Need idea

Old 04-26-2013, 07:46 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Jul 2012
Location: by the lake in piney woods of e. texas
Posts: 150
Default Need idea

I have 2 of those cutting tables think came from hancocks million years ago u know it rolls and ends lift up to make cutting area or fold down to save space. Well my problem with height is different. Most need something to make cutting tables higher i am only. 5 ft. Seem to be shrinking as I age too!! So these cutting tables are a tad too high to be really comfortable. So do I scrap them or is there something. I can do to make these more comfortable? I am getting ready to empty my sewing room paint walls a creamy yellow and all the furniture some color so it all blends together better. This was my mil sewing room it's been 2 years she's been gone so am ready to make it mine. Figured smart as people on this board are someone could tell me about the cutting tables! Thanks!
Txsuthrn is offline  
Old 04-26-2013, 11:06 AM
  #2  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,444
Default

​Do they have legs you can cut down? Can you post a picture so we have a better idea of what they look like?
Tartan is offline  
Old 04-26-2013, 11:59 AM
  #3  
Super Member
 
Join Date: Mar 2011
Location: Central NJ
Posts: 5,570
Default

I have the same table; same issue...I'm 5'2" so it's really a tad high for me to be comfortable. Easiest solution I can come up with is to remove the wheels on the bottom. This does, however, delete some of the versatility of these tables. I honestly can't remember the last time I folded mine down - either or both sides - so I'm seriously considering this myself.
NJ Quilter is offline  
Old 04-26-2013, 01:39 PM
  #4  
Senior Member
 
Join Date: Sep 2011
Location: Western NY
Posts: 841
Default

Those tables aren't cheap. I would think the "right height" step stool would work well. Maybe something 12' by ?? feet. That way you wouldn't have to move it much.
MarLeClair is offline  
Old 04-26-2013, 02:11 PM
  #5  
Power Poster
 
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,680
Default

I wouldn't go for a step stool or any sort of a platform ... too easy to fall off, and sprain/break your leg/ankle!

Ditto ... consider removing the wheels
Another option would be to have someone cut a few inches off the legs of the tables. Just be sure first as to what height you want it to be.
QuiltE is offline  
Old 04-26-2013, 03:15 PM
  #6  
Super Member
 
kitsykeel's Avatar
 
Join Date: Sep 2010
Location: Salisbury, North Carolina
Posts: 1,046
Default

If the legs are wooden, a section could be cut out to make it the correct height for you. Then drill a hole in both ends of the leg where it has been cut and place a rod or dowel into the holes. Use wood glue to hold it in place. That way you can keep the wheels on the end of the legs. Good luck with whatever you do. And yes we are shrinking with age. I am down to 5'1" from 5'3". And I now know where the height we lose goes. Around our middles. Isn't that strange!
kitsykeel is offline  
Old 04-26-2013, 03:43 PM
  #7  
Super Member
 
Join Date: Oct 2011
Location: South Central Indiana
Posts: 1,931
Default

Remove the wheels and place those "slider" pads under the feet.
QuiltingVagabond is offline  
Old 04-26-2013, 05:31 PM
  #8  
Super Member
 
Join Date: Sep 2010
Location: Myrtle Beach, SC
Posts: 8,087
Default

Good Idea!
cathyvv is offline  
Old 04-26-2013, 06:55 PM
  #9  
Junior Member
Thread Starter
 
Join Date: Jul 2012
Location: by the lake in piney woods of e. texas
Posts: 150
Default

Originally Posted by kitsykeel View Post
If the legs are wooden, a section could be cut out to make it the correct height for you. Then drill a hole in both ends of the leg where it has been cut and place a rod or dowel into the holes. Use wood glue to hold it in place. That way you can keep the wheels on the end of the legs. Good luck with whatever you do. And yes we are shrinking with age. I am down to 5'1" from 5'3". And I now know where the height we lose goes. Around our middles. Isn't that strange!
Lol that's about right
Txsuthrn is offline  
Old 04-26-2013, 06:58 PM
  #10  
Junior Member
Thread Starter
 
Join Date: Jul 2012
Location: by the lake in piney woods of e. texas
Posts: 150
Default

Originally Posted by QuiltingVagabond View Post
Remove the wheels and place those "slider" pads under the feet.
Now that is a good idea! I did think of removing the wheels
But hated to lose the "movability". I knew this smart board would come up with a solution. Thank you!
Txsuthrn is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Arizona Sunrises
Pictures
189
01-31-2012 11:18 AM
Tigerbaby1981
Main
8
07-17-2008 03:35 AM
kyssyfur
Main
6
05-01-2008 02:20 PM
PurplePassion
Main
23
11-04-2007 11:51 PM
Flying_V_Goddess
Main
27
04-18-2007 12:33 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter