Go Back  Quiltingboard Forums >
  • Main
  • What is the best way to shrink fabric? >
  • What is the best way to shrink fabric?

  • What is the best way to shrink fabric?

    Thread Tools
     
    Old 10-22-2012, 05:18 PM
      #1  
    Junior Member
    Thread Starter
     
    Join Date: Oct 2012
    Location: North Dakota
    Posts: 258
    Default What is the best way to shrink fabric?

    I am trying to pre wash and shrink my fabric, its the Legacy studio 100% black cotton from joann fabrics. I realize that it will fade some and shrink some, I wanted to get the most harsh shrink done before I put it on the back of my queen size quilt. Should I wash it and dry on hot? or should I just wash it as instructed on the bolt and dry it on air fluff?
    -also when I put it on the back of my quilt, I should do the seams horizontal with a 1/2" seam allowance correct?
    Thanks
    QuiltingByCourtney is offline  
    Old 10-22-2012, 05:34 PM
      #2  
    Super Member
     
    Join Date: Apr 2011
    Location: Bosque County, Texas
    Posts: 2,709
    Default

    The hottest water may make the color bleed, but you can test that before washing the whole piece. The hottest temperature on the dryer will shrink the fabric the most and will not fade the fabric but may give you horrible wrinkles. A cool drying temperature will not shrink the fabric at all. I would test the color with boiling water. Then wash accordingly.
    I would fold the fabric and pin with safety pins or baste before washing - actually rinsing as it shouldn't need any soap- and dry folded, pinned or basted so that the wrinkles are minimized and pressing is much less.
    TanyaL is offline  
    Old 10-22-2012, 05:50 PM
      #3  
    Junior Member
    Thread Starter
     
    Join Date: Oct 2012
    Location: North Dakota
    Posts: 258
    Default

    Ok thank you so much TanyaL Ill do that
    QuiltingByCourtney is offline  
    Old 10-22-2012, 06:03 PM
      #4  
    Super Member
     
    Join Date: Mar 2011
    Location: Peotone IL
    Posts: 2,802
    Default

    Take the fabric out of the dryer before it is completely dry and then press it. It won't be nearly as wrinkled than if you'd let it dry completely in the dryer.
    gramajo is offline  
    Old 10-22-2012, 08:25 PM
      #5  
    Super Member
     
    Join Date: Mar 2011
    Location: Mechanicsville, IA
    Posts: 1,497
    Default

    I would suggest adding Retayne to the wash water to set the color and reduce bleeding. Throw 1/2 a cheer color catcher in with the fabric. If it comes out with color wash again with other 1/2 color catcher. Repeat til color catcher comes out nearly white. You will have solved both bleeding and shrinking problem.
    Silver Needle is offline  
    Old 10-23-2012, 03:48 AM
      #6  
    Power Poster
     
    Join Date: Dec 2010
    Location: Michigan
    Posts: 11,276
    Default

    If you need a seam the backing, a half inch seam allowance is used and is normally pressed open. As far as horizontal or vertical, most long arm quilters would prefer the seam horizontal, but if you are going to quilt it yourself on a domestic machine or by hand it really doesn't matter which way the seam runs.
    PaperPrincess is offline  
    Old 10-23-2012, 03:52 AM
      #7  
    Power Poster
     
    QuiltnNan's Avatar
     
    Join Date: Mar 2011
    Location: western NY formerly MN, FL, NC, SC
    Posts: 51,430
    Default

    i always wash/dry my fabric in the harshest way possible. if i'm giving the quilt away, i have no idea what the recipient will do with it. so i want to be sure that the quilt is ready for the worst possible scenario.
    QuiltnNan is offline  
    Old 10-23-2012, 04:12 AM
      #8  
    Power Poster
     
    Join Date: Feb 2009
    Location: Northern Michigan
    Posts: 12,861
    Default

    it's ok to wash in cool water if you are concerned about fading- the hot dryer is where your shrinkage occurs.
    ckcowl is offline  
    Old 10-23-2012, 06:38 AM
      #9  
    Senior Member
     
    Join Date: Sep 2012
    Location: Killeen, Texas
    Posts: 329
    Default

    Yes, cold water wash with Retayne, testing with color catcher. HOT dryer temp. Great tip on folding and pinning/basting before tossing in the dryer! I personally like the look of horizontal seams. They are typically sewn with 1/2" allowance and I always press them open. But as PaperPrincess mentioned, the directions of the backing seams really don't matter if you are quilting it yourself on your sewing machine or by hand.
    batikmystique is offline  
    Old 10-23-2012, 07:22 AM
      #10  
    Super Member
     
    Join Date: Apr 2010
    Location: Illinois
    Posts: 9,312
    Default

    The shrinkage will happen in the dryer on the hot setting. So it really does not matter what temp the wash water is for shrinking purposes. Do dry it completely as to get the full shrinkage !
    Lori S is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    nantucketsue
    Main
    12
    06-01-2012 08:07 PM
    hunters grammy
    Main
    2
    01-26-2012 07:32 PM
    ChubbyBunny
    Main
    9
    03-26-2011 01:42 PM
    ajw
    Main
    13
    07-07-2010 03:52 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter