Go Back  Quiltingboard Forums > Main
Straight of grain >

Straight of grain

Straight of grain

Old 03-18-2011, 08:30 PM
  #1  
Super Member
Thread Starter
 
laalaaquilter's Avatar
 
Join Date: Jan 2011
Location: Woodstock, GA USA
Posts: 1,250
Default

Why should I care if the fabric is straight of grain? I've been reading the 'torn vs cut' thread for the pros and cons of that and it all seems to come back to getting the fabric straight on the grain but no one has explained why it needs to be straight when I'm going to cut it a million ways and sew it five ways from Sunday.
laalaaquilter is offline  
Old 03-18-2011, 08:32 PM
  #2  
Power Poster
 
Join Date: Oct 2009
Location: Idaho
Posts: 11,375
Default

I have never worried about it, but I am interested to hear everyone's opinion.
Sadiemae is offline  
Old 03-18-2011, 08:43 PM
  #3  
Super Member
 
Join Date: Nov 2010
Location: Mabank, Texas
Posts: 8,780
Default

I was told that it didn't matter as long as I had my seams stright and was careful when I was pressing the fabric so I didn't streatch it out of shape. Also, I was told to alternate the directions I sewed when sewing strips so they would not bow. I sure someone with more quilting experience can give you better advise.
BETTY62 is offline  
Old 03-19-2011, 01:24 AM
  #4  
Power Poster
 
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
Default

if it is not straight (on-grain) it is bias...and very stretchy...
your edges will lie flat if your pieces are cut straight. if you cut off grain your pieces easily stretch out of shape. also if you fabric is not folded on the straight grain and you cut a strip you get those little V's in your strip at the fold....patterns (including clothing and other sewing) often have a line/arrow showing which direction the pattern piece should be placed on the fabric ensuring it is situated correctly (on-grain) things do not (hang/drape) correctly if cut incorrectly
if you want your borders straight, if you want your quilt to be square, if you want it to drape evenly...it is important to cut correctly--on grain
ckcowl is offline  
Old 03-19-2011, 01:27 AM
  #5  
Power Poster
 
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
Default

who ever told you that...has not had much experience sewing. i was taught the importance of paying attention to grain when i was 8 in 4-H...that has not changed, and it does not matter if it's quilts or clothing...grain line is important if you want your finished project to hang/drape straight/square.

Originally Posted by BETTY62
I was told that it didn't matter as long as I had my seams stright and was careful when I was pressing the fabric so I didn't streatch it out of shape. Also, I was told to alternate the directions I sewed when sewing strips so they would not bow. I sure someone with more quilting experience can give you better advise.
ckcowl is offline  
Old 03-19-2011, 04:54 AM
  #6  
Senior Member
 
CompulsiveQuilter's Avatar
 
Join Date: Mar 2010
Location: Knoxville, TN
Posts: 733
Default

??? So to make sure it's straight on grain ... before cutting strips you would tear off a bit and line up the two sides and re-fold the yardage? Is that right?
CompulsiveQuilter is offline  
Old 03-19-2011, 05:22 AM
  #7  
Super Member
 
Favorite Fabrics's Avatar
 
Join Date: May 2009
Location: Orchard Park, NY (near Buffalo, which is near Niagara Falls)
Posts: 3,884
Default

Originally Posted by laalaaquilter
Why should I care if the fabric is straight of grain? I've been reading the 'torn vs cut' thread for the pros and cons of that and it all seems to come back to getting the fabric straight on the grain but no one has explained why it needs to be straight when I'm going to cut it a million ways and sew it five ways from Sunday.
It's less of an issue when you are cutting the fabric into small pieces.

It is a really big issue if it's backing fabric. Your quilt top will be rectangular... and you don't want to pair that with a piece of backing fabric that is a parallelogram or diamond-shaped.
Favorite Fabrics is offline  
Old 03-19-2011, 08:25 AM
  #8  
Power Poster
 
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Default

Originally Posted by CompulsiveQuilter
??? So to make sure it's straight on grain ... before cutting strips you would tear off a bit and line up the two sides and re-fold the yardage? Is that right?
I don't like tearing fabric. It leaves microscopic damage up to 2 inches from the edge of the tear. This is especially true when tearing cross-grain (across the width of the fabric), as would be done in a fabric shop. Tearing along the straight-grain does less damage to the fabric.

For quilting purposes, it is not critical to always be exactly on-grain to the thread. It's more important to be close to on-grain for piecing. For example, you want the edges of your quilt top to be on-grain so they don't stretch out of shape from handling during sandwiching, quilting and binding. Bias edges must be handled very carefully to avoid distortions. For cutting out strips and pieces, it's enough to be close to on-grain; it doesn't have to be perfect!

With garments, grain is extremely important in order for fabrics to drape properly over the body. Quilt tops that are made out of many small pieces of fabric are going to have grain lines going every which way. Keeping strips and pieces cut close to grainlines helps ensure piecing accuracy so all pieces fit together in the end.

Edit: I would add that most quilters do not tear fabric to determine straight-of-grain. It's enough to "eyeball" it by lining up selvedges. Where we need to be very precise is with the cutting angles. For example, once a fabric is folded, a cut needs to be exactly 90 degrees from the fold (not the selvedges!) in order to have a straight cut when the fabric is unfolded. The cause of the dreaded "V" cut in strips has nothing to do with grainline, but everything to do with whether the ruler was positioned exactly 90 degrees from the fold line.
Prism99 is offline  
Old 03-19-2011, 08:32 AM
  #9  
Super Member
 
Join Date: Oct 2010
Location: Fox Valley Wisconsin
Posts: 1,920
Default

For patchwork, as long as you are close to grain, piecing will usually go well enough. For setting pieces, sashing and borders, grain is much more important. For best results, borders should be cut lengthwise for quilts. Fabric that is cut too far off of grain becomes much more stretchy, and can result in quilts that don't lay flat.
patchsamkim is offline  
Old 03-19-2011, 08:38 AM
  #10  
Super Member
 
IrelandDragonQuilting's Avatar
 
Join Date: Jan 2011
Location: Limbo
Posts: 1,953
Default

Shouldn't of opened this one, my head is spinning! hehehe
IrelandDragonQuilting is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
heron
Main
9
08-24-2018 08:30 AM
joyce888
Main
15
05-28-2012 04:32 PM
craftybear
Links and Resources
2
08-27-2011 11:58 AM
bebe
Links and Resources
0
07-22-2008 07:05 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter