Go Back  Quiltingboard Forums > Main
Embroidery machine for overall design quilting >

Embroidery machine for overall design quilting

Embroidery machine for overall design quilting

Old 04-05-2017, 10:59 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Nov 2010
Posts: 109
Default Embroidery machine for overall design quilting

I'm considering purchasing an embroidery machine strictly for quilting - simple, edge to edge (overall / panto type designs) for baby to lap/twin size quilts. Looking for recommendations (or cautions) on machines with a large throat space, large hoop size and a small learning curve!!
copehome is offline  
Old 04-05-2017, 02:56 PM
  #2  
Gay
Super Member
 
Join Date: May 2012
Location: S.E. Queensland, Australia
Posts: 1,448
Default

I wouldn't look at any of the cheaper machines, as they mostly only have a 4 or 5" embroidery field, and once you're used to quilting with it you will invariably become more adventurous and want to do 'bigger and better' things. So I think you should look at the bigger machines. You will want to quilt square blocks as well so will want a larger embroidery area, at least 6 x 6'.

I have Brother machines, and a Pfaff, which were top of the range at one time. Have always found the Brothers so user-friendly - the Pfaff just sits waiting, as I am self-taught and this one takes so much time to work out, and then later I forget what I did. However, all machines except one Brother were bought pre-loved for a third of the new price, and have not had problems with any. You could try your closest machine shops, they will often have or know of someone selling a machine to upgrade.
Gay is offline  
Old 04-05-2017, 06:53 PM
  #3  
Banned
 
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
Default

I would look at the Janome MC500e. It has 4 hoops the largest being an 8x11" quilting hoop. Very easy to learn, large color screen, excellent editing capabilities and IMO, more user friendly than Brother machines.

Cari
Cari-in-Oly is offline  
Old 04-06-2017, 02:19 AM
  #4  
Senior Member
 
Join Date: Oct 2013
Posts: 673
Default

I went down this path a few years ago. I specifically bought a Janome MC12000 to be able to quilt an E2E pattern. It is doable. And the stitching is wonderful.
A few things to consider: Rehooping. On an average size quilt it can take as many as 60 rehoops. It isn't as easy as hooping a crossstitch project. The sandwich is thick. It's difficult to do with the quilt under the throat. It takes a lot of hand strength also. It's that or remove the quilt from the machine each and every time.

I was interested in the meander that is provided with the machine. It is very dense. Much tighter than I expected and there's no way to alter it without editing software.

There is a program out there by Amelie Scott that incorporates lots of designs that are great. I did several of those on baby quilts. Attempting a full size bed quilt would be aggravating.

I'm not trying to kill your joy but wanted you to consider some of the issues involved. I'm not into embroidery at all. So that part of a very expensive machine sits idle.
sval is offline  
Old 04-06-2017, 03:52 AM
  #5  
Power Poster
 
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
Default

I know many folks do it, but I was never successful. Re hooping, aligning the designs from one hooping to the next was not fun or easy to me and I had been using the embroidery machine for 5 years before I started to quilt. I also had an issue supporting the quilt so it didn't catch on anything. I had to stand there and hold part of the sandwich the whole time. I did use it for QAYG type throws where you quilt the blocks individually then join and also did a couple of outer borders using an endless hoop, but not the center.
PaperPrincess is offline  
Old 04-06-2017, 05:24 AM
  #6  
Super Member
 
Dolphyngyrl's Avatar
 
Join Date: Jan 2009
Location: Southern California
Posts: 6,254
Default

I would get a decent size hoop because there is a lot of hooping and the bigger the less hooping involved
Dolphyngyrl is offline  
Old 04-06-2017, 11:34 AM
  #7  
Power Poster
 
RedGarnet222's Avatar
 
Join Date: Jan 2009
Location: Reno, Nv
Posts: 16,515
Default

I was watching a video just a couple days ago about quilting with the embroidery machine on u tube. The one lady had a babylock machine that had the neatest hoop. It had a knob you turned to tighten it into place very easily. You might want to check out u tube to see that. You could also use a memory stick to get your designs from on line.
I bought a magna hoop that is magnetized I plan on trying out soon. I will let you know just how that works out.
RedGarnet222 is offline  
Old 04-06-2017, 09:45 PM
  #8  
Senior Member
 
Join Date: Aug 2014
Location: Houston, TX
Posts: 817
Default

I chose the H Viking T50 embroidery machine and have had success quilting with it. I posted my first attempt, http://www.quiltingboard.com/picture...e-t271909.html

Best wishes with your search
FabQuilter is offline  
Old 04-07-2017, 07:38 AM
  #9  
Super Member
 
Join Date: Aug 2007
Location: South Puget Sound, Wa. State
Posts: 2,462
Default

I love my Brother machines...
Just a quick tip for quilting using the embroidery machines...
Use a large table if you can or use the machine on the floor to pool the quilt around the machine to avoid pulling and shifting.
Kirsten
ScubaK is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NZquilter
Main
14
05-07-2017 02:01 PM
greengirl
Main
19
02-01-2015 01:04 PM
craftybear
Links and Resources
6
11-18-2010 06:44 PM
Chay
Main
11
04-20-2010 04:27 PM
craftybear
Links and Resources
0
04-07-2010 03:57 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter