A suggestion for Marking Cross Hatching
#1
Banned
Thread Starter
Join Date: Mar 2010
Location: Sturbridge, Ma
Posts: 3,992
I can never get the lines on cross hatching - either square or diamond- to end up correct and even when I use the guide on the walking foot or pressure foot. So I discovered to mark or dot all around the area at 1" intervals or whatever measurement you want and then with long ruler to connect the dots. This gives me more even lines and the hatching ends up as squares or diamonds. I rip too much out when I don't do this. A 1" interval will produce about a 3/4" square. 2" will give little over 1.5" square etc.
#2
Thanks for the tip, and I'll try this the next time I do it. On the last one I did where the hatching went around the whole thing I had to cheat every now and then to get everything to join up. What an ordeal, and for some reason I'm doing another that is going to give me the same headache.
#4
Power Poster
Join Date: Jun 2011
Location: Southern California
Posts: 19,127
GREAT TIP !!! I always used a HERA marker by Clover which puts an indentation that is easy to see when you start machine quilting, The most important thing with any marking is you want to keep referring to your orginal center line to make sure you stay consistent with that line. It is so easy to slowly merge off that line and then discover that your lines are no longer accurate and trust me, it WILL SHOW !!! :lol:
#7
Super Member
Join Date: Mar 2010
Location: Ridgefield WA
Posts: 7,765
I draw one line in the middle somewhere, then take a 6 x 24" ruler and draw lines 6" on either side. Then I draw the lines at 5, 4, 3... well, like that. Helps keep the 6"ers stay parallel to the first line. If it's a big quilt, I keep adding 6"ers then in-betweens or make marks and lines at 12" and so on.
#9
Super Member
Join Date: Dec 2010
Location: Norfolk, VA
Posts: 5,397
I just used a ruler and drew lines. I went diagonaly since the eye doesn't travel that way and you see less mistakes if the lines are a little crooked. Our eyes normally look up and down and left to right so this is where your mistakes show up. I then start sewing in the middle working my way out and around. I also use a walking foot; makes a big difference and spray baste
Thread
Thread Starter
Forum
Replies
Last Post