What do you use for your FMQ presser foot?
#1
Well, this site has inspired me to want to give FMQ a try. I went on-line to order a presser foot for my Singer Futura CE-150 (low shank/snap on) and found too many choices! There were plastic ones with 1/4 and 1/2" markings, metal circles, metal open circles, big foot, some have the springy-thingy on top, some don't...I'm confused! What serves you the best? Have you had any problems with the plastic breaking? Thanks in advance for your help!
#4
Senior Member
Join Date: Nov 2010
Location: Pacific NW
Posts: 649
It all comes down to preference. The one thing that I really like is an open toe. I like to clearly see where the needle goes into the fabric. I don't like the Big Foot ones or anything with the clear plastic encircling the entire stitching area. I bought an $80 free motion conversion kit for my Janome where there are three different feet to try. And you know what? I found that my favorite FM foot is the basic darning foot one that came standard with the machine :) Figures.
Check out Leah Day's site on FMQ. She even gives tips to customizing a foot if you wind up with one you don't like. Good luck!
Check out Leah Day's site on FMQ. She even gives tips to customizing a foot if you wind up with one you don't like. Good luck!
#5
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
For FMQ, you definitely need a foot with a spring. This type of foot is called a "jumping" foot. This foot needs to press down to hold the quilt sandwich in place when the needle is down and a stitch is being made, then move back up with the needle so you can move the quilt sandwich.
I like a small, round, clear, open-toe foot. Gives me the best visibility.
I like a small, round, clear, open-toe foot. Gives me the best visibility.
#7
Super Member
Join Date: Apr 2011
Posts: 3,812
I love the open metal circle foot, with spring. I have tried the plastic ones, the closed metal circles, and others that came with machines. I was so frustrated trying to fmq (after taking fmq classes from three different teachers). At last class another student noticed my quilting foot and said here borrow mine and try. It felt like a total different experience with the open-circle metal/spring quilting foot (sometimes called darning foot). It also has the arm that hooks over the screw so the foot goes up and down nicely. It still takes lots of practise to fmq, but I am now improving since I got this type of foot.
Good luck and I hope you find a foot that works well for you and your machine.
Kat
Good luck and I hope you find a foot that works well for you and your machine.
Kat
Thread
Thread Starter
Forum
Replies
Last Post
BuzzinBumble
Links and Resources
17
06-04-2012 06:34 AM