
Links and Resources
7
06-18-2011 06:52 AM
fabric whisperer
Main
17
01-08-2011 06:04 PM
sandiphi
Main
6
07-13-2009 12:48 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter