Go Back  Quiltingboard Forums > Main
Quilt seams help! >

Quilt seams help!

Quilt seams help!

Old 02-07-2011, 05:10 AM
  #1  
Member
Thread Starter
 
LJSews4Fun's Avatar
 
Join Date: Jul 2010
Location: Brick, NJ
Posts: 35
Default

Hello All,
I need help in explaining what I need to increase my cuts for a 1/2 in seams.
You see, Every quilt I have made in the last 2 years (using the 1/4 inch seam allowance has become unstitched.

I have used 1/2 inch seams before I joined any quilting groups and learned that Quilts should be made using 1/4 inch seams.

When I complete my quilt, I tack it every few inches to keep it together.

If I am making a 4 inch block using half square triangles do I increase my cuts to be 1/2 inch larger than the instructions call for?

Can someone please shed some light?
Thanks in advance, Laura A in Brick, NJ
LJSews4Fun is offline  
Old 02-07-2011, 05:13 AM
  #2  
MTS
Banned
 
Join Date: Nov 2010
Posts: 4,134
Default

Perhaps your stitch length is too long. Did you try shortening that to see if it creates a stronger seam?
Also, what is the quality of the fabric you're using? If it's very thin, with a light weave, that could be part of the problem.

I'd be really surprised if increasing the seam allowance size (and therefore EVERY single measurement for everything you're going to sew quiltwise) is the ONLY solution.
MTS is offline  
Old 02-07-2011, 05:23 AM
  #3  
Senior Member
 
Join Date: Oct 2010
Posts: 647
Default

like mts said, you may need to shorten your stitch length. also try backstiching the beginning and end of each seam. That said, If your piece is to finish at 4 inches with a quarter inch seam you add a half inch (2 times 1/4). If you want to use half inch seams you would add 1 inch (2 times 1/2). When you increase the seam depth you add extra weight and bulk to your quilt. this will make it more difficult to hand quilt, and could cause problems even machine quilting.
Kat Sews is offline  
Old 02-07-2011, 05:29 AM
  #4  
Banned
 
Join Date: Mar 2010
Location: Sturbridge, Ma
Posts: 3,992
Default

go back and try to discover why your seams are coming apart. I don't believe making 1/2"{ seams is the solution. You will have real problems when putting different shapes together However, If I were doing it I would draw the finished size of the shapes on graf paper and then add the seam allowance and then measure to determine cutting. as long ss you are making squares and rectangles there should be no problem. the problem is when doing triangles and diamonds.
Holice is offline  
Old 02-07-2011, 05:30 AM
  #5  
Banned
 
Join Date: Mar 2010
Location: Sturbridge, Ma
Posts: 3,992
Default

on another note. If they don't hold at 1/4" they won't hold at 1/2" Sounds like it is your stitch length or the quality of the stitching.
Holice is offline  
Old 02-07-2011, 05:46 AM
  #6  
Super Member
 
Join Date: Jan 2011
Location: in retirement
Posts: 1,513
Default

Agree with everyone above, the time I use 1/2"is. On flannel.
gal288 is offline  
Old 02-07-2011, 06:00 AM
  #7  
Super Member
 
Join Date: Aug 2010
Location: Piedmont Virginia in the Foothills of the Blue Ridge Mtns.
Posts: 8,562
Default

Seams coming undone?

Before enlarging your seam allowance, check:
1. stitch length, make it shorter

2. tension is off on your machine stitch

3. thread quality, older thread often weakens especially if exposed to light and air

4. fabric easily frays (not quality100% cotton)

5. quilt is not quilted close enough together when finished, use the width-of-your-hand rule

Jan in VA
Jan in VA is offline  
Old 02-07-2011, 06:03 AM
  #8  
Super Member
 
Join Date: Mar 2010
Location: Anchorage, AK
Posts: 1,392
Default

how old is the thread you're using? IF it breaks easily by hand, it's not good to use for stitching. Also, what is the weave of the fabric you're using? Loosely woven fabrics may well fray out if only a quarter inch seam is used. Tighter weaves should hold stitching with quarter inch.
ktbb is offline  
Old 02-07-2011, 06:04 AM
  #9  
Super Member
 
sewwhat85's Avatar
 
Join Date: Nov 2010
Location: missouri
Posts: 6,311
Default

i also agree with finding the problem But to answer the question i think if you add 1/2 inch to all measurements that should give you the extra for seam allowance exmpl 2 inch square would be cut 2 1/2
sewwhat85 is offline  
Old 02-07-2011, 06:48 AM
  #10  
Super Member
 
pumpkinpatchquilter's Avatar
 
Join Date: Jan 2011
Location: NE Ohio
Posts: 1,384
Default

Another thought is, are you chain piecing? If you are snipping each time you add a piece of fabric or not starting from the very beginning possibly with leaders and enders you could be weakening your pieces.

Checking your stitch length sounds like a good idea, and also when it comes time to quilt, dense quilting will help to strengthen your quilts.
pumpkinpatchquilter is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
1
05-03-2011 08:49 AM
craftybear
Links and Resources
9
01-05-2011 01:10 PM
Hunnybunny
Main
43
03-06-2010 11:17 AM
ArtquilterNEWWAYtoQUILT
Main
16
12-11-2007 04:00 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter