Go Back  Quiltingboard Forums > Main
A very easy way to make ruffles..... >

A very easy way to make ruffles.....

A very easy way to make ruffles.....

Old 10-31-2012, 07:12 AM
  #1  
Senior Member
Thread Starter
 
kellen46's Avatar
 
Join Date: Aug 2010
Posts: 811
Lightbulb A very easy way to make ruffles.....

I saw this method demonstrated on YouTube, sorry to say I lost the link. However it is so simple and effective I thought to pass it on. Here it is, set your tension to #8 and stitch length to #5. If you cannot do either of these things then this won't work for you. However once things are set just sew along the edge. Do not back stitch and be sure to leave at least 4inch thread tales on either end. The gathers are easily then adjusted as needed. I recently needed to add ruffles to a curved hem on aprons, this worked great. I just pinned at the center and ends of the seam and adjusted the ruffles as I pinned along the perimeter. Of course this is basically a basting stitch so you do need to over sew the gathers with a regular stitch length and tension. I have a ruffling-foot and a gathering foot but I found this a very easy solution to how to get the gathers to fit in the seam you are trying to match it with. If anyone has a link to the You Tube video on the gathering technique please post it so they can get credit for this idea.
Another tip I found helpful is if you have a serger and can do a rolled hem stitch, then I just finish the bottom edge rather than hem it. I use all four threads, widest seam width setting and a short stitch setting. Then I get out some bright variegated serger threads and finish off the bottom edge this way. It adds a pop of color, and gives the edge a clean hemmed finish. It adds a decorative edge to the ruffle. It is also a great and easy way to do a quick finish to kitchen towels and wash cloths.
kellen46 is offline  
Old 10-31-2012, 07:18 AM
  #2  
Super Member
 
Join Date: Apr 2011
Location: Bosque County, Texas
Posts: 2,709
Default

Check your instructions on your serger. My serger will make ruffles. That would have been the easiest of all.
TanyaL is offline  
Old 10-31-2012, 08:05 AM
  #3  
Super Member
 
GrannieAnnie's Avatar
 
Join Date: Aug 2010
Location: S. W. Indiana
Posts: 7,484
Default

Originally Posted by kellen46 View Post
I saw this method demonstrated on YouTube, sorry to say I lost the link. However it is so simple and effective I thought to pass it on. Here it is, set your tension to #8 and stitch length to #5. If you cannot do either of these things then this won't work for you. However once things are set just sew along the edge. Do not back stitch and be sure to leave at least 4inch thread tales on either end. The gathers are easily then adjusted as needed. I recently needed to add ruffles to a curved hem on aprons, this worked great. I just pinned at the center and ends of the seam and adjusted the ruffles as I pinned along the perimeter. Of course this is basically a basting stitch so you do need to over sew the gathers with a regular stitch length and tension. I have a ruffling-foot and a gathering foot but I found this a very easy solution to how to get the gathers to fit in the seam you are trying to match it with. If anyone has a link to the You Tube video on the gathering technique please post it so they can get credit for this idea.
Another tip I found helpful is if you have a serger and can do a rolled hem stitch, then I just finish the bottom edge rather than hem it. I use all four threads, widest seam width setting and a short stitch setting. Then I get out some bright variegated serger threads and finish off the bottom edge this way. It adds a pop of color, and gives the edge a clean hemmed finish. It adds a decorative edge to the ruffle. It is also a great and easy way to do a quick finish to kitchen towels and wash cloths.

I don't change my tension but that is the way I've made ruffles the 60 +/- years I've been sewing.
GrannieAnnie is offline  
Old 10-31-2012, 08:15 AM
  #4  
Super Member
 
Join Date: Mar 2012
Location: Texas, USA
Posts: 5,896
Default

I was taught to do two rows of basting (similar to this method), for gathering. Pin each end, to seam line. Then fold to center of ruffle, matching center of seam line. Pin. Then fold to center of each piece, between pins. Match and pin. Depending upon the expanse to be sewn, this may be done several more times, before adjusting ruffles and sewing together. Been sewing over 50 years.
Neesie is offline  
Old 10-31-2012, 08:16 AM
  #5  
Super Member
 
Join Date: Jan 2011
Posts: 6,006
Default

When my kids were little and I sewed a lot of clothes that was the way I made ruffles!
Grandma Bonnie is offline  
Old 10-31-2012, 08:45 AM
  #6  
Super Member
 
Join Date: Nov 2010
Location: Cadillac, MI
Posts: 6,487
Default

I second the two rows of stitching. I have done this nearly 60 years. I've even used three rows on very full garments. I would never use a single row on anything.
irishrose is offline  
Old 10-31-2012, 09:37 AM
  #7  
Junior Member
 
Join Date: Oct 2010
Posts: 255
Default

Ditto everything Neesie said. I also still use many of those techniques we had to master in junior high home-ec class to get a decent grade.
peacebypiece is offline  
Old 10-31-2012, 11:50 AM
  #8  
Power Poster
 
Jingle's Avatar
 
Join Date: Dec 2009
Location: Outside St. Louis
Posts: 38,181
Default

I'm with Neesie. I was taught this way of making ruffles and that is the only way I would do it. One thread only
is likely to break then you have to start over. I never adjusted the tension, just used the longest stitch the machine had. I have been sewing 52 years. Some tips are good and sometimes the old ways work better.
Jingle is offline  
Old 10-31-2012, 01:06 PM
  #9  
Super Member
 
LivelyLady's Avatar
 
Join Date: Dec 2010
Location: Western MA
Posts: 2,720
Default

Originally Posted by TanyaL View Post
Check your instructions on your serger. My serger will make ruffles. That would have been the easiest of all.
That's how I make my ruffles, too.
LivelyLady is offline  
Old 10-31-2012, 01:55 PM
  #10  
Power Poster
 
Join Date: Nov 2009
Location: Mableton, GA
Posts: 11,178
Default

The way I have used recently is to zig zag over a thick piece of thread (some recommend dental floss) without catching it and then gather to desired length and when done sewing, pull out the thick thread/floss.
Stitchnripper is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
carolaug
Links and Resources
32
03-02-2011 05:26 AM
Airwick156
Pictures
23
01-27-2011 08:50 AM
Sue Fish
General Chit-Chat (non-quilting talk)
18
12-20-2010 03:25 PM
calicocat
Main
20
05-09-2010 10:09 PM
sondray
Links and Resources
0
01-24-2009 05:53 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter